214 lines
7.4 KiB
ReStructuredText
214 lines
7.4 KiB
ReStructuredText
RPI_DPI_RGB Display Driver
|
|
===========================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up 16 bit "RPI_DPI_RGB" parallel displays
|
|
:image: waveshare_touch-s3.jpg
|
|
|
|
.. _rpi_dpi_rgb:
|
|
|
|
Models
|
|
------
|
|
This display driver supports displays with 16 bit parallel interfaces, often referred to as "RPI_DPI_RGB" type.
|
|
These have a parallel interface but no SPI interface and require no configuration of the driver chip.
|
|
|
|
This driver has been tested with the following displays:
|
|
|
|
- Waveshare ESP32-S3-Touch-LCD-4.3
|
|
- Makerfabs 4.3" display (Sunton)
|
|
|
|
Usage
|
|
-----
|
|
This component requires an ESP32 (usually an ESP32-S3 because of the number of GPIO pins required) and the use of
|
|
ESP-IDF. PSRAM is a requirement due to the size of the display buffer.
|
|
|
|
.. figure:: images/waveshare_touch-s3.jpg
|
|
:align: center
|
|
:width: 75.0%
|
|
|
|
Waveshare ESP32-S3 Touch 4.3
|
|
|
|
|
|
.. code-block:: yaml
|
|
|
|
|
|
# Example minimal configuration entry
|
|
display:
|
|
- platform: rpi_dpi_rgb
|
|
id: rpi_disp
|
|
dimensions:
|
|
width: 800
|
|
height: 480
|
|
de_pin: REPLACE_ME
|
|
hsync_pin: REPLACE_ME
|
|
vsync_pin: REPLACE_ME
|
|
pclk_pin: REPLACE_ME
|
|
|
|
data_pins:
|
|
red:
|
|
- XX #r1
|
|
- XX #r2
|
|
- XX #r3
|
|
- XX #r4
|
|
- XX #r5
|
|
green:
|
|
- XX #g0
|
|
- XX #g1
|
|
- XX #g2
|
|
- XX #g3
|
|
- XX #g4
|
|
- XX #g5
|
|
blue:
|
|
- XX #b1
|
|
- XX #b2
|
|
- XX #b3
|
|
- XX #b4
|
|
- XX #b5
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **data_pins** (**Required**) A list of pins used for the databus. Specified in 3 groups:
|
|
|
|
- **red**: (**Required**, :ref:`Pin Schema <config-pin_schema>`) Exactly 5 pin numbers for the red databits, listed from least to most significant bit.
|
|
- **green**: (**Required**, :ref:`Pin Schema <config-pin_schema>`) Exactly 6 pin numbers for the green databits, listed from least to most significant bit.
|
|
- **blue**: (**Required**, :ref:`Pin Schema <config-pin_schema>`) Exactly 5 pin numbers for the blue databits, listed from least to most significant bit.
|
|
- **de_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The DE pin
|
|
- **pclk_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The PCLK pin.
|
|
- **hsync_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The Horizontal sync pin.
|
|
- **vsync_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The Vertical sync pin.
|
|
- **reset_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The RESET pin.
|
|
- **hsync_pulse_width** (*Optional*, int): The horizontal sync pulse width.
|
|
- **hsync_front_porch** (*Optional*, int): The horizontal front porch length.
|
|
- **hsync_back_porch** (*Optional*, int): The horizontal back porch length.
|
|
- **vsync_pulse_width** (*Optional*, int): The vertical sync pulse width.
|
|
- **vsync_front_porch** (*Optional*, int): The vertical front porch length.
|
|
- **vsync_back_porch** (*Optional*, int): The vertical back porch length.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to re-draw the screen. Defaults to ``5s``.
|
|
- **auto_clear_enabled** (*Optional*, boolean): Whether to automatically clear the display in each loop (''true'', default),
|
|
or to keep the existing display content (must overwrite explicitly, e.g., only on data change).
|
|
- **pages** (*Optional*, list): Show pages instead of a single lambda. See :ref:`display-pages`.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **color_order** (*Optional*): Should be one of ``bgr`` (default) or ``rgb``.
|
|
- **dimensions** (**Required**): Dimensions of the screen, specified either as *width* **x** *height* (e.g ``320x240``) or with separate config keys.
|
|
- **height** (**Required**, int): Specifies height of display in pixels.
|
|
- **width** (**Required**, int): Specifies width of display.
|
|
- **offset_width** (*Optional*, int): Specify an offset for the x-direction of the display, typically used when an LCD is smaller than the maximum supported by the driver chip. Default is 0
|
|
- **offset_height** (*Optional*, int): Specify an offset for the y-direction of the display. Default is 0.
|
|
|
|
- **pclk_frequency** (*Optional*): Set the pixel clock speed. Default is 16MHz.
|
|
- **pclk_inverted** (*Optional* bool): If the pclk is active negative (default is True)
|
|
- **invert_colors** (*Optional*): With this boolean option you can invert the display colors. **Note** some of the displays have this option set automatically to true and can't be changed.
|
|
- **rotation** (*Optional*): Rotate the display presentation in software. Choose one of ``0°``, ``90°``, ``180°``, or ``270°``.
|
|
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
|
|
See :ref:`display-engine` for more information.
|
|
|
|
|
|
The horizontal and vertical ``pulse_width``, ``front_porch`` and ``back_porch`` values are optional, but may require
|
|
changing for a specific display. Refer to the manufacturer's sample code for suitable values. These specify timing
|
|
requirements for the display.
|
|
|
|
Example configurations
|
|
----------------------
|
|
|
|
|
|
Waveshare ESP32-S3 Touch 4.3
|
|
****************************
|
|
|
|
.. code-block:: yaml
|
|
|
|
display:
|
|
- platform: rpi_dpi_rgb
|
|
auto_clear_enabled: false
|
|
color_order: RGB
|
|
pclk_frequency: 16MHz
|
|
dimensions:
|
|
width: 800
|
|
height: 480
|
|
de_pin:
|
|
number: 5
|
|
hsync_pin:
|
|
number: 46
|
|
ignore_strapping_warning: true
|
|
vsync_pin:
|
|
number: 3
|
|
ignore_strapping_warning: true
|
|
pclk_pin: 7
|
|
hsync_back_porch: 30
|
|
hsync_front_porch: 210
|
|
hsync_pulse_width: 30
|
|
vsync_back_porch: 4
|
|
vsync_front_porch: 4
|
|
vsync_pulse_width: 4
|
|
data_pins:
|
|
red:
|
|
- 1 #r3
|
|
- 2 #r4
|
|
- 42 #r5
|
|
- 41 #r6
|
|
- 40 #r7
|
|
blue:
|
|
- 14 #b3
|
|
- 38 #b4
|
|
- 18 #b5
|
|
- 17 #b6
|
|
- 10 #b7
|
|
green:
|
|
- 39 #g2
|
|
- 0 #g3
|
|
- 45 #g4
|
|
- 48 #g5
|
|
- 47 #g6
|
|
- 21 #g7
|
|
|
|
|
|
Makerfabs 4.3" 800x480 display
|
|
******************************
|
|
|
|
.. code-block:: yaml
|
|
|
|
display:
|
|
- platform: rpi_dpi_rgb
|
|
update_interval: never
|
|
auto_clear_enabled: false
|
|
id: rpi_display
|
|
color_order: RGB
|
|
rotation: 90
|
|
dimensions:
|
|
width: 800
|
|
height: 480
|
|
de_pin:
|
|
number: 40
|
|
hsync_pin: 39
|
|
vsync_pin: 41
|
|
pclk_pin: 42
|
|
data_pins:
|
|
red:
|
|
- 45 #r1
|
|
- 48 #r2
|
|
- 47 #r3
|
|
- 21 #r4
|
|
- 14 #r5
|
|
green:
|
|
- 5 #g0
|
|
- 6 #g1
|
|
- 7 #g2
|
|
- 15 #g3
|
|
- 16 #g4
|
|
- 4 #g5
|
|
blue:
|
|
- 8 #b1
|
|
- 3 #b2
|
|
- 46 #b3
|
|
- 9 #b4
|
|
- 1 #b5
|
|
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :apiref:`rpi_dpi_rgb/rpi_dpi_rgb.h`
|
|
- :ghedit:`Edit`
|