mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-09-06 00:58:07 +02:00
462 lines
13 KiB
ReStructuredText
462 lines
13 KiB
ReStructuredText
Configuration Types
|
||
===================
|
||
|
||
.. seo::
|
||
:description: Documentation of different configuration types in ESPHome
|
||
:image: settings.svg
|
||
|
||
ESPHome’s configuration files have several configuration types. This
|
||
page describes them.
|
||
|
||
.. _config-id:
|
||
|
||
ID
|
||
--
|
||
|
||
Quite an important aspect of ESPHome are “IDs”. They are used to
|
||
connect components from different domains. For example, you define an
|
||
output component together with an ID and then later specify that same ID
|
||
in the light component. IDs should always be unique within a
|
||
configuration and ESPHome will warn you if you try to use the same
|
||
ID twice.
|
||
|
||
Because ESPHome converts your configuration into C++ code and the
|
||
IDs are in reality just C++ variable names, they must also adhere to
|
||
C++’s naming conventions. `C++ Variable
|
||
names <https://venus.cs.qc.cuny.edu/~krishna/cs111/lectures/D3_C++_Variables.pdf>`__
|
||
…
|
||
|
||
- … must start with a letter and can end with numbers.
|
||
- … must not have a space in the name.
|
||
- … can not have special characters except the underscore (“_“).
|
||
- … must not be a keyword.
|
||
|
||
|
||
.. note::
|
||
|
||
These IDs are used only within ESPHome and are not translated to Home Assistant's Entity ID.
|
||
|
||
|
||
.. _config-pin:
|
||
|
||
Pin
|
||
---
|
||
|
||
ESPHome always uses the **chip-internal GPIO numbers**. These
|
||
internal numbers are always integers like ``16`` and can be prefixed by
|
||
``GPIO``. For example to use the pin with the **internal** GPIO number 16,
|
||
you could type ``GPIO16`` or just ``16``.
|
||
|
||
Most boards however have aliases for certain pins. For example the NodeMCU
|
||
ESP8266 uses pin names ``D0`` through ``D8`` as aliases for the internal GPIO
|
||
pin numbers. Each board (defined in :doc:`ESPHome section </components/esphome>`)
|
||
has their own aliases and so not all of them are supported yet. For example,
|
||
for the ``D0`` (as printed on the PCB silkscreen) pin on the NodeMCU ESP8266
|
||
has the internal GPIO name ``GPIO16``, but also has an alias ``D0``. So using
|
||
either one of these names in your configuration will lead to the same result.
|
||
|
||
.. code-block:: yaml
|
||
|
||
some_config_option:
|
||
pin: GPIO16
|
||
|
||
some_config_option:
|
||
# alias on the NodeMCU ESP8266:
|
||
pin: D0
|
||
|
||
.. _config-pin_schema:
|
||
|
||
Pin Schema
|
||
----------
|
||
|
||
In some places, ESPHome also supports a more advanced “pin schema”.
|
||
|
||
.. code-block:: yaml
|
||
|
||
some_config_option:
|
||
# Basic:
|
||
pin: D0
|
||
|
||
# Advanced:
|
||
pin:
|
||
number: D0
|
||
inverted: true
|
||
mode:
|
||
input: true
|
||
pullup: true
|
||
|
||
Configuration variables:
|
||
|
||
- **number** (**Required**, pin): The pin number.
|
||
- **inverted** (*Optional*, boolean): If all read and written values
|
||
should be treated as inverted. Defaults to ``false``.
|
||
- **mode** (*Optional*, string or mapping): Configures the pin to behave in different
|
||
modes like input or output. The default value depends on the context.
|
||
Accepts either a shorthand string or a mapping where each feature can be individually
|
||
enabled/disabled:
|
||
|
||
- **input** (*Optional*, boolean): If true, configure the pin as an input.
|
||
- **output** (*Optional*, boolean): If true, configure the pin as an output.
|
||
- **pullup** (*Optional*, boolean): Activate internal pullup resistors on the pin.
|
||
- **pulldown** (*Optional*, boolean): Activate internal pulldown resistors on the pin.
|
||
- **open_drain** (*Optional*, boolean): Set the pin to open-drain (as opposed to push-pull).
|
||
The active pin state will then result in a high-impedance state.
|
||
|
||
For compatibility some shorthand modes can also be used.
|
||
|
||
- ``INPUT``
|
||
- ``OUTPUT``
|
||
- ``OUTPUT_OPEN_DRAIN``
|
||
- ``ANALOG``
|
||
- ``INPUT_PULLUP``
|
||
- ``INPUT_PULLDOWN``
|
||
- ``INPUT_OUTPUT_OPEN_DRAIN``
|
||
|
||
Advanced options:
|
||
|
||
- **drive_strength** (*Optional*, string): On ESP32s with esp-idf framework the pad drive strength,
|
||
i.e. the maximum amount of current can additionally be set. Defaults to ``20mA``.
|
||
Options are ``5mA``, ``10mA``, ``20mA``, ``40mA``.
|
||
|
||
.. _config-time:
|
||
|
||
Time
|
||
----
|
||
|
||
In lots of places in ESPHome you need to define time periods.
|
||
There are several ways of doing this. See below examples to see how you can specify time periods:
|
||
|
||
.. code-block:: yaml
|
||
|
||
some_config_option:
|
||
some_time_option: 1000us # 1000 microseconds = 1ms
|
||
some_time_option: 1000ms # 1000 milliseconds
|
||
some_time_option: 1.5s # 1.5 seconds
|
||
some_time_option: 0.5min # half a minute
|
||
some_time_option: 2h # 2 hours
|
||
|
||
# Make sure you wrap these in quotes
|
||
some_time_option: '2:01' # 2 hours 1 minute
|
||
some_time_option: '2:01:30' # 2 hours 1 minute 30 seconds
|
||
|
||
# 10ms + 30s + 25min + 3h
|
||
some_time_option:
|
||
milliseconds: 10
|
||
seconds: 30
|
||
minutes: 25
|
||
hours: 3
|
||
days: 0
|
||
|
||
# for all 'update_interval' options, also
|
||
update_interval: never # never update
|
||
update_interval: 0ms # update in every loop() iteration
|
||
|
||
.. _config-substitutions:
|
||
|
||
Substitutions
|
||
-------------
|
||
|
||
Starting with version 1.10.0, ESPHome has a powerful new way to reduce repetition in configuration files:
|
||
Substitutions. With substitutions, you can have a single generic source file for all nodes of one kind and
|
||
substitute expressions in.
|
||
|
||
.. code-block:: yaml
|
||
|
||
substitutions:
|
||
devicename: livingroom
|
||
upper_devicename: Livingroom
|
||
|
||
esphome:
|
||
name: $devicename
|
||
# ...
|
||
|
||
sensor:
|
||
- platform: dht
|
||
# ...
|
||
temperature:
|
||
name: ${upper_devicename} Temperature
|
||
humidity:
|
||
name: ${upper_devicename} Humidity
|
||
|
||
In the top-level ``substitutions`` section, you can put as many key-value pairs as you want. Before
|
||
validating your configuration, ESPHome will automatically replace all occurrences of substitutions
|
||
by their value. The syntax for a substitution is based on bash and is case-sensitive: ``$substitution_key`` or
|
||
``${substitution_key}`` (same).
|
||
|
||
Two substitution passes are performed allowing compound replacements.
|
||
|
||
.. code-block:: yaml
|
||
|
||
substitutions:
|
||
foo: yellow
|
||
bar_yellow_value: !secret yellow_secret
|
||
bar_green_value: !secret green_secret
|
||
|
||
something:
|
||
test: ${bar_${foo}_value}
|
||
|
||
.. _YAML-insertion-operator:
|
||
|
||
YAML insertion operator
|
||
***********************
|
||
|
||
Additionally, you can use the YAML insertion operator ``<<`` syntax to create a single YAML file from which a number
|
||
of nodes inherit:
|
||
|
||
.. code-block:: yaml
|
||
|
||
# In common.yaml
|
||
esphome:
|
||
name: $devicename
|
||
# ...
|
||
|
||
sensor:
|
||
- platform: dht
|
||
# ...
|
||
temperature:
|
||
name: ${upper_devicename} Temperature
|
||
humidity:
|
||
name: ${upper_devicename} Humidity
|
||
|
||
.. code-block:: yaml
|
||
|
||
# In nodemcu1.yaml
|
||
substitutions:
|
||
devicename: nodemcu1
|
||
upper_devicename: NodeMCU 1
|
||
|
||
<<: !include common.yaml
|
||
|
||
.. tip::
|
||
|
||
To hide these base files from the dashboard, you can
|
||
|
||
- Place them in a subdirectory (dashboard only shows files in top-level directory)
|
||
- Prepend a dot to the filename, like ``.base.yaml``
|
||
|
||
.. _substitute-include-variables:
|
||
|
||
Substitute !include variables
|
||
*****************************
|
||
|
||
ESPHome's ``!include`` accepts a list of variables that can be substituted within the included file.
|
||
|
||
.. code-block:: yaml
|
||
|
||
binary_sensor:
|
||
- platform: gpio
|
||
id: button1
|
||
pin: GPIO16
|
||
on_multi_click: !include { file: on-multi-click.yaml, vars: { id: 1 } } # inline syntax
|
||
- platform: gpio
|
||
id: button2
|
||
pin: GPIO4
|
||
on_multi_click: !include
|
||
# multi-line syntax
|
||
file: on-multi-click.yaml
|
||
vars:
|
||
id: 2
|
||
|
||
``on-multi-click.yaml``:
|
||
|
||
.. code-block:: yaml
|
||
|
||
- timing: !include click-single.yaml
|
||
then:
|
||
- mqtt.publish:
|
||
topic: ${device_name}/button${id}/status
|
||
payload: single
|
||
- timing: !include click-double.yaml
|
||
then:
|
||
- mqtt.publish:
|
||
topic: ${device_name}/button${id}/status
|
||
payload: double
|
||
|
||
.. _command-line-substitutions:
|
||
|
||
Command line substitutions
|
||
**************************
|
||
|
||
You can define or override substitutions from the command line by adding e.g. ``-s KEY VALUE``
|
||
which overrides substitution KEY and gives it value VALUE. This can be issued multiple times,
|
||
so e.g. with the following ``example.yaml`` file:
|
||
|
||
.. code-block:: yaml
|
||
|
||
substitutions:
|
||
name: default
|
||
platform: ESP8266
|
||
|
||
esphome:
|
||
name: $name
|
||
platform: $platform
|
||
board: $board
|
||
|
||
and the following command:
|
||
|
||
.. code-block:: bash
|
||
|
||
esphome -s name device01 -s board esp01_1m example.yaml config
|
||
|
||
You will get something like the following output (please note the unchanged ``platform``,
|
||
added ``board``, and overridden ``name`` substitutions):
|
||
|
||
.. code-block:: yaml
|
||
|
||
substitutions:
|
||
name: device01
|
||
platform: ESP8266
|
||
board: esp01_1m
|
||
esphome:
|
||
name: device01
|
||
platform: ESP8266
|
||
board: esp01_1m
|
||
includes: []
|
||
libraries: []
|
||
esp8266_restore_from_flash: false
|
||
build_path: device01
|
||
platformio_options: {}
|
||
arduino_version: espressif8266@2.2.3
|
||
|
||
We can observe here that command line substitutions take precedence over the ones in
|
||
your configuration file. This can be used to create generic 'template' configuration
|
||
files (like the ``example.yaml`` above) which can be used for multiple devices,
|
||
using substitutions which are provided on the command line.
|
||
|
||
.. _config-packages:
|
||
|
||
Packages
|
||
--------
|
||
|
||
Another way to modularize and reuse your configuration is to use packages. This feature allows
|
||
you to put common pieces of configuration in separate files and keep only unique pieces of your
|
||
config in the main yaml file. All definitions from packages will be merged with your main
|
||
config in non-destructive way so you could always override some bits and pieces of package
|
||
configuration.
|
||
|
||
Dictionaries are merged key-by-key. Lists of components are merged by component
|
||
ID if specified. Other lists are merged by concatenation. All other config
|
||
values are replaced with the later value.
|
||
|
||
Local packages
|
||
**************
|
||
|
||
Consider the following example where the author put common pieces of configuration like WiFi and
|
||
I²C into base files and extends it with some device specific configurations in the main config.
|
||
|
||
Note how the piece of configuration describing ``api`` component in ``device_base.yaml`` gets
|
||
merged with the services definitions from main config file.
|
||
|
||
.. code-block:: yaml
|
||
|
||
# In config.yaml
|
||
substitutions:
|
||
node_name: mydevice
|
||
device_verbose_name: "My Device"
|
||
|
||
packages:
|
||
wifi: !include common/wifi.yaml
|
||
device_base: !include common/device_base.yaml
|
||
|
||
api:
|
||
services:
|
||
- service: start_laundry
|
||
then:
|
||
- switch.turn_on: relay
|
||
- delay: 3h
|
||
- switch.turn_off: relay
|
||
|
||
sensor:
|
||
- platform: mhz19
|
||
co2:
|
||
name: "CO2"
|
||
temperature:
|
||
name: "Temperature"
|
||
update_interval: 60s
|
||
automatic_baseline_calibration: false
|
||
|
||
.. code-block:: yaml
|
||
|
||
# In wifi.yaml
|
||
wifi:
|
||
ssid: !secret wifi_ssid
|
||
password: !secret wifi_password
|
||
domain: .yourdomain.lan
|
||
fast_connect: true
|
||
|
||
.. code-block:: yaml
|
||
|
||
# In device_base.yaml
|
||
esphome:
|
||
name: ${node_name}
|
||
platform: ESP32
|
||
board: wemos_d1_mini32
|
||
build_path: ./build/${node_name}
|
||
|
||
# I²C Bus
|
||
i2c:
|
||
sda: GPIO21
|
||
scl: GPIO22
|
||
scan: true
|
||
frequency: 100kHz
|
||
|
||
# Enable logging
|
||
logger:
|
||
level: ${log_level}
|
||
|
||
api:
|
||
encryption:
|
||
key: !secret api_encryption_key
|
||
reboot_timeout: 1h
|
||
|
||
sensor:
|
||
- <<: !include common/sensor/uptime.config.yaml
|
||
- <<: !include common/sensor/wifi_signal.config.yaml
|
||
binary_sensor:
|
||
- <<: !include common/binary_sensor/connection_status.config.yaml
|
||
|
||
switch:
|
||
- <<: !include common/switch/restart_switch.config.yaml
|
||
|
||
.. _config-git_packages:
|
||
|
||
Remote/git Packages
|
||
*******************
|
||
|
||
Packages can also be loaded from a git repository by utilizing the correct config syntax.
|
||
:ref:`config-substitutions` can be used inside the remote packages which allows users to override
|
||
them locally with their own subsitution value.
|
||
|
||
.. note::
|
||
|
||
Remote packages cannot have ``secret`` lookups in them. They should instead make use of substitutions with an
|
||
optional default in the packaged YAML, which the local device YAML can set using values from the local secrets.
|
||
|
||
.. code-block:: yaml
|
||
|
||
packages:
|
||
# Git repo examples
|
||
remote_package:
|
||
url: https://github.com/esphome/non-existant-repo
|
||
ref: main # optional
|
||
files: [file1.yml, file2.yml]
|
||
refresh: 1d # optional
|
||
|
||
# A single file can be expressed using `file` or `files` as a string
|
||
remote_package_two:
|
||
url: https://github.com/esphome/non-existant-repo
|
||
file: file1.yml # cannot be combined with `files`
|
||
# files: file1.yml
|
||
|
||
# shorthand form github://username/repository/[folder/]file-path.yml[@branch-or-tag]
|
||
remote_package_three: github://esphome/non-existant-repo/file1.yml@main
|
||
|
||
|
||
See Also
|
||
--------
|
||
|
||
- :doc:`ESPHome index </index>`
|
||
- :doc:`getting_started_command_line`
|
||
- :doc:`faq`
|
||
- :ghedit:`Edit`
|