esphome-docs/components/switch/uart.rst
Otto Winter 6053f490b5
Update svg2png and seo.py (#1380)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-16 15:19:33 +13:00

47 lines
1.4 KiB
ReStructuredText

UART Switch
===========
.. seo::
:description: Instructions for setting up UART switches in ESPHome that can output arbitrary UART sequences when activated.
:image: uart.svg
The ``uart`` switch platform allows you to send a pre-defined sequence of bytes on a
:doc:`UART bus </components/uart>` when triggered.
.. code-block:: yaml
# Example configuration entry
uart:
baud_rate: 9600
tx_pin: D0
switch:
- platform: uart
name: "UART String Output"
data: 'DataToSend'
- platform: uart
name: "UART Bytes Output"
data: [0xDE, 0xAD, 0xBE, 0xEF]
- platform: uart
name: "UART Recurring Output"
data: [0xDE, 0xAD, 0xBE, 0xEF]
send_every: 1s
Configuration variables:
------------------------
- **data** (**Required**, string or list of bytes): The data to send via UART. Either an ASCII string
or a list of bytes.
- **name** (**Required**, string): The name for the switch.
- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the UART hub.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **send_every** (*Optional*, :ref:`config-time`): Sends recurring data instead of sending once.
- All other options from :ref:`Switch <config-switch>`.
See Also
--------
- :doc:`/components/uart`
- :apiref:`uart/switch/uart_switch.h`
- :ghedit:`Edit`