136 lines
4.1 KiB
ReStructuredText
136 lines
4.1 KiB
ReStructuredText
Template Alarm Control Panel
|
|
============================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up template Alarm Control Panels in ESPHome.
|
|
:image: description.svg
|
|
|
|
The ``template`` alarm control panel platform allows you to turn your binary sensors into a state machine
|
|
managed alarm control panel.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
alarm_control_panel:
|
|
- platform: template
|
|
name: Alarm Panel
|
|
codes:
|
|
- "1234"
|
|
binary_sensors:
|
|
- input: zone_1
|
|
- input: zone_2
|
|
bypass_armed_home: true
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **codes** (*Optional*, list of string): A list of codes for disarming the alarm, if *requires_code_to_arm* set to true then for arming the alarm too.
|
|
- **requires_code_to_arm** (*Optional*, boolean): Code required for arming the alarm, *code* must be provided.
|
|
- **arming_time** (*Optional*, :ref:`config-time`): The exit delay before the alarm is armed.
|
|
- **pending_time** (*Optional*, :ref:`config-time`): The entry delay before the alarm is triggered.
|
|
- **trigger_time** (*Optional*, :ref:`config-time`): The time after a triggered alarm before resetting to previous state if the sensors are cleared/off.
|
|
- **binary_sensors** (*Optional*, *list*): A list of binary sensors the panel should use. Each consists of:
|
|
|
|
- **input** (**Required**, string): The id of the binary sensor component
|
|
- **bypass_armed_home** (*Optional*, boolean): This binary sensor will not trigger the alarm when in ``armed_home`` state.
|
|
|
|
- **restore_mode** (*Optional*, enum):
|
|
|
|
- **ALWAYS_DISARMED** (Default): Always start in ``disarmed`` state.
|
|
- **RESTORE_DEFAULT_DISARMED**: Restore state or default to ``disarmed`` state if no saved state was found.
|
|
|
|
- All other options from :ref:`Alarm Control Panel <config-alarm_control_panel>`
|
|
|
|
.. note::
|
|
|
|
If ``binary_sensors`` is ommited then you're expected to trigger the alarm using
|
|
:ref:`alarm_control_panel_pending_action` or :ref:`alarm_control_panel_triggered_action`.
|
|
|
|
|
|
.. _template_alarm_control_panel-state_flow:
|
|
|
|
State Flow:
|
|
-----------
|
|
|
|
1. The alarm starts in ``DISARMED`` state
|
|
2. When the ``arm_...`` method is invoked
|
|
|
|
a. ``arming_time`` greater than 0 the state is ``ARMING``
|
|
b. ``arming_time`` is 0 or after the ``arming_time`` delay the state is ``ARM_AWAY`` or ``ARM_HOME``
|
|
|
|
3. When the alarm is tripped by a sensor state changing to ``on``
|
|
|
|
a. ``pending_time`` greater than 0 the state is ``PENDING``
|
|
b. ``pending_time`` is 0 or after the ``pending_time`` delay the state is ``TRIGGERED``
|
|
|
|
4. If ``trigger_time`` greater than 0 and no sensors are ``on`` after ``trigger_time`` delay
|
|
the state returns to ``ARM_AWAY`` or ``ARM_HOME``
|
|
|
|
Example:
|
|
--------
|
|
|
|
.. code-block:: yaml
|
|
|
|
alarm_control_panel:
|
|
platform: template
|
|
name: Alarm Panel
|
|
codes:
|
|
- "1234"
|
|
requires_code_to_arm: true
|
|
arming_time: 10s
|
|
pending_time: 15s
|
|
trigger_time: 5min
|
|
binary_sensors:
|
|
- input: zone_1
|
|
- input: zone_2
|
|
bypass_armed_home: true
|
|
- input: ha_test
|
|
on_state:
|
|
then:
|
|
- lambda: !lambda |-
|
|
ESP_LOGD("TEST", "State change %s", alarm_control_panel_state_to_string(id(acp1)->get_state()));
|
|
on_triggered:
|
|
then:
|
|
- switch.turn_on: siren
|
|
on_cleared:
|
|
then:
|
|
- switch.turn_off: siren
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
id: zone_1
|
|
name: Zone 1
|
|
device_class: door
|
|
pin:
|
|
number: D1
|
|
mode: INPUT_PULLUP
|
|
inverted: True
|
|
- platform: gpio
|
|
id: zone_2
|
|
name: Zone 2
|
|
device_class: motion
|
|
pin:
|
|
number: D2
|
|
mode: INPUT_PULLUP
|
|
inverted: True
|
|
- platform: homeassistant
|
|
id: ha_test
|
|
name: Zone 3
|
|
entity_id: input_boolean.test_switch
|
|
|
|
switch:
|
|
- platform: gpio
|
|
id: siren
|
|
name: Siren
|
|
icon: mdi:alarm-bell
|
|
pin: D7
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :doc:`/components/binary_sensor/index`
|
|
- :apiref:`template/alarm_control_panel/template_alarm_control_panel.h`
|
|
- :ghedit:`Edit`
|