200 lines
7.7 KiB
ReStructuredText
200 lines
7.7 KiB
ReStructuredText
WiFi Component
|
||
==============
|
||
|
||
.. seo::
|
||
:description: Instructions for setting up the WiFi configuration for your ESP node in ESPHome.
|
||
:image: network-wifi.png
|
||
:keywords: WiFi, WLAN, ESP8266, ESP32
|
||
|
||
This core ESPHome component sets up WiFi connections to access points
|
||
for you. It needs to be in your configuration or otherwise ESPHome
|
||
will fail in the config validation stage.
|
||
|
||
It’s recommended to provide a static IP for your node, as it can
|
||
dramatically improve connection times.
|
||
|
||
.. code-block:: yaml
|
||
|
||
# Example configuration entry
|
||
wifi:
|
||
ssid: MyHomeNetwork
|
||
password: VerySafePassword
|
||
|
||
# Optional manual IP
|
||
manual_ip:
|
||
static_ip: 10.0.0.42
|
||
gateway: 10.0.0.1
|
||
subnet: 255.255.255.0
|
||
|
||
Configuration variables:
|
||
------------------------
|
||
|
||
- **ssid** (*Optional*, string): The name (or `service set
|
||
identifier <https://www.lifewire.com/definition-of-service-set-identifier-816547>`__)
|
||
of the WiFi access point your device should connect to.
|
||
- **password** (*Optional*, string): The password (or PSK) for your
|
||
WiFi network. Leave empty for no password.
|
||
- **networks** (*Optional*): Configure multiple WiFi networks to connect to, the best one
|
||
that is reachable will be connected to. See :ref:`wifi-networks`.
|
||
- **manual_ip** (*Optional*): Manually configure the static IP of the node.
|
||
|
||
- **static_ip** (*Required*, IPv4 address): The static IP of your node.
|
||
- **gateway** (*Required*, IPv4 address): The gateway of the local network.
|
||
- **subnet** (*Required*, IPv4 address): The subnet of the local network.
|
||
- **dns1** (*Optional*, IPv4 address): The main DNS server to use.
|
||
- **dns2** (*Optional*, IPv4 address): The backup DNS server to use.
|
||
|
||
- **use_address** (*Optional*, string): Manually override what address to use to connect
|
||
to the ESP. Defaults to auto-generated value. Example, if you have changed your static IP and want to flash OTA to the previusly configured IP address.
|
||
|
||
- **ap** (*Optional*): Enable an access point mode on the node.
|
||
|
||
- **ssid** (*Required*, string): The name of the access point to create.
|
||
- **password** (*Optional* string): The password for the access point. Leave empty for
|
||
no password.
|
||
- **channel** (*Optional*, int): The channel the AP should operate on from 1 to 14.
|
||
Defaults to 1.
|
||
- **manual_ip** (*Optional*): Manually set the IP options for the AP. Same options as
|
||
manual_ip for station mode.
|
||
- **ap_timeout** (*Optional*, :ref:`time <config-time>`): The time after which to enable the
|
||
configured fallback hotspot. Defaults to ``1min``.
|
||
|
||
- **domain** (*Optional*, string): Set the domain of the node hostname used for uploading.
|
||
For example, if it's set to ``.local``, all uploads will be sent to ``<HOSTNAME>.local``.
|
||
Defaults to ``.local``.
|
||
- **reboot_timeout** (*Optional*, :ref:`time <config-time>`): The amount of time to wait before rebooting when no
|
||
WiFi connection exists. Can be disabled by setting this to ``0s``, but note that the low level IP stack currently
|
||
seems to have issues with WiFi where a full reboot is required to get the interface back working. Defaults to ``15min``.
|
||
- **power_save_mode** (*Optional*, string): The power save mode for the WiFi interface.
|
||
See :ref:`wifi-power_save_mode`
|
||
|
||
- **fast_connect** (*Optional*, boolean): If enabled, directly connects to WiFi network without doing a full scan
|
||
first. This is required for hidden networks and can significantly improve connection times. Defaults to ``off``.
|
||
The downside is that this option connects to the first network the ESP sees, even if that network is very far away and
|
||
better ones are available.
|
||
|
||
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
||
|
||
Access Point Mode
|
||
-----------------
|
||
|
||
ESPHome has an optional "Access Point Mode". If you include ``ap:``
|
||
in your wifi configuration, ESPHome will automatically set up an access point that you
|
||
can connect to. Additionally, you can specify both a "normal" station mode and AP mode at the
|
||
same time. This will cause ESPHome to only enable the access point when no connection
|
||
to the wifi router can be made.
|
||
|
||
.. _wifi-manual_ip:
|
||
|
||
Manual IPs
|
||
----------
|
||
|
||
If you're having problems with your node not connecting to WiFi or the connection
|
||
process taking a long time, it can be a good idea to assign a static IP address
|
||
to the ESP. This way, the ESP doesn't need to go through the slow DHCP process.
|
||
|
||
You can do so with the ``manual_ip:`` option in the WiFi configuration.
|
||
|
||
.. code-block:: yaml
|
||
|
||
wifi:
|
||
# ...
|
||
manual_ip:
|
||
# Set this to the IP of the ESP
|
||
static_ip: 10.0.0.42
|
||
# Set this to the IP address of the router. Often ends with .1
|
||
gateway: 10.0.0.1
|
||
# The subnet of the network. 255.255.255.0 works for most home networks.
|
||
subnet: 255.255.255.0
|
||
|
||
After putting a manual IP in your configuration, the ESP will no longer need to negotiate
|
||
a dynamic IP address with the router, thus improving the time until connection.
|
||
|
||
Additionally, this can help with :doc:`Over-The-Air updates <ota>` if for example the
|
||
home network doesn't allow for ``.local`` addresses. When a manual IP is in your configuration,
|
||
the OTA process will automatically choose that as the target for the upload.
|
||
|
||
.. note::
|
||
|
||
See also :ref:`esphome-changing_node_name`.
|
||
|
||
.. _wifi-power_save_mode:
|
||
|
||
Power Save Mode
|
||
---------------
|
||
|
||
The WiFi interface of all ESPs offer three power save modes to reduce the amount of power spent on
|
||
WiFi. While some options *can* reduce the power usage of the ESP, they generally also decrease the
|
||
reliability of the WiFi connection, with frequent disconnections from the router in the highest
|
||
power saving mode.
|
||
|
||
- ``NONE`` (least power saving, Default for ESP8266)
|
||
- ``LIGHT`` (Default for ESP32)
|
||
- ``HIGH`` (most power saving)
|
||
|
||
.. code-block:: yaml
|
||
|
||
wifi:
|
||
# ...
|
||
power_save_mode: none
|
||
|
||
.. _wifi-networks:
|
||
|
||
Connecting to Multiple Networks
|
||
-------------------------------
|
||
|
||
Starting with version 1.10.0, you can give ESPHome a number of WiFi networks to connect to.
|
||
ESPHome will then attempt to connect to the one with the highest signal strength.
|
||
|
||
To enable this mode, remove the ``ssid`` and ``password`` options from your wifi configuration
|
||
and move everything under the ``networks`` key:
|
||
|
||
.. code-block:: yaml
|
||
|
||
# Example configuration entry
|
||
wifi:
|
||
networks:
|
||
- ssid: FirstNetworkToConnectTo
|
||
password: VerySafePassword
|
||
- ssid: SecondNetworkToConnectTo
|
||
password: VerySafePassword
|
||
# Other options
|
||
# ...
|
||
|
||
Configuration variables:
|
||
|
||
- **ssid** (*Optional*, string): The SSID or WiFi network name.
|
||
- **password** (*Optional*, string): The password to use for authentication. Leave empty for no password.
|
||
- **channel** (*Optional*, int): The channel of the network (1-14). If given, only connects to networks
|
||
that are on this channel.
|
||
- **bssid** (*Optional*, string): Optionally define a BSSID (MAC-Address) of the network to connect to.
|
||
This can be used to further restrict which networks to connect to.
|
||
- **hidden** (*Optional*, boolean): Whether this network is hidden. Defaults to false.
|
||
If you add this option you also have to specify ssid.
|
||
- **priority** (*Optional*, float): The priority of this network. After each time, the network with
|
||
the highest priority is chosen. If the connection fails, the priority is decreased by one.
|
||
Defaults to ``0``.
|
||
|
||
.. _wifi-connected_condition:
|
||
|
||
``wifi.connected`` Condition
|
||
----------------------------
|
||
|
||
This :ref:`Condition <config-condition>` checks if the WiFi client is currently connected to a station.
|
||
|
||
.. code-block:: yaml
|
||
|
||
on_...:
|
||
if:
|
||
condition:
|
||
wifi.connected:
|
||
then:
|
||
- logger.log: WiFi is connected!
|
||
|
||
See Also
|
||
--------
|
||
|
||
- :doc:`captive_portal`
|
||
- :apiref:`wifi/wifi_component.h`
|
||
- :ghedit:`Edit`
|