mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-10 10:11:29 +01:00
71 lines
2.4 KiB
ReStructuredText
71 lines
2.4 KiB
ReStructuredText
MPL3115A2 Barometric Pressure/Altitude/Temperature Sensor
|
|
=========================================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MPL3115A2 atmospheric pressure sensors.
|
|
:image: mpl3115a2.jpg
|
|
:keywords: MPL3115A2
|
|
|
|
The ``mpl3115a2`` sensor platform allows you to use your MPL3115A2 atmospheric pressure sensors
|
|
(`datasheet <https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf>`__,
|
|
`Adafruit`_) temperature and pressure sensors with ESPHome. The :ref:`I²C <i2c>` is
|
|
required to be set up in your configuration for this sensor to work.
|
|
|
|
.. figure:: images/mpl3115a2-full.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
MPL3115A2 Barometric Pressure/Altitude/Temperature Sensor
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/1893
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: mpl3115a2
|
|
temperature:
|
|
name: "MPL3115A2 Temperature"
|
|
pressure:
|
|
name: "MPL3115A2 Pressure"
|
|
update_interval: 10s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
The MPL3115A2 can be configured to output either pressure or altitude depending on which
|
|
sensor is configured.
|
|
|
|
- **pressure** (**Optional**): The information for the pressure sensor.
|
|
|
|
- **name** (**Required**, string): The name for the pressure sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **altitude** (**Optional**): The information for the altitude sensor.
|
|
|
|
- **name** (**Required**, string): The name for the altitude sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **temperature** (**Optional**): The information for the temperature sensor.
|
|
|
|
- **name** (**Required**, string): The name for the temperature sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of
|
|
the sensor. Defaults to ``0x60``.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`bmp280`
|
|
- :doc:`bme280`
|
|
- :doc:`bmp085`
|
|
- :doc:`ms5611`
|
|
- :apiref:`mpl3115a2/mpl3115a2.h`
|
|
- :ghedit:`Edit`
|