mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-14 10:35:27 +01:00
101005f1f1
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> Co-authored-by: Samuel Sieb <samuel@sieb.net>
56 lines
2.0 KiB
ReStructuredText
56 lines
2.0 KiB
ReStructuredText
MAX31855 K-Type Thermocouple Temperature Sensor
|
|
===============================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MAX31855 Thermocouple temperature sensors.
|
|
:image: max31855.jpg
|
|
|
|
The ``max31855`` temperature sensor allows you to use your MAX31855 thermocouple
|
|
temperature sensor (`datasheet <https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf>`__) with ESPHome
|
|
|
|
As the communication with the MAX31855 is done using SPI, you need
|
|
to have an :ref:`SPI bus <spi>` in your configuration with the **miso_pin** set (MOSI is not required).
|
|
|
|
Connect ``GND`` to ``GND``, ``VCC`` to ``3.3V`` and the other three ``MISO`` (or ``SO`` for short),
|
|
``CS`` and ``CLOCK`` (or ``CLK``) to free GPIO pins.
|
|
|
|
.. figure:: images/temperature.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
spi:
|
|
miso_pin: D0
|
|
clk_pin: D1
|
|
|
|
sensor:
|
|
- platform: max31855
|
|
name: "Living Room Temperature"
|
|
cs_pin: D2
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (**Required**, string): The name for the temperature sensor.
|
|
- **cs_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The Chip Select pin of the SPI interface.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
|
|
- **reference_temperature** (*Optional*, :ref:`config-id`): Access the internal temperature sensor of the MAX31855. Requires a **name** and/or **id**.
|
|
- **spi_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`SPI Component <spi>` if you want to use multiple SPI buses.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`dht`
|
|
- :doc:`adc`
|
|
- :doc:`max6675`
|
|
- :doc:`max31865`
|
|
- `MAX31855 Library <https://github.com/adafruit/Adafruit-MAX31855-library>`__ by `Adafruit <https://www.adafruit.com/>`__
|
|
- :apiref:`max31855/max31855.h`
|
|
- :ghedit:`Edit`
|