esphome-docs/components/ota.rst
2021-01-12 05:46:37 +13:00

68 lines
2.2 KiB
ReStructuredText

OTA Update Component
====================
.. seo::
:description: Instructions for setting up Over-The-Air (OTA) updates for ESPs to upload firmwares remotely.
:image: system-update.png
:keywords: Xiaomi, Mi Flora, BLE, Bluetooth
With the OTA (Over The Air) update component you can upload your
firmware binaries to your node without having to use a USB cable for
uploads. ESPHome natively supports this through its ``run`` and
``upload`` helper scripts.
ESPHome also has an "OTA safe mode". If for some reason your
node gets into a boot loop, ESPHome will automatically try to detect
this and will go over into a safe mode after 10 unsuccessful boot
attempts. In that mode, all components are disabled and only Serial
Logging+WiFi+OTA are initialized, so that you can upload a new binary.
.. code-block:: yaml
# Example configuration entry
ota:
safe_mode: True
password: VERYSECURE
Configuration variables:
------------------------
- **safe_mode** (*Optional*, boolean): Whether to enable safe mode.
Defaults to ``True``.
- **password** (*Optional*, string): The password to use for updates.
- **port** (*Optional*, int): The port to use for OTA updates. Defaults
to ``3232`` for the ESP32 and ``8266`` for the ESP8266.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
.. note::
Please be aware that ESP8266 modules must be reset after a serial
upload before OTA can work.
When you are trying to conduct an OTA update and receive an error message
``Bad Answer: ERR: ERROR[11]: Invalid bootstrapping`` the reason is
very likely that power-cycling the ESP module is required once after
the serial upload.
Updating the password:
----------------------
Since the password is used both for compiling and uploading the regular ``esphome <file> run``
won't work of course. This issue can be worked around by executing the operations separately
through an ``on_boot`` trigger:
.. code-block:: yaml
esphome:
on_boot:
- lambda: |-
id(my_ota).set_auth_password("New password");
ota:
password: "Old password"
id: my_ota
See Also
--------
- :apiref:`ota/ota_component.h`
- :ghedit:`Edit`