mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-17 11:05:39 +01:00
301 lines
10 KiB
ReStructuredText
301 lines
10 KiB
ReStructuredText
Midea Air Conditioner
|
|
=====================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a Midea climate device
|
|
:image: air-conditioner.svg
|
|
|
|
The ``midea`` component creates a Midea air conditioner climate device.
|
|
|
|
.. note::
|
|
|
|
This protocol also used by some vendors:
|
|
|
|
- `Electrolux <https://www.electrolux.ru/>`_
|
|
- `Qlima <https://www.qlima.com/>`_
|
|
- `Artel <https://www.artelgroup.com/>`_
|
|
- `Carrier <https://www.carrier.com/>`_
|
|
- `Comfee <http://www.comfee-russia.ru/>`_
|
|
- `Inventor <https://www.inventorairconditioner.com/>`_
|
|
- `Senville <https://senville.com/>`_
|
|
- and maybe others
|
|
|
|
Control is possible with a custom dongle. Example of hardware implementation is `IoT Uni Dongle <https://github.com/dudanov/iot-uni-dongle>`_.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
|
|
# Disable logging over UART (required)
|
|
logger:
|
|
baud_rate: 0
|
|
|
|
# UART settings for Midea dongle (required)
|
|
uart:
|
|
tx_pin: 1 # hardware dependant
|
|
rx_pin: 3 # hardware dependant
|
|
baud_rate: 9600
|
|
|
|
# Main settings
|
|
climate:
|
|
- platform: midea
|
|
name: Midea Climate # Use a unique name.
|
|
transmitter_id: # Optional. Add this option to use IR transmitter.
|
|
period: 1s # Optional
|
|
timeout: 2s # Optional
|
|
num_attempts: 3 # Optional
|
|
autoconf: true # Autoconfigure most options.
|
|
beeper: true # Beep on commands.
|
|
visual: # Optional. Example of visual settings override.
|
|
min_temperature: 17 °C # min: 17
|
|
max_temperature: 30 °C # max: 30
|
|
temperature_step: 0.5 °C # min: 0.5
|
|
supported_modes: # All capabilities in this section detected by autoconf.
|
|
- FAN_ONLY # This capability is always used.
|
|
- HEAT_COOL
|
|
- COOL
|
|
- HEAT
|
|
- DRY
|
|
custom_fan_modes:
|
|
- SILENT
|
|
- TURBO
|
|
supported_presets: # All capabilities in this section detected by autoconf.
|
|
- ECO
|
|
- BOOST
|
|
- SLEEP # This capability is always used.
|
|
custom_presets: # All capabilities in this section detected by autoconf.
|
|
- FREEZE_PROTECTION
|
|
supported_swing_modes:
|
|
- VERTICAL # This capability is always used.
|
|
- HORIZONTAL
|
|
- BOTH
|
|
outdoor_temperature: # Optional. Outdoor temperature sensor (may display incorrect values after long inactivity).
|
|
name: Temp
|
|
power_usage: # Optional. Power usage sensor (only for devices that support this feature).
|
|
name: Power
|
|
humidity_setpoint: # Optional. Indoor humidity sensor (only for devices that support this feature).
|
|
name: Humidity
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :doc:`../uart` if you want
|
|
to use multiple UART buses.
|
|
- **name** (**Required**, string): The name of the climate device.
|
|
- **transmitter_id** (*Optional*, :ref:`config-id`): Set if you use :doc:`../remote_transmitter` component for IR commands transmit.
|
|
- **period** (*Optional*, :ref:`config-time`): Minimal period between requests to the appliance. Defaults to ``1s``.
|
|
- **timeout** (*Optional*, :ref:`config-time`): Request response timeout until next request attempt. Defaults to ``2s``.
|
|
- **num_attempts** (*Optional*, int): Number of request attempts between 1 and 5 inclusive. Defaults to ``3``.
|
|
- **autoconf** (*Optional*, boolean): Get capabilities automatically. Allows you not to manually define most of the capabilities of the appliance.
|
|
Defaults to ``True``.
|
|
- **beeper** (*Optional*, boolean): Beeper feedback on command. Defaults to ``False``.
|
|
- **supported_modes** (*Optional*, list): List of supported modes. Possible values are: ``HEAT_COOL``, ``COOL``, ``HEAT``, ``DRY``, ``FAN_ONLY``.
|
|
- **custom_fan_modes** (*Optional*, list): List of supported custom fan modes. Possible values are: ``SILENT``, ``TURBO``.
|
|
- **supported_presets** (*Optional*, list): List of supported presets. Possible values are: ``ECO``, ``BOOST``, ``SLEEP``.
|
|
- **custom_presets** (*Optional*, list): List of supported custom presets. Possible values are: ``FREEZE_PROTECTION``.
|
|
- **supported_swing_modes** (*Optional*, list): List of supported swing modes. Possible values are: ``VERTICAL``, ``HORIZONTAL``, ``BOTH``.
|
|
- **outdoor_temperature** (*Optional*): The information for the outdoor temperature
|
|
sensor.
|
|
|
|
- **name** (**Required**, string): The name of the sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
- **power_usage** (*Optional*): The information for the current power consumption
|
|
sensor.
|
|
|
|
- **name** (**Required**, string): The name of the sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
- **humidity_setpoint** (*Optional*): The information for the humidity indoor
|
|
sensor (experimental).
|
|
|
|
- **name** (**Required**, string): The name of the sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
- All other options from :ref:`Climate <config-climate>`.
|
|
|
|
Automations
|
|
-----------
|
|
|
|
.. _midea_ac-power_on_action:
|
|
|
|
``midea_ac.power_on`` Action
|
|
******************************
|
|
|
|
This action turn on power. The mode and preset will be restored to the last state before turned off.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.power_on:
|
|
|
|
.. _midea_ac-power_off_action:
|
|
|
|
``midea_ac.power_off`` Action
|
|
******************************
|
|
|
|
This action turn off power.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.power_off:
|
|
|
|
|
|
.. _midea_ac-follow_me_action:
|
|
|
|
``midea_ac.follow_me`` Action
|
|
*****************************
|
|
|
|
This action transmit IR FollowMe command telling the air conditioner a more accurate
|
|
room temperature value to be used instead of the internal indoor unit sensor.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.follow_me:
|
|
temperature: !lambda "return x;"
|
|
beeper: false
|
|
|
|
Configuration variables:
|
|
|
|
- **temperature** (**Required**, float, :ref:`templatable <config-templatable>`): Set the
|
|
value of a internal temperature sensor.
|
|
- **beeper** (*Optional*, boolean, :ref:`templatable <config-templatable>`): set beep on update.
|
|
Defaults to ``False``
|
|
|
|
|
|
.. _midea_ac-display_toggle_action:
|
|
|
|
``midea_ac.display_toggle`` Action
|
|
**********************************
|
|
|
|
This action toggle ac screen. Works via UART if supported or :doc:`../remote_transmitter`.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.display_toggle:
|
|
|
|
|
|
.. _midea_ac-swing_step_action:
|
|
|
|
``midea_ac.swing_step`` Action
|
|
******************************
|
|
|
|
This action adjust the louver by one step. :doc:`../remote_transmitter` required.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.swing_step:
|
|
|
|
|
|
.. _midea_ac-beeper_on_action:
|
|
|
|
``midea_ac.beeper_on`` Action
|
|
******************************
|
|
|
|
This action turn on beeper feedback.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.beeper_on:
|
|
|
|
.. _midea_ac-beeper_off_action:
|
|
|
|
``midea_ac.beeper_off`` Action
|
|
******************************
|
|
|
|
This action turn off beeper feedback.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- midea_ac.beeper_off:
|
|
|
|
|
|
Additional control options using IR commands
|
|
--------------------------------------------
|
|
|
|
It is possible to use the FollowMe function and some other features available only through IR commands.
|
|
Below is an example of how to send FollowMe commands with the values of your sensor using the :doc:`../remote_transmitter`
|
|
component, as well as control the light of the LED display.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
|
|
remote_transmitter:
|
|
pin: GPIO13 # For iot-uni-stick.
|
|
carrier_duty_percent: 100% # 50% for IR LED, 100% for direct connect to TSOP IR receiver output.
|
|
|
|
sensor:
|
|
- platform: homeassistant
|
|
entity_id: sensor.room_sensor # Sensor from HASS
|
|
internal: true
|
|
filters:
|
|
- throttle: 10s
|
|
- heartbeat: 2min # Maximum interval between updates.
|
|
- debounce: 1s
|
|
on_value:
|
|
midea_ac.follow_me:
|
|
temperature: !lambda "return x;"
|
|
beeper: false # Optional. Beep on update.
|
|
|
|
# template momentary switches for sending display control command and swing step actions
|
|
switch:
|
|
- platform: template
|
|
name: Display Toggle
|
|
icon: mdi:theme-light-dark
|
|
turn_on_action:
|
|
midea_ac.display_toggle:
|
|
- platform: template
|
|
name: Swing Step
|
|
icon: mdi:tailwind
|
|
turn_on_action:
|
|
midea_ac.swing_step:
|
|
|
|
|
|
Example of Beeper Control Using a Switch
|
|
----------------------------------------
|
|
|
|
.. code-block:: yaml
|
|
|
|
switch:
|
|
- platform: template
|
|
name: Beeper
|
|
icon: mdi:volume-source
|
|
optimistic: true
|
|
turn_on_action:
|
|
midea_ac.beeper_on:
|
|
turn_off_action:
|
|
midea_ac.beeper_off:
|
|
|
|
Acknowledgments:
|
|
----------------
|
|
|
|
Thanks to the following people for their contributions to reverse engineering the UART protocol and source code in the following repositories:
|
|
|
|
* `Mac Zhou <https://github.com/mac-zhou/midea-msmart>`_
|
|
* `NeoAcheron <https://github.com/NeoAcheron/midea-ac-py>`_
|
|
* `Rene Klootwijk <https://github.com/reneklootwijk/midea-uart>`_
|
|
|
|
Special thanks to the project `IRremoteESP8266 <https://github.com/crankyoldgit/IRremoteESP8266>`_ for describing the IR protocol.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/climate/index`
|
|
- :apiref:`climate/midea_ac.h`
|
|
- :ghedit:`Edit`
|