mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-08-19 22:33:14 +02:00
150 lines
4.9 KiB
ReStructuredText
150 lines
4.9 KiB
ReStructuredText
MY9231/MY9291 LED driver Component
|
|
==================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MY9231 and MY9291 LED drives in esphomelib.
|
|
:image: my9231.png
|
|
:keywords: MY9231, MY9291, Sonoff B1, Ai-thinker AiLight WiFi light bulb, Arilux E27 Smart Bulb
|
|
|
|
The MY9231/MY9291 component represents a MY9231/MY9291 LED diver chain
|
|
(`MY9231 description <http://www.my-semi.com.tw/file/MY9231_BF_0.91.pdf>`__,
|
|
`MY9291 description <http://www.my-semi.com.tw/file/MY9291_BF_0.91.pdf>`__) in
|
|
esphomelib. Communication is done with two GPIO pins (DI and DCKI) and multiple
|
|
driver chips can be chained. There are two models with different number of
|
|
output channels (MY9291 with 4 channels and MY9231 with 3 channels). They are
|
|
popular driver chips used in smart light blubs:
|
|
|
|
- Sonoff B1 (MY9231)
|
|
- Ai-Thinker AiLight WiFi light bulb (MY9291)
|
|
- Arilux E27 Smart Bulb (MY9231)
|
|
|
|
To use the channels of this components, you first need to setup the
|
|
global ``my9231`` hub and give it an id, and then define the
|
|
:doc:`individual output channels </esphomeyaml/components/output/my9231>`.
|
|
|
|
.. note::
|
|
|
|
One of the features of the MY9231/MY9291 driver is that the chips
|
|
remember their state after a power cycling. Unfortunately, the
|
|
state of the driver can not be read. Therefore, if esphomelib can
|
|
not restore the previous state, it will result in a mismatch of
|
|
the driver output and the internal state (= MQTT state). So you
|
|
can configure the behaviour on boot time:
|
|
|
|
``update_on_boot: True``
|
|
On device power up/boot, the light may flash shortly, to the
|
|
state before powering off.
|
|
|
|
``update_on_boot: False``
|
|
On device power up/boot, the light show the last state, but the
|
|
internal data will not reflect this state. Thus, the first fade
|
|
is wrong, as well as the MQTT state.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
my9231:
|
|
- data_pin: GPIO12
|
|
clock_pin: GPIO14
|
|
|
|
# Individual outputs
|
|
output:
|
|
- platform: my9231
|
|
id: 'my9231_output1'
|
|
channel: 0
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **data_pin** (**Required**, :ref:`config-pin_schema`): The pin which DI is connected
|
|
to.
|
|
- **clock_pin** (**Required**, :ref:`config-pin_schema`): The pin which DCKI is
|
|
connected to.
|
|
- **num_channels** (*Optional*, int): Total number of channels of the whole
|
|
chain. Must be in range from 3 to 1020. Defaults to 6.
|
|
- **num_chips** (*Optional*, int): Number of chips in the chain. Must be
|
|
in range from 1 to 255. Defaults to 2.
|
|
- **bit_depths** (*Optional*, int): The bit depth to use for all output
|
|
channels in this chain. Must be one of 8, 12, 14 or 16. Defaults to 16.
|
|
- **update_on_boot** (*Optional*, boolean): Update/reset duty data at boot. Defaults to ``True``.
|
|
- **id** (*Optional*, :ref:`config-id`): The id to use for
|
|
this ``my9231`` component. Use this if you have multiple MY9231/MY9291 chains
|
|
connected at the same time.
|
|
|
|
Sonoff B1 configuration example
|
|
-------------------------------
|
|
|
|
This component can be used with a Sonoff B1 smart light blub. To flash
|
|
the Sonoff B1, open the plastic cover and connect/solder wires to the
|
|
PCB pads (3.3V, RX, TX, GND, GPIO0). If you connect GPIO0 to GND
|
|
during power up, the device enters flash mode. For more information
|
|
about flashing Sonoff devices, see:
|
|
:doc:`/esphomeyaml/devices/sonoff_s20`. All LEDs are connected to a
|
|
chain of two MY9321 chips that are connected to GPIO12 and GPIO14. A
|
|
complete configuration for a Sonoff B1 looks like:
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphomeyaml:
|
|
name: <NAME_OF_NODE>
|
|
platform: ESP8266
|
|
board: esp01_1m
|
|
board_flash_mode: dout
|
|
|
|
wifi:
|
|
ssid: <YOUR_SSID>
|
|
password: <YOUR_WIFI_PASSPHRASE>
|
|
|
|
mqtt:
|
|
broker: <YOUR_MQTT_BROKER>
|
|
username: <YOUR_MQTT_USERNAME>
|
|
password: <YOUR_MQTT_PASSWORD>
|
|
|
|
logger:
|
|
|
|
ota:
|
|
password: <YOUR_OTA_PASSWORD>
|
|
|
|
my9231:
|
|
data_pin: GPIO12 # GPIO13 for AiLight
|
|
clock_pin: GPIO14 # GPIO15 for AiLight
|
|
num_channels: 6
|
|
num_chips: 2
|
|
|
|
output:
|
|
- platform: my9231
|
|
id: output_blue
|
|
channel: 0
|
|
- platform: my9231
|
|
id: output_red
|
|
channel: 1
|
|
- platform: my9231
|
|
id: output_green
|
|
channel: 2
|
|
- platform: my9231
|
|
id: output_warm_white
|
|
channel: 4
|
|
- platform: my9231
|
|
id: output_cold_white
|
|
channel: 5
|
|
|
|
light:
|
|
- platform: rgbww
|
|
name: <LIGHT_NAME>
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
cold_white: output_cold_white
|
|
warm_white: output_warm_white
|
|
cold_white_color_temperature: 6500 K
|
|
warm_white_color_temperature: 2800 K
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`output/my9231`
|
|
- :doc:`API Reference </api/output/my9231>`
|
|
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/my9231.rst>`__
|
|
|
|
.. disqus::
|