mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-30 18:09:26 +01:00
196 lines
5.7 KiB
ReStructuredText
196 lines
5.7 KiB
ReStructuredText
EZO sensor circuits
|
|
===================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up EZO sensor circuits in esphome
|
|
:image: ezo-ph-circuit.png
|
|
:keywords: ezo ph ec rtd sensor circuit esphome
|
|
|
|
The ``ezo`` sensor platform allows you to use your EZO sensor circuits with
|
|
ESPHome. The :ref:`I²C Bus <i2c>` is
|
|
required to be set up in your configuration for this sensor to work.
|
|
All embedded solutions from EZO can be found `here <https://atlas-scientific.com/embedded-solutions/>`__.
|
|
If a certain command is not supported directly, it can be executed with the ``send_custom()`` method call.
|
|
|
|
.. figure:: images/ezo-ph-circuit.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
|
|
- platform: ezo
|
|
id: ph_ezo
|
|
address: 99
|
|
unit_of_measurement: "pH"
|
|
update_interval: 10s
|
|
|
|
- platform: ezo
|
|
id: rtd_ezo
|
|
name: "RTD Temperature"
|
|
address: 102
|
|
accuracy_decimals: 2
|
|
unit_of_measurement: "°C"
|
|
update_interval: 10s
|
|
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **address** (**Required**, int): Specify the I²C address of the sensor.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
Automation triggers:
|
|
|
|
- **on_led** (*Optional*, :ref:`Action <config-action>`): Triggered when the result of ``get_led_state()`` is ready. The LED
|
|
state is provided as a boolean variable named ``x``.
|
|
- **on_device_information** (*Optional*, :ref:`Action <config-action>`): Triggered when the result of ``get_device_information()``
|
|
is ready. The result is provided as a ``std::string`` variable named ``x``.
|
|
- **on_slope** (*Optional*, :ref:`Action <config-action>`): Triggered when the result of ``get_slope()`` is ready. The result
|
|
is provided as a ``std::string`` variable named ``x``.
|
|
- **on_calibration** (*Optional*, :ref:`Action <config-action>`): Triggered when the result of ``get_calibration()`` is ready.
|
|
The result is provided as a ``std::string`` variable named ``x``.
|
|
- **on_t** (*Optional*, :ref:`Action <config-action>`): Triggered when the result of ``get_t()`` is ready. The result is provided
|
|
as a ``std::string`` variable named ``x``.
|
|
- **on_custom** (*Optional*, :ref:`Action <config-action>`): Triggered when the result of ``get_custom()`` is ready. The result is provided as a ``std::string`` variable named ``x``.
|
|
|
|
.. _ezo_lambda_calls:
|
|
|
|
Lambda calls
|
|
------------
|
|
|
|
From :ref:`lambdas <config-lambda>`, you can interact with the sensor in various ways. For any ``get`` command a trigger will be called
|
|
with the information retrieved from the sensor. For more information on the command specifics, refer to the datasheet.
|
|
|
|
- ``set_i2c(uint8_t address)``: Set I2C address of the device, must be an integer between 1 and 127
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_i2c(100);
|
|
|
|
|
|
- ``get_device_information()``: Sensor retrieves calibration and triggers ``on_device_information:`` once done
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).get_device_information();
|
|
|
|
|
|
- ``set_sleep()``: Put the device to sleep
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_sleep();
|
|
|
|
|
|
- ``get_state()``: Performs a read on the current sensor.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).get_state();
|
|
|
|
|
|
- ``get_slope()``: Sensor retrieves slope and triggers ``on_slope:`` once done
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).get_slope();
|
|
|
|
|
|
- ``get_t()``: Sensor retrieves temperature compensation value (in Celcius) and triggers ``on_t:`` once done
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).get_t();
|
|
|
|
|
|
- ``set_t(float value)``: Send the given temperature (in Celcius) to the sensor.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_t("27.00");
|
|
|
|
|
|
- ``set_tempcomp_value(float temp)``: Send the given temperature (in Celcius) to the sensor (this is an alias of `set_t()` for backwards compatibility)
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_tempcomp_value(id(rtd_ezo).state);
|
|
|
|
|
|
- ``get_calibration()``: Sensor retrieves calibration and triggers ``on_calibration:`` once done
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).get_calibration();
|
|
|
|
|
|
- ``set_calibration_generic(float value)``: Sets the calibration with no point.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_calibration_generic(750.0);
|
|
|
|
|
|
- ``set_calibration_point_low(float value)``: Sets the low calibration point.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_calibration_point_low(4.00);
|
|
|
|
|
|
- ``set_calibration_point_mid(float value)``: Sets the medium calibration point.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_calibration_point_mid(7.00);
|
|
|
|
|
|
- ``set_calibration_point_high(float value)``: Sets the high calibration point.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_calibration_point_high(10.00);
|
|
|
|
|
|
- ``clear_calibration()``: Clears all calibration points.
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).clear_calibration();
|
|
|
|
|
|
- ``get_led_state()``: Sensor LED state and triggers ``on_led:`` once done
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).get_led_state();
|
|
|
|
|
|
- ``set_led_state(bool on)``: Sensor LED on or off
|
|
|
|
.. code-block:: cpp
|
|
|
|
id(ph_ezo).set_led_state(true);
|
|
|
|
|
|
- ``send_custom(const std::string &payload, uint16_t delay_ms = 300, bool response_expected = false)``: Runs a custom command. This sends exactly what is in ``payload``. Optionally you can set a ``delay`` and if a response is expected that should be parsed. Defaults to ``false`` for custom commands. Triggers ``on_custom:`` if there's a response.
|
|
|
|
.. code-block:: cpp
|
|
|
|
// Run a custom command to turn on the LED
|
|
id(ph_ezo).send_custom("L,1");
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :apiref:`ezo/ezo.h`
|
|
- :ghedit:`Edit`
|