mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-18 11:15:36 +01:00
96 lines
3.2 KiB
ReStructuredText
96 lines
3.2 KiB
ReStructuredText
GPS Component
|
|
=============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up GPS integration in ESPHome.
|
|
:image: crosshairs-gps.svg
|
|
|
|
The ``gps`` component allows you to connect GPS modules to your ESPHome project.
|
|
Any GPS module that uses the standardized NMEA communication protocol will work.
|
|
|
|
.. figure:: images/gps-full.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
GPS Module. Image by `Adafruit`_
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/746
|
|
|
|
For this integration to work you need to have set up a :ref:`UART bus <uart>`
|
|
in your configuration - only the RX pin should be necessary.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
uart:
|
|
rx_pin: D7
|
|
baud_rate: 9600
|
|
|
|
# Declare GPS module
|
|
gps:
|
|
latitude:
|
|
name: "Latitude"
|
|
longitude:
|
|
name: "Longitude"
|
|
altitude:
|
|
name: "Altitude"
|
|
|
|
# GPS as time source
|
|
time:
|
|
- platform: gps
|
|
|
|
The component is split up in platforms, by defining the GPS module
|
|
(as seen above).
|
|
|
|
In addition to retrieving GPS position data, the module can also be used as a
|
|
time platform to get the current date and time via the very accurate GPS clocks
|
|
without a network connection.
|
|
|
|
See :doc:`time` for config options for the GPS time source.
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
- **latitude** (*Optional*): Include the Latitude as a sensor
|
|
|
|
- **name** (**Required**, string): The name to give the latitude sensor
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **longitude** (*Optional*): Include the Longitude as a sensor
|
|
|
|
- **name** (**Required**, string): The name to give the latitude sensor
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **speed** (*Optional*): Include the measured speed as a sensor
|
|
|
|
- **name** (**Required**, string): The name to give the latitude sensor
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **course** (*Optional*): Include the measured course as a sensor
|
|
|
|
- **name** (**Required**, string): The name to give the latitude sensor
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **altitude** (*Optional*): Include the measured altitude as a sensor
|
|
|
|
- **name** (**Required**, string): The name to give the latitude sensor
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **satellites** (*Optional*): Include the number of tracking satellites being used as a sensor
|
|
|
|
- **name** (**Required**, string): The name to give the latitude sensor
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- `TinyGPS++ library <http://arduiniana.org/libraries/tinygpsplus/>`__
|
|
- :apiref:`gps/gps.h`
|
|
- :ghedit:`Edit`
|