mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-28 17:48:35 +01:00
64 lines
2.7 KiB
ReStructuredText
64 lines
2.7 KiB
ReStructuredText
Remote Receiver Component
|
|
=========================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up remote receivers in esphomelib.
|
|
:image: remote.svg
|
|
:keywords: RF, infrared
|
|
|
|
The ``remote_receiver`` component lets you receive and decode any remote signal, these can
|
|
for example be infrared remotes or 433MHz signals.
|
|
|
|
The component is split up into two parts: the remote receiver hub which can be used to
|
|
receive, decode and dump all remote codes, and individual
|
|
:doc:`remote receiver binary sensors <binary_sensor/remote_receiver>` which will trigger when they
|
|
hear their own configured signal.
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_receiver:
|
|
pin: GPIO32
|
|
dump: all
|
|
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **pin** (**Required**, :ref:`config-pin`): The pin to receive the remote signal on.
|
|
- **dump** (*Optional*, list): Decode and dump these remote codes in the logs. Set to ``all`` to
|
|
dump all available codecs:
|
|
|
|
- **lg**: Decode and dump LG infrared codes.
|
|
- **nec**: Decode and dump NEC infrared codes.
|
|
- **panasonic**: Decode and dump Panasonic infrared codes.
|
|
- **samsung**: Decode and dump Samsung infrared codes.
|
|
- **sony**: Decode and dump Sony infrared codes.
|
|
- **rc_switch**: Decode and dump RCSwitch RF codes.
|
|
- **raw**: Print all remote codes in their raw form. Useful for using arbitrary protocols.
|
|
|
|
- **tolerance** (*Optional*, int): The percentage that the remote signal lengths can deviate in the
|
|
decoding process. Defaults to ``25%``.
|
|
- **buffer_size** (*Optional*, int): The size of the internal buffer for storing the remote codes. Defaults to ``10kb``
|
|
on the ESP32 and ``1kb`` on the ESP8266.
|
|
- **filter** (*Optional*, :ref:`time <config-time>`): Filter any pulses that are shorter than this. Useful for removing
|
|
glitches from noisy signals. Defaults to ``10us``.
|
|
- **idle** (*Optional*, :ref:`time <config-time>`): The amount of time that a signal should remain stable (i.e. not
|
|
change) for it to be considered complete. Defaults to ``10ms``.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. Use this if you have
|
|
multiple remote transmitters.
|
|
|
|
.. note::
|
|
|
|
See :ref:`finding_remote_codes` for a guide for setting this up.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- `RCSwitch <https://github.com/sui77/rc-switch>`__ by `Suat Özgür <https://github.com/sui77>`__
|
|
- `IRRemoteESP8266 <https://github.com/markszabo/IRremoteESP8266/>`__ by `Mark Szabo-Simon <https://github.com/markszabo>`__
|
|
- :doc:`API Reference </api/switch/remote_transmitter>`
|
|
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/remote_transmitter.rst>`__
|
|
|
|
.. disqus::
|