mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-18 11:15:36 +01:00
88e315e0e4
* Many example yaml tidy-ups * Update components/sensor/hlw8012.rst --------- Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
174 lines
7.3 KiB
ReStructuredText
174 lines
7.3 KiB
ReStructuredText
Havells Solar
|
|
=============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up Havells inverter reading on modbus.
|
|
:image: havellsgti5000d_s.jpg
|
|
:keywords: Havells Enviro, Havells GTI
|
|
|
|
The ``Havells Inverter`` sensor platform allows you to use Havells inverter data reading on modbus
|
|
(`website <https://www.havells.com/en/consumer/solar/solar-on-grid-inverter-and-solutions/solar-on-grid-inverter.html>`__)
|
|
with ESPHome.
|
|
|
|
.. figure:: images/havellsgti5000d.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
Havells On Grid Solar Inverter.
|
|
|
|
The communication with this component is done via a :ref:`UART <uart>` using :ref:`Modbus <modbus>`.
|
|
You must therefore have a ``uart:`` and ``modbus:`` entry in your configuration with both the TX and RX pins set
|
|
to some pins on your board and the baud rate set to 9600.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: havells_solar
|
|
update_interval: 60s
|
|
phase_a:
|
|
voltage:
|
|
name: "HAVELLS Phase A Voltage"
|
|
current:
|
|
name: "HAVELLS Phase A Current"
|
|
phase_b:
|
|
voltage:
|
|
name: "HAVELLS Voltage Phase B"
|
|
current:
|
|
name: "HAVELLS Current Phase B"
|
|
phase_c:
|
|
voltage:
|
|
name: "HAVELLS Voltage Phase C"
|
|
current:
|
|
name: "HAVELLS Current Phase C"
|
|
pv1:
|
|
voltage:
|
|
name: "HAVELLS PV1 Voltage"
|
|
current:
|
|
name: "HAVELLS PV1 Current"
|
|
active_power:
|
|
name: "HAVELLS PV1 Active Power"
|
|
voltage_sampled_by_secondary_cpu:
|
|
name: "HAVELLS PV1 Voltage Sampled By Slave CPU"
|
|
insulation_of_p_to_ground:
|
|
name: "HAVELLS PV1 Insulation Of +VE To Ground"
|
|
pv2:
|
|
voltage:
|
|
name: "HAVELLS PV2 Voltage"
|
|
current:
|
|
name: "HAVELLS PV2 Current"
|
|
active_power:
|
|
name: "HAVELLS PV2 Active Power"
|
|
voltage_sampled_by_secondary_cpu:
|
|
name: "HAVELLS PV2 Voltage Sampled By Slave CPU"
|
|
insulation_of_p_to_ground:
|
|
name: "HAVELLS PV2 Insulation Of +VE To Ground"
|
|
active_power:
|
|
name: "HAVELLS Active Power"
|
|
reactive_power:
|
|
name: "HAVELLS Reactive Power"
|
|
frequency:
|
|
name: "HAVELLS Frequency"
|
|
energy_production_day:
|
|
name: "HAVELLS Today's Generation"
|
|
total_energy_production:
|
|
name: "HAVELLS Total Energy Production"
|
|
total_generation_time:
|
|
name: "HAVELLS Total Generation Time"
|
|
today_generation_time:
|
|
name: "HAVELLS Today Generation Time"
|
|
inverter_module_temp:
|
|
name: "HAVELLS Inverter Module Temp"
|
|
inverter_inner_temp:
|
|
name: "HAVELLS Inverter Inner Temp"
|
|
inverter_bus_voltage:
|
|
name: "HAVELLS Inverter BUS Voltage"
|
|
insulation_of_pv_n_to_ground:
|
|
name: "HAVELLS Insulation Of PV- To Ground"
|
|
gfci_value:
|
|
name: "HAVELLS GFCI Value"
|
|
dci_of_r:
|
|
name: "HAVELLS DCI Of R"
|
|
dci_of_s:
|
|
name: "HAVELLS DCI Of S"
|
|
dci_of_t:
|
|
name: "HAVELLS DCI Of T"
|
|
|
|
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **phase_a** (*Optional*): The group of exposed sensors for Phase A/1.
|
|
|
|
- **current** (*Optional*): Use the current value of the sensor in amperes. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **voltage** (*Optional*): Use the voltage value of the sensor in volts.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **phase_b** (*Optional*): The group of exposed sensors for Phase B/2 on applicable inverters.
|
|
|
|
- All options from **phase_a**
|
|
|
|
- **phase_c** (*Optional*): The group of exposed sensors for Phase C/3 on applicable inverters.
|
|
|
|
- All options from **phase_a**
|
|
|
|
- **pv1** (*Optional*): The group of exposed sensors for Photo Voltaic 1.
|
|
|
|
- **current** (*Optional*): Use the current value of the sensor in amperes. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **voltage** (*Optional*): Use the voltage value of the sensor in volts.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **active_power** (*Optional*): Use the (active) power value of the sensor in watts. All options
|
|
from :ref:`Sensor <config-sensor>`.
|
|
- **voltage_sampled_by_secondary_cpu** (*Optional*): Use the photo voltiac's voltage sampled by
|
|
slave CPU value of the sensor in volts. All options from :ref:`Sensor <config-sensor>`.
|
|
- **insulation_of_p_to_ground** (*Optional*): Use the insulation of photo voltiac's +ve terminal to
|
|
ground value of the sensor in kilo ohms. All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **pv2** (*Optional*): The group of exposed sensors for Photo Voltaic 2.
|
|
|
|
- All options from **pv1**
|
|
|
|
- **active_power** (*Optional*): Use the (active) power value of the sensor in watts. All options
|
|
from :ref:`Sensor <config-sensor>`.
|
|
- **reactive_power** (*Optional*): Use the reactive power value of the sensor in VAR. All
|
|
options from :ref:`Sensor <config-sensor>`.
|
|
- **frequency** (*Optional*): Use the frequency value of the sensor in hertz.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **energy_production_day** (*Optional*): Use the export active energy value for same day of the
|
|
sensor in kilo watt hours. All options from :ref:`Sensor <config-sensor>`.
|
|
- **total_energy_production** (*Optional*): Use the total exported energy value of the sensor in
|
|
kilo watt hours. All options from :ref:`Sensor <config-sensor>`.
|
|
- **total_generation_time** (*Optional*): Use the total generation time value of the sensor in
|
|
hours. All options from :ref:`Sensor <config-sensor>`.
|
|
- **today_generation_time** (*Optional*): Use the day generation time value for same day of the
|
|
sensor in minutes. All options from :ref:`Sensor <config-sensor>`.
|
|
- **inverter_module_temp** (*Optional*): Use the inverter module temperature value of the sensor in
|
|
degree celsius. All options from :ref:`Sensor <config-sensor>`.
|
|
- **inverter_inner_temp** (*Optional*): Use the inverter inner temperature value of the sensor in
|
|
degree celsius. All options from :ref:`Sensor <config-sensor>`.
|
|
- **inverter_bus_voltage** (*Optional*): Use the inverter bus voltage value of the sensor in volts.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **insulation_of_pv_n_to_ground** (*Optional*): Use the insulation of photo voltiacs's
|
|
-ve terminal to ground value of the sensor in kilo ohms. All options from :ref:`Sensor <config-sensor>`.
|
|
- **gfci_value** (*Optional*): Use the GFCI value of the sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **dci_of_r** (*Optional*): Use the DCI of R value of the sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **dci_of_s** (*Optional*): Use the DCI of S value of the sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **dci_of_t** (*Optional*): Use the DCI of T value of the sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
- **address** (*Optional*, int): The address of the sensor if multiple sensors are attached to
|
|
the same UART bus. You will need to set the address of each device manually. Defaults to ``1``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :ghedit:`Edit`
|