esphome-docs/components/sensor/rotary_encoder.rst
Otto Winter 9d6c814991
Remove disqus
They started injecting ads :(
2019-03-24 14:54:58 +01:00

73 lines
2.8 KiB
ReStructuredText

Rotary Encoder Sensor
=====================
.. seo::
:description: Instructions for setting up rotary encoders.
:image: rotary_encoder.jpg
The ``rotary_encoder`` sensor platform allows you to use any continuous-rotation
rotary encoders with ESPHome. These devices usually have two pins with which
they encode the rotation. Every time the knob of the rotary encoder is turned, the
signals of the two pins go HIGH and LOW in turn. See
`this Arduino article <https://playground.arduino.cc/Main/RotaryEncoders>`__ to gain
a better understanding of these sensors.
.. figure:: images/rotary_encoder.jpg
:align: center
:width: 75.0%
Example of a continuous rotary encoder. Pin ``+`` is connected to ``3.3V``,
``GND`` is connected to ``GND``, and ``CLK`` & ``DT`` are A & B.
.. figure:: /components/sensor/images/rotary_encoder-ui.png
:align: center
:width: 75.0%
To use rotary encoders in ESPHome, first identify the two pins encoding th step value.
These are often called ``CLK`` and ``DT`` as in above image. Note if the values this sensor
outputs go in the wrong direction, you can just swap these two pins.
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: rotary_encoder
name: "Rotary Encoder"
pin_a: D1
pin_b: D2
Configuration variables:
------------------------
- **pin_a** (**Required**, :ref:`Pin Schema <config-pin_schema>`):
The first pin for determining the step value. Must not be a pin from an external I/O expander.
- **pin_b** (**Required**, :ref:`Pin Schema <config-pin_schema>`):
The second pin for determining the step value. Must not be a pin from an external I/O expander.
- **name** (**Required**, string): The name of the rotary encoder sensor.
- **pin_reset** (*Optional*, :ref:`Pin Schema <config-pin_schema>`):
An optional pin that resets the step value. This is useful with rotary encoders that have have a
third pin. Defaults to no reset pin.
- **resolution** (*Optional*, string): The resolution of the sensor, this controls how many
pulses are generated by one step:
- 1 (default)
- 2
- 4
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **min_value** (*Optional*, int): The minimum value this rotary encoder will go to, turning
the knob further will not decrease the number. Defaults to no minimum.
- **max_value** (*Optional*, int): The maximum value this rotary encoder will go to, turning
the knob further will not increase the number. Defaults to no maximum.
- All other options from :ref:`Sensor <config-sensor>`.
See Also
--------
- :ref:`sensor-filters`
- :doc:`pulse_counter`
- :doc:`template`
- `Mechanical Input Library <https://github.com/jkDesignDE/MechInputs>`__ by `Jochen Krapf <https://github.com/JK-de>`__
- :apiref:`sensor/rotary_encoder.h`
- :ghedit:`Edit`