mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-10 10:11:29 +01:00
9daf7e9a36
From a report here: https://github.com/esphome/issues/issues/2887#issuecomment-1741934563 This was introduced in this change: https://github.com/esphome/esphome-docs/pull/3149
65 lines
2.3 KiB
ReStructuredText
65 lines
2.3 KiB
ReStructuredText
SHT3X-D Temperature+Humidity Sensor
|
|
===================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up SHT31-D/SHT3x temperature and humidity sensors
|
|
:image: sht3xd.jpg
|
|
|
|
The ``sht3xd`` sensor platform Temperature+Humidity sensor allows you to use your Sensirion SHT31-D/SHT3x
|
|
(`datasheet <https://cdn-shop.adafruit.com/product-files/2857/Sensirion_Humidity_SHT3x_Datasheet_digital-767294.pdf>`__,
|
|
`Adafruit`_ ) sensors with
|
|
ESPHome. The :ref:`I²C Bus <i2c>` is
|
|
required to be set up in your configuration for this sensor to work.
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/2857
|
|
|
|
.. figure:: images/temperature-humidity.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: sht3xd
|
|
temperature:
|
|
name: "Living Room Temperature"
|
|
humidity:
|
|
name: "Living Room Humidity"
|
|
address: 0x44
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **temperature** (**Required**): The information for the temperature sensor.
|
|
|
|
- **name** (**Required**, string): The name for the temperature sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **humidity** (**Required**): The information for the humidity sensor.
|
|
|
|
- **name** (**Required**, string): The name for the humidity sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of the sensor.
|
|
Defaults to ``0x44``.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
- **heater_enabled** (*Optional*, bool): Turn on/off heater at boot. This may help provide `more accurate readings in condensing conditions <https://forum.arduino.cc/t/atmospheric-sensors-in-condensing-conditions/412167>`_, but can also increase temperature readings and decrease humidity readings as a side effect.
|
|
Defaults to ``true``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`absolute_humidity`
|
|
- :doc:`dht`
|
|
- :doc:`dht12`
|
|
- :doc:`hdc1080`
|
|
- :doc:`htu21d`
|
|
- :apiref:`sht3xd/sht3xd.h`
|
|
- :ghedit:`Edit`
|