mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-30 18:09:26 +01:00
104 lines
3.6 KiB
ReStructuredText
104 lines
3.6 KiB
ReStructuredText
Custom I²C Device
|
|
=================
|
|
|
|
.. warning::
|
|
|
|
Custom components are deprecated, not recommended for new configurations
|
|
and will be removed from ESPHome in a future release.
|
|
Please look at creating a real ESPHome component and "importing" it into your
|
|
configuration with :doc:`/components/external_components`.
|
|
|
|
You can find some basic documentation on creating your own components
|
|
at :ref:`contributing_to_esphome`.
|
|
|
|
Lots of devices communicate using the I²C protocol. If you want to integrate
|
|
a device into ESPHome that uses this protocol you can pretty much use almost
|
|
all Arduino-based code because the ``Wire`` library is also available in ESPHome.
|
|
|
|
See the other custom component guides for how to register components and make
|
|
them publish values.
|
|
|
|
.. code-block:: cpp
|
|
|
|
#include "esphome.h"
|
|
|
|
class MyCustomComponent : public Component {
|
|
public:
|
|
void setup() override {
|
|
// Initialize the device here. Usually Wire.begin() will be called in here,
|
|
// though that call is unnecessary if you have an 'i2c:' entry in your config
|
|
|
|
Wire.begin();
|
|
}
|
|
void loop() override {
|
|
// Example: write the value 0x42 to register 0x78 of device with address 0x21
|
|
Wire.beginTransmission(0x21);
|
|
Wire.write(0x78);
|
|
Wire.write(0x42);
|
|
Wire.endTransmission();
|
|
}
|
|
};
|
|
|
|
|
|
I²C Write
|
|
---------
|
|
It may be useful to write to a register via I²C using a numerical input. For example, the following yaml code snippet captures a user-supplied numerical input in the range 1--255 from the dashboard:
|
|
|
|
.. code-block:: yaml
|
|
|
|
number:
|
|
- platform: template
|
|
name: "Input 1"
|
|
optimistic: true
|
|
min_value: 1
|
|
max_value: 255
|
|
initial_value: 20
|
|
step: 1
|
|
mode: box
|
|
id: input_1
|
|
icon: "mdi:counter"
|
|
|
|
We want to write this number to a ``REGISTER_ADDRESS`` on the slave device via I²C. The Arduino-based looping code shown above is modified following the guidance in :doc:`Custom Sensor Component </components/sensor/custom>`.
|
|
|
|
.. code-block:: cpp
|
|
|
|
#include "esphome.h"
|
|
|
|
const uint16_t I2C_ADDRESS = 0x21;
|
|
const uint16_t REGISTER_ADDRESS = 0x78;
|
|
const uint16_t POLLING_PERIOD = 15000; //milliseconds
|
|
char temp = 20; //Initial value of the register
|
|
|
|
class MyCustomComponent : public PollingComponent {
|
|
public:
|
|
MyCustomComponent() : PollingComponent(POLLING_PERIOD) {}
|
|
float get_setup_priority() const override { return esphome::setup_priority::BUS; } //Access I2C bus
|
|
|
|
void setup() override {
|
|
//Add code here as needed
|
|
Wire.begin();
|
|
}
|
|
|
|
void update() override {
|
|
char register_value = id(input_1).state; //Read the number set on the dashboard
|
|
//Did the user change the input?
|
|
if(register_value != temp){
|
|
Wire.beginTransmission(I2C_ADDRESS);
|
|
Wire.write(REGISTER_ADDRESS);
|
|
Wire.write(register_value);
|
|
Wire.endTransmission();
|
|
temp = register_value; //Swap in the new value
|
|
}
|
|
}
|
|
};
|
|
|
|
The ``Component`` class has been replaced with ``PollingComponent`` and the free-running ``loop()`` is changed to the ``update()`` method with period set by ``POLLING_PERIOD``. The numerical value from the dashboard is accessed with its ``id`` tag and its state is set to the byte variable that we call ``register_value``. To prevent an I²C write on every iteration, the contents of the register are stored in ``temp`` and checked for a change. Configuring the hardware with ``get_setup_priority()`` is explained in :doc:`Step 1 </components/sensor/custom>`.
|
|
|
|
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ghedit:`Edit`
|