mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-10-31 08:31:29 +01:00
41 lines
1.5 KiB
ReStructuredText
41 lines
1.5 KiB
ReStructuredText
Dallas Temperature Component
|
|
============================
|
|
|
|
The ``dallas`` component allows you to use your
|
|
`DS18b20 <https://www.adafruit.com/product/374>`__
|
|
(`datasheet <https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf>`__)
|
|
and similar One-Wire temperature sensors.
|
|
|
|
To use your dallas sensor, first define a dallas “hub” with a pin and
|
|
id, which you will later use to create the sensors. The 1-Wire bus the
|
|
sensors are connected to should have an external pullup resistor of
|
|
about 4.7KΩ. For this, connect a resistor of *about* 4.7KΩ (values around that like 1Ω will, if you don't have
|
|
massively long wires, work fine in most cases) between ``3.3V`` and the data pin.
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
dallas:
|
|
- pin: 23
|
|
|
|
# Individual sensors
|
|
sensor:
|
|
- platform: dallas
|
|
address: 0x1c0000031edd2a28
|
|
name: "Livingroom Temperature"
|
|
|
|
Configuration variables:
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- **pin** (**Required**, number): The pin the sensor bus is connected to.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval that the sensors should be checked.
|
|
Defaults to 15 seconds. See :ref:`sensor-default_filter`.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
|
|
See Also
|
|
^^^^^^^^
|
|
|
|
- :doc:`sensor/dallas`
|
|
- :doc:`API Reference </api/sensor/dallas>`
|
|
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/dallas.rst>`__
|