mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-04 09:10:02 +01:00
88 lines
3.2 KiB
ReStructuredText
88 lines
3.2 KiB
ReStructuredText
Ultrasonic Distance Sensor
|
||
==========================
|
||
|
||
The ultrasonic distance sensor allows you to use simple ultrasonic
|
||
sensors like the HC-SR04
|
||
(`datasheet <https://www.electroschematics.com/wp-content/uploads/2013/07/HC-SR04-datasheet-version-2.pdf>`__,
|
||
`sparkfun <https://www.sparkfun.com/products/13959>`__) with esphomelib
|
||
to measure distances. These sensors usually can’t measure anything more
|
||
than about two meters and may sometimes make some annoying clicking
|
||
sounds.
|
||
|
||
This sensor platform expects a sensor that can be sent a **trigger
|
||
pulse** on a specific pin and will send out a **echo pulse** once a
|
||
measurement has been taken. Because sometimes (for example if no object
|
||
is detected) the echo pulse is never returned, this sensor also has a
|
||
timeout option which specifies how long to wait for values. During this
|
||
timeout period the whole core will be blocked and therefore shouldn’t be
|
||
set too high.
|
||
|
||
.. figure:: images/ultrasonic-full.jpg
|
||
:align: center
|
||
:width: 50.0%
|
||
|
||
HC-SR04 Ultrasonic Distance Sensor.
|
||
|
||
.. figure:: images/ultrasonic-ui.png
|
||
:align: center
|
||
:width: 80.0%
|
||
|
||
.. code:: yaml
|
||
|
||
# Example configuration entry
|
||
sensor:
|
||
- platform: ultrasonic
|
||
trigger_pin: D1
|
||
echo_pin: D2
|
||
name: "Ultrasonic Sensor"
|
||
|
||
Configuration variables:
|
||
------------------------
|
||
|
||
- **trigger_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The output pin to
|
||
periodically send the trigger pulse to.
|
||
- **echo_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The input pin on which to
|
||
wait for the echo.
|
||
- **name** (**Required**, string): The name of the sensor.
|
||
- **timeout_meter** (*Optional*, float): The number of meters for the
|
||
timeout. Use either this or ``timeout_time``. Defaults to 2 meters.
|
||
- **timeout_time** (*Optional*, int): The number of microseconds for
|
||
the timeout. Use either this or ``timeout_meter``. Defaults to
|
||
11662µs.
|
||
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
||
sensor. Defaults to ``15s``. See :ref:`sensor-default_filter`.
|
||
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
||
- All other options from :ref:`Sensor <config-sensor>` and :ref:`MQTT Component <config-mqtt-component>`.
|
||
|
||
Ultrasonic Timeouts
|
||
-------------------
|
||
|
||
The ultrasonic sensor works by sending a small ultrasonic pulse out and then waiting until
|
||
the pulse arrives back. However, there are cases where no such signal arrives back. This is most commonly caused
|
||
by either having the sensor pointed at a soft surface that muffles the incoming signal. The other case where this
|
||
can happen is when the the object is too far away and the timeout set by the ``timeout_meter`` or ``timeout_time``
|
||
option kicks in.
|
||
|
||
To remove ``NAN`` values from the sensor stream, use the ``filter_nan`` :ref:`sensor filter <sensor-filters>`:
|
||
|
||
.. code:: yaml
|
||
|
||
sensor:
|
||
- platform: ultrasonic
|
||
trigger_pin: D1
|
||
echo_pin: D2
|
||
name: "Ultrasonic Sensor"
|
||
filters:
|
||
-
|
||
|
||
|
||
See Also
|
||
--------
|
||
|
||
- :ref:`sensor-filters`
|
||
- :doc:`template`
|
||
- :doc:`API Reference </api/sensor/ultrasonic>`
|
||
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/sensor/ultrasonic.rst>`__
|
||
|
||
.. disqus::
|