mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-17 11:05:39 +01:00
81 lines
2.3 KiB
ReStructuredText
81 lines
2.3 KiB
ReStructuredText
Tuya Cover
|
|
==========
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a Tuya cover motor.
|
|
|
|
The ``tuya`` cover platform creates a simple position-only cover from a
|
|
tuya serial component.
|
|
|
|
There are two components, the Tuya bus and the cover that uses it. The :doc:`/components/tuya`
|
|
component requires a :ref:`UART bus <uart>` to be configured. Put the ``tuya`` component in
|
|
the config and it will list the possible devices for you in the config log.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
# Make sure your WiFi will connect
|
|
wifi:
|
|
ssid: "ssid"
|
|
password: "password"
|
|
|
|
# Make sure logging is not using the serial port
|
|
logger:
|
|
baud_rate: 0
|
|
|
|
# Enable Home Assistant API
|
|
api:
|
|
|
|
# Make sure you can upload new firmware OTA
|
|
ota:
|
|
|
|
# My dimmer used the hardware serial port on the alternate pins
|
|
uart:
|
|
rx_pin: GPIO13
|
|
tx_pin: GPIO15
|
|
baud_rate: 9600
|
|
|
|
# Register the Tuya MCU connection
|
|
tuya:
|
|
|
|
Here is an example output for a Tuya dimmer:
|
|
|
|
.. code-block:: text
|
|
|
|
[21:50:28][C][tuya:024]: Tuya:
|
|
[21:50:28][C][tuya:031]: Datapoint 2: int value (value: 53)
|
|
[21:50:28][C][tuya:029]: Datapoint 5: switch (value: OFF)
|
|
|
|
On this cover motor, the position control is datapoint 2.
|
|
Now you can create the cover.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Create a cover using the dimmer
|
|
cover:
|
|
- platform: "tuya"
|
|
name: "motor1"
|
|
position_datapoint: 2
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **name** (**Required**, string): The name of the cover.
|
|
- **position_datapoint** (**Required**, int): The datapoint id number of the cover position value.
|
|
- **min_value** (*Optional*, int, default 0): The lowest position value, meaning cover closed.
|
|
- **max_value** (*optional*, int, default 255): the highest position value, meaning cover opened.
|
|
- **invert_position** (*optional*, boolean): invert the meaning of ``min_value`` and ``max_value``.
|
|
When set to ``true``, ``min_value`` will mean opened and ``max_value`` is closed.
|
|
- All other options from :ref:`Cover <config-cover>`.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/tuya`
|
|
- :doc:`/components/cover/index`
|
|
- :apiref:`tuya/cover/tuya_cover.h`
|
|
- :ghedit:`Edit`
|
|
|