esphome-docs/components/ethernet.rst
Otto Winter f4c1d31a1d
Revert "Remove disqus"
This reverts commit 19a22e8b39.
2019-03-06 11:02:03 +01:00

94 lines
2.8 KiB
ReStructuredText

Ethernet Component
==================
.. seo::
:description: Instructions for setting up the Ethernet configuration for your ESP32 node in ESPHome.
:image: ethernet.png
:keywords: Ethernet, ESP32
This core ESPHome component sets up ethernet connections for ESP32s.
Ethernet for ESP8266 is not supported.
.. code-block:: yaml
# Example configuration entry
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO0_IN
phy_addr: 0
# Optional manual IP
manual_ip:
static_ip: 10.0.0.42
gateway: 10.0.0.1
subnet: 255.255.255.0
Configuration variables:
------------------------
- **type** (**Required**, string): The type of LAN chipset. Must be one of
``LAN8720`` or ``TLK110`` (see datasheet for more details).
- **mdc_pin** (**Required**, :ref:`config-pin`): The MDC pin of the board.
Usually this is ``GPIO23``.
- **mdio_pin** (**Required**, :ref:`config-pin`): The MDIO pin of the board.
Usually this is ``GPIO18``.
- **clk_mode** (*Optional*, string): The clock mode of the data lines, this must be one
of these values: (see datasheet of your board for more details)
- ``GPIO0_IN`` (Default) - External clock
- ``GPIO0_OUT`` - Internal clock
- ``GPIO16_OUT`` - Internal clock
- ``GPIO17_OUT`` - Internal clock
- **phy_addr** (*Optional*, int): The PHY addr type of the ethernet controller. Defaults to 0.
- **power_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The pin with which
to control the power of the board. Leave unspecified for no power pin (default)
- **manual_ip** (*Optional*): Manually configure the static IP of the node.
- **static_ip** (*Required*, IPv4 address): The static IP of your node.
- **gateway** (*Required*, IPv4 address): The gateway of the local network.
- **subnet** (*Required*, IPv4 address): The subnet of the local network.
- **dns1** (*Optional*, IPv4 address): The main DNS server to use.
- **dns2** (*Optional*, IPv4 address): The backup DNS server to use.
- **domain** (*Optional*, string): Set the domain of the node hostname used for uploading.
For example, if it's set to ``.local``, all uploads will be sent to ``<HOSTNAME>.local``.
Defaults to ``.local``.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
Configuration for wESP32 board
------------------------------
.. code-block:: yaml
ethernet:
type: LAN8720
mdc_pin: GPIO16
mdio_pin: GPIO17
clk_mode: GPIO0_IN
phy_addr: 0
Configuration for Olimex ESP32-POE
----------------------------------
.. code-block:: yaml
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO17_OUT
phy_addr: 0
power_pin: GPIO12
See Also
--------
- :apiref:`wifi_component.h`
- :ghedit:`Edit`
.. disqus::