Upstream/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2024-12-21 16:27:44 +01:00
Code Issues Projects Releases Wiki Activity

Fix a bunch of typos (#2058)

Browse Source 
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
This commit is contained in:
Oxan van Leeuwen 2021-07-26 14:48:57 +02:00 committed by GitHub
parent 6b535b11f8
commit a3dcac62f9
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
33 changed files with 63 additions and 63 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
esphome/components/ac_dimmer/ac_dimmer.cpp
View File

@ -125,7 +125,7 @@ void ICACHE_RAM_ATTR HOT AcDimmerDataStore::gpio_intr() {
}
void ICACHE_RAM_ATTR HOT AcDimmerDataStore::s_gpio_intr(AcDimmerDataStore *store) {
// Attaching pin interrupts on the same pin will override the previous interupt
// Attaching pin interrupts on the same pin will override the previous interrupt
// However, the user expects that multiple dimmers sharing the same ZC pin will work.
// We solve this in a bit of a hacky way: On each pin interrupt, we check all dimmers
// if any of them are using the same ZC pin, and also trigger the interrupt for *them*.

8
esphome/components/aht10/aht10.cpp
View File

@ -10,7 +10,7 @@
//
// According to the datasheet, the component is supposed to respond in more than 75ms. In fact, it can answer almost
// immediately for temperature. But for humidity, it takes >90ms to get a valid data. From experience, we have best
// results making successive requests; the current implementation make 3 attemps with a delay of 30ms each time.
// results making successive requests; the current implementation makes 3 attempts with a delay of 30ms each time.
#include "aht10.h"
#include "esphome/core/log.h"
@ -23,7 +23,7 @@ static const uint8_t AHT10_CALIBRATE_CMD[] = {0xE1};
static const uint8_t AHT10_MEASURE_CMD[] = {0xAC, 0x33, 0x00};
static const uint8_t AHT10_DEFAULT_DELAY = 5; // ms, for calibration and temperature measurement
static const uint8_t AHT10_HUMIDITY_DELAY = 30; // ms
static const uint8_t AHT10_ATTEMPS = 3; // safety margin, normally 3 attemps are enough: 3*30=90ms
static const uint8_t AHT10_ATTEMPTS = 3; // safety margin, normally 3 attempts are enough: 3*30=90ms
void AHT10Component::setup() {
ESP_LOGCONFIG(TAG, "Setting up AHT10...");
@ -58,8 +58,8 @@ void AHT10Component::update() {
uint8_t delay = AHT10_DEFAULT_DELAY;
if (this->humidity_sensor_ != nullptr)
delay = AHT10_HUMIDITY_DELAY;
for (int i = 0; i < AHT10_ATTEMPS; ++i) {
ESP_LOGVV(TAG, "Attemps %u at %6ld", i, millis());
for (int i = 0; i < AHT10_ATTEMPTS; ++i) {
ESP_LOGVV(TAG, "Attempt %u at %6ld", i, millis());
delay_microseconds_accurate(4);
if (!this->read_bytes(0, data, 6, delay)) {
ESP_LOGD(TAG, "Communication with AHT10 failed, waiting...");

2
esphome/components/atm90e32/atm90e32_reg.h
View File

@ -39,7 +39,7 @@ static const uint16_t ATM90E32_STATUS_S0_OVPHASEBST = 1 << 11; // Over voltage
static const uint16_t ATM90E32_STATUS_S0_OVPHASECST = 1 << 10; // Over voltage on phase C
static const uint16_t ATM90E32_STATUS_S0_UREVWNST = 1 << 9; // Voltage Phase Sequence Error status
static const uint16_t ATM90E32_STATUS_S0_IREVWNST = 1 << 8; // Current Phase Sequence Error status
static const uint16_t ATM90E32_STATUS_S0_INOV0ST = 1 << 7; // Calculated N line current greater tha INWarnTh reg
static const uint16_t ATM90E32_STATUS_S0_INOV0ST = 1 << 7; // Calculated N line current greater than INWarnTh reg
static const uint16_t ATM90E32_STATUS_S0_TQNOLOADST = 1 << 6; // All phase sum reactive power no-load condition status
static const uint16_t ATM90E32_STATUS_S0_TPNOLOADST = 1 << 5; // All phase sum active power no-load condition status
static const uint16_t ATM90E32_STATUS_S0_TASNOLOADST = 1 << 4; // All phase sum apparent power no-load status

2
esphome/components/b_parasite/b_parasite.cpp
View File

@ -47,7 +47,7 @@ bool BParasite::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
uint16_t battery_millivolt = data[2] << 8 | data[3];
float battery_voltage = battery_millivolt / 1000.0f;
// Temperature in 1000 * Celcius.
// Temperature in 1000 * Celsius.
uint16_t temp_millicelcius = data[4] << 8 | data[5];
float temp_celcius = temp_millicelcius / 1000.0f;

2
esphome/components/dallas/dallas_component.cpp
View File

@ -137,7 +137,7 @@ void DallasComponent::update() {
}
if (!res) {
ESP_LOGW(TAG, "'%s' - Reseting bus for read failed!", sensor->get_name().c_str());
ESP_LOGW(TAG, "'%s' - Resetting bus for read failed!", sensor->get_name().c_str());
sensor->publish_state(NAN);
this->status_set_warning();
return;

2
esphome/components/dht/dht.cpp
View File

@ -203,7 +203,7 @@ bool HOT ICACHE_RAM_ATTR DHT::read_sensor_(float *temperature, float *humidity,
const uint16_t raw_humidity = uint16_t(data[0]) * 10 + data[1];
*humidity = raw_humidity / 10.0f;
} else {
// For compatibily with DHT11 models which might only use 2 bytes checksums, only use the data from these two
// For compatibility with DHT11 models which might only use 2 bytes checksums, only use the data from these two
// bytes
*temperature = data[2];
*humidity = data[0];

2
esphome/components/e131/e131.cpp
View File

@ -50,7 +50,7 @@ void E131Component::loop() {
}
if (!packet_(payload, universe, packet)) {
ESP_LOGV(TAG, "Invalid packet recevied of size %zu.", payload.size());
ESP_LOGV(TAG, "Invalid packet received of size %zu.", payload.size());
continue;
}

2
esphome/components/esp32_ble/queue.h
View File

@ -13,7 +13,7 @@
/*
* BLE events come in from a separate Task (thread) in the ESP32 stack. Rather
* than trying to deal wth various locking strategies, all incoming GAP and GATT
* than trying to deal with various locking strategies, all incoming GAP and GATT
* events will simply be placed on a semaphore guarded queue. The next time the
* component runs loop(), these events are popped off the queue and handed at
* this safer time.

2
esphome/components/esp32_ble_tracker/queue.h
View File

@ -12,7 +12,7 @@
/*
* BLE events come in from a separate Task (thread) in the ESP32 stack. Rather
* than trying to deal wth various locking strategies, all incoming GAP and GATT
* than trying to deal with various locking strategies, all incoming GAP and GATT
* events will simply be placed on a semaphore guarded queue. The next time the
* component runs loop(), these events are popped off the queue and handed at
* this safer time.

2
esphome/components/ethernet/ethernet_component.cpp
View File

@ -9,7 +9,7 @@
#include <eth_phy/phy_tlk110.h>
#include <lwip/dns.h>
/// Macro for IDF version comparision
/// Macro for IDF version comparison
#ifndef ESP_IDF_VERSION_VAL
#define ESP_IDF_VERSION_VAL(major, minor, patch) (((major) << 16) | ((minor) << 8) | (patch))
#endif

2
esphome/components/fujitsu_general/fujitsu_general.h
View File

@ -62,7 +62,7 @@ class FujitsuGeneralClimate : public climate_ir::ClimateIR {
/// Transmit via IR power off command.
void transmit_off_();
/// Parse incomming message
/// Parse incoming message
bool on_receive(remote_base::RemoteReceiveData data) override;
/// Transmit message as IR pulses

8
esphome/components/inkbird_ibsth1_mini/inkbird_ibsth1_mini.cpp
View File

@ -23,9 +23,9 @@ bool InkbirdIBSTH1_MINI::parse_device(const esp32_ble_tracker::ESPBTDevice &devi
// for Inkbird IBS-TH1 Mini device we expect
// 1) expected mac address
// 2) device address type == PUBLIC
// 3) no service datas
// 4) one manufacturer datas
// 5) the manufacturer datas should contain a 16-bit uuid amd a 7-byte data vector
// 3) no service data
// 4) one manufacturer data
// 5) the manufacturer data should contain a 16-bit uuid amd a 7-byte data vector
// 6) the 7-byte data component should have data[2] == 0 and data[6] == 8
// the address should match the address we declared
@ -63,7 +63,7 @@ bool InkbirdIBSTH1_MINI::parse_device(const esp32_ble_tracker::ESPBTDevice &devi
// sensor output encoding
// data[5] is a battery level
// data[0] and data[1] is humidity * 100 (in pct)
// uuid is a temperature * 100 (in Celcius)
// uuid is a temperature * 100 (in Celsius)
// when data[2] == 0 temperature is from internal sensor (IBS-TH1 or IBS-TH1 Mini)
// when data[2] == 1 temperature is from external sensor (IBS-TH1 only)

6
esphome/components/max7219digit/max7219digit.cpp
View File

@ -104,7 +104,7 @@ void MAX7219Component::display() {
uint8_t pixels[8];
// Run this loop for every MAX CHIP (GRID OF 64 leds)
// Run this routine for the rows of every chip 8x row 0 top to 7 bottom
// Fill the pixel parameter with diplay data
// Fill the pixel parameter with display data
// Send the data to the chip
for (uint8_t i = 0; i < this->num_chips_; i++) {
for (uint8_t j = 0; j < 8; j++) {
@ -119,7 +119,7 @@ void MAX7219Component::display() {
}
int MAX7219Component::get_height_internal() {
return 8; // TO BE DONE -> STACK TWO DISPLAYS ON TOP OF EACH OTHE
return 8; // TO BE DONE -> STACK TWO DISPLAYS ON TOP OF EACH OTHER
// TO BE DONE -> CREATE Virtual size of screen and scroll
}
@ -238,7 +238,7 @@ void MAX7219Component::send64pixels(uint8_t chip, const uint8_t pixels[8]) {
} else {
b = pixels[7 - col];
}
// send this byte to dispay at selected chip
// send this byte to display at selected chip
if (this->invert_) {
this->send_byte_(col + 1, ~b);
} else {

2
esphome/components/nextion/nextion.cpp
View File

@ -1015,7 +1015,7 @@ void Nextion::add_no_result_to_queue_with_set_internal_(const std::string &varia
*
* @param variable_name Variable name for the queue
* @param variable_name_to_send Variable name for the left of the command
* @param state_value Sting value to set
* @param state_value String value to set
* @param is_sleep_safe The command is safe to send when the Nextion is sleeping
*/
void Nextion::add_no_result_to_queue_with_set(NextionComponentBase *component, const std::string &state_value) {

8
esphome/components/nextion/nextion.h
View File

@ -419,7 +419,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
* fill_area(50, 50, 100, 100, "RED");
* ```
*
* Fills an area that starts at x coordiante `50` and y coordinate `50` with a height of `100` and width of `100` with
* Fills an area that starts at x coordinate `50` and y coordinate `50` with a height of `100` and width of `100` with
* the color of blue. Use this [color picker](https://nodtem66.github.io/nextion-hmi-color-convert/index.html) to
* convert color codes to Nextion HMI colors
*/
@ -437,7 +437,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
* fill_area(50, 50, 100, 100, color);
* ```
*
* Fills an area that starts at x coordiante `50` and y coordinate `50` with a height of `100` and width of `100` with
* Fills an area that starts at x coordinate `50` and y coordinate `50` with a height of `100` and width of `100` with
* the color of blue. Use this [color picker](https://nodtem66.github.io/nextion-hmi-color-convert/index.html) to
* convert color codes to Nextion HMI colors
*/
@ -546,7 +546,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
* it.filled_cricle(25, 25, 10, "17013");
* ```
*
* Makes a filled circle at the x cordinates `25` and y coordinate `25` with a radius of `10` with a color of blue.
* Makes a filled circle at the x coordinate `25` and y coordinate `25` with a radius of `10` with a color of blue.
* Use this [color picker](https://nodtem66.github.io/nextion-hmi-color-convert/index.html) to convert color codes to
* Nextion HMI colors.
*/
@ -563,7 +563,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
* it.filled_cricle(25, 25, 10, color);
* ```
*
* Makes a filled circle at the x cordinates `25` and y coordinate `25` with a radius of `10` with a color of blue.
* Makes a filled circle at the x coordinate `25` and y coordinate `25` with a radius of `10` with a color of blue.
* Use this [color picker](https://nodtem66.github.io/nextion-hmi-color-convert/index.html) to convert color codes to
* Nextion HMI colors.
*/

2
esphome/components/nextion/nextion_upload.cpp
View File

@ -305,7 +305,7 @@ void Nextion::upload_tft() {
App.feed_wdt();
ESP_LOGD(TAG, "Heap Size %d, Bytes left %d", ESP.getFreeHeap(), this->content_length_);
}
ESP_LOGD(TAG, "Succesfully updated Nextion!");
ESP_LOGD(TAG, "Successfully updated Nextion!");
this->upload_end_();
}

2
esphome/components/qmc5883l/qmc5883l.cpp
View File

@ -116,7 +116,7 @@ void QMC5883LComponent::update() {
bool QMC5883LComponent::read_byte_16_(uint8_t a_register, uint16_t *data) {
bool success = this->read_byte_16(a_register, data);
*data = (*data & 0x00FF) << 8 | (*data & 0xFF00) >> 8; // Flip Byte oder, LSB first;
*data = (*data & 0x00FF) << 8 | (*data & 0xFF00) >> 8; // Flip Byte order, LSB first;
return success;
}

4
esphome/components/rc522/rc522.cpp
View File

@ -162,7 +162,7 @@ void RC522::loop() {
ESP_LOGW(TAG, "CMD_REQA -> Not OK %d", status);
state_ = STATE_DONE;
} else if (back_length_ != 2) { // || *valid_bits_ != 0) { // ATQA must be exactly 16 bits.
ESP_LOGW(TAG, "CMD_REQA -> OK, but unexpacted back_length_ of %d", back_length_);
ESP_LOGW(TAG, "CMD_REQA -> OK, but unexpected back_length_ of %d", back_length_);
state_ = STATE_DONE;
} else {
state_ = STATE_READ_SERIAL;
@ -470,7 +470,7 @@ RC522::StatusCode RC522::await_crc_() {
return STATUS_WAITING;
ESP_LOGD(TAG, "pcd_calculate_crc_() TIMEOUT");
// 89ms passed and nothing happend. Communication with the MFRC522 might be down.
// 89ms passed and nothing happened. Communication with the MFRC522 might be down.
return STATUS_TIMEOUT;
}

2
esphome/components/rc522/rc522.h
View File

@ -32,7 +32,7 @@ class RC522 : public PollingComponent {
STATUS_OK, // Success
STATUS_WAITING, // Waiting result from RC522 chip
STATUS_ERROR, // Error in communication
STATUS_COLLISION, // Collission detected
STATUS_COLLISION, // Collision detected
STATUS_TIMEOUT, // Timeout in communication.
STATUS_NO_ROOM, // A buffer is not big enough.
STATUS_INTERNAL_ERROR, // Internal error in the code. Should not happen ;-)

2
esphome/components/remote_base/remote_base.cpp
View File

@ -16,7 +16,7 @@ RemoteRMTChannel::RemoteRMTChannel(uint8_t mem_block_num) : mem_block_num_(mem_b
void RemoteRMTChannel::config_rmt(rmt_config_t &rmt) {
if (rmt_channel_t(int(this->channel_) + this->mem_block_num_) > RMT_CHANNEL_7) {
this->mem_block_num_ = int(RMT_CHANNEL_7) - int(this->channel_) + 1;
ESP_LOGW(TAG, "Not enough RMT memory blocks avaiable, reduced to %i blocks.", this->mem_block_num_);
ESP_LOGW(TAG, "Not enough RMT memory blocks available, reduced to %i blocks.", this->mem_block_num_);
}
rmt.channel = this->channel_;
rmt.clk_div = this->clock_divider_;

2
esphome/components/scd30/scd30.cpp
View File

@ -55,7 +55,7 @@ void SCD30Component::setup() {
// According ESP32 clock stretching is typically 30ms and up to 150ms "due to
// internal calibration processes". The I2C peripheral only supports 13ms (at
// least when running at 80MHz).
// In practise it seems that clock stretching occures during this calibration
// In practise it seems that clock stretching occurs during this calibration
// calls. It also seems that delays in between calls makes them
// disappear/shorter. Hence work around with delays for ESP32.
//

2
esphome/components/script/__init__.py
View File

@ -50,7 +50,7 @@ def assign_declare_id(value):
CONFIG_SCHEMA = automation.validate_automation(
{
# Don't declare id as cv.declare_id yet, because the ID type
# dpeends on the mode. Will be checked later with assign_declare_id
# depends on the mode. Will be checked later with assign_declare_id
cv.Required(CONF_ID): cv.string_strict,
cv.Optional(CONF_MODE, default=CONF_SINGLE): cv.one_of(
*SCRIPT_MODES, lower=True

2
esphome/components/script/script.h
View File

@ -65,7 +65,7 @@ class QueueingScript : public Script, public Component {
/** A script type that executes new instances in parallel.
*
* If a new instance is started while previous ones haven't finished yet,
* the new one is exeucted in parallel to the other instances.
* the new one is executed in parallel to the other instances.
*/
class ParallelScript : public Script {
public:

2
esphome/components/ssd1331_base/ssd1331_base.cpp
View File

@ -19,7 +19,7 @@ static const uint8_t SSD1331_DRAWLINE = 0x21; // Draw line
static const uint8_t SSD1331_DRAWRECT = 0x22; // Draw rectangle
static const uint8_t SSD1331_FILL = 0x26; // Fill enable/disable
static const uint8_t SSD1331_SETCOLUMN = 0x15; // Set column address
static const uint8_t SSD1331_SETROW = 0x75; // Set row adress
static const uint8_t SSD1331_SETROW = 0x75; // Set row address
static const uint8_t SSD1331_CONTRASTA = 0x81; // Set contrast for color A
static const uint8_t SSD1331_CONTRASTB = 0x82; // Set contrast for color B
static const uint8_t SSD1331_CONTRASTC = 0x83; // Set contrast for color C

32
esphome/components/st7789v/st7789v.h
View File

@ -19,13 +19,13 @@ static const uint8_t ST7789_RDDMADCTL = 0x0B; // Read Display MADCTL
static const uint8_t ST7789_RDDCOLMOD = 0x0C; // Read Display Pixel Format
static const uint8_t ST7789_RDDIM = 0x0D; // Read Display Image Mode
static const uint8_t ST7789_RDDSM = 0x0E; // Read Display Signal Mod
static const uint8_t ST7789_RDDSDR = 0x0F; // Read Display Self-Diagnostic Resul
static const uint8_t ST7789_RDDSDR = 0x0F; // Read Display Self-Diagnostic Result
static const uint8_t ST7789_SLPIN = 0x10; // Sleep in
static const uint8_t ST7789_SLPOUT = 0x11; // Sleep Out
static const uint8_t ST7789_PTLON = 0x12; // Partial Display Mode O
static const uint8_t ST7789_NORON = 0x13; // Normal Display Mode O
static const uint8_t ST7789_PTLON = 0x12; // Partial Display Mode On
static const uint8_t ST7789_NORON = 0x13; // Normal Display Mode On
static const uint8_t ST7789_INVOFF = 0x20; // Display Inversion Off
static const uint8_t ST7789_INVON = 0x21; // Display Inversion O
static const uint8_t ST7789_INVON = 0x21; // Display Inversion On
static const uint8_t ST7789_GAMSET = 0x26; // Gamma Set
static const uint8_t ST7789_DISPOFF = 0x28; // Display Off
static const uint8_t ST7789_DISPON = 0x29; // Display On
@ -34,18 +34,18 @@ static const uint8_t ST7789_RASET = 0x2B; // Row Address Set
static const uint8_t ST7789_RAMWR = 0x2C; // Memory Write
static const uint8_t ST7789_RAMRD = 0x2E; // Memory Read
static const uint8_t ST7789_PTLAR = 0x30; // Partial Area
static const uint8_t ST7789_VSCRDEF = 0x33; // Vertical Scrolling Definitio
static const uint8_t ST7789_TEOFF = 0x34; // Tearing Effect Line OFF
static const uint8_t ST7789_VSCRDEF = 0x33; // Vertical Scrolling Definition
static const uint8_t ST7789_TEOFF = 0x34; // Tearing Effect Line Off
static const uint8_t ST7789_TEON = 0x35; // Tearing Effect Line On
static const uint8_t ST7789_MADCTL = 0x36; // Memory Data Access Control
static const uint8_t ST7789_VSCSAD = 0x37; // Vertical Scroll Start Address of RAM
static const uint8_t ST7789_IDMOFF = 0x38; // Idle Mode Off
static const uint8_t ST7789_IDMON = 0x39; // Idle mode on
static const uint8_t ST7789_IDMON = 0x39; // Idle Mode On
static const uint8_t ST7789_COLMOD = 0x3A; // Interface Pixel Format
static const uint8_t ST7789_WRMEMC = 0x3C; // Write Memory Continue
static const uint8_t ST7789_RDMEMC = 0x3E; // Read Memory Continue
static const uint8_t ST7789_STE = 0x44; // Set Tear Scanline
static const uint8_t ST7789_GSCAN = 0x45; // Get Scanlin
static const uint8_t ST7789_GSCAN = 0x45; // Get Scanline
static const uint8_t ST7789_WRDISBV = 0x51; // Write Display Brightness
static const uint8_t ST7789_RDDISBV = 0x52; // Read Display Brightness Value
static const uint8_t ST7789_WRCTRLD = 0x53; // Write CTRL Display
@ -59,17 +59,17 @@ static const uint8_t ST7789_RDID1 = 0xDA; // Read ID1
static const uint8_t ST7789_RDID2 = 0xDB; // Read ID2
static const uint8_t ST7789_RDID3 = 0xDC; // Read ID3
static const uint8_t ST7789_RAMCTRL = 0xB0; // RAM Control
static const uint8_t ST7789_RGBCTRL = 0xB1; // RGB Interface Contro
static const uint8_t ST7789_RGBCTRL = 0xB1; // RGB Interface Control
static const uint8_t ST7789_PORCTRL = 0xB2; // Porch Setting
static const uint8_t ST7789_FRCTRL1 = 0xB3; // Frame Rate Control 1 (In partial mode/ idle colors)
static const uint8_t ST7789_PARCTRL = 0xB5; // Partial mode Contro
static const uint8_t ST7789_GCTRL = 0xB7; // Gate Contro
static const uint8_t ST7789_GTADJ = 0xB8; // Gate On Timing Adjustmen
static const uint8_t ST7789_PARCTRL = 0xB5; // Partial mode Control
static const uint8_t ST7789_GCTRL = 0xB7; // Gate Control
static const uint8_t ST7789_GTADJ = 0xB8; // Gate On Timing Adjustment
static const uint8_t ST7789_DGMEN = 0xBA; // Digital Gamma Enable
static const uint8_t ST7789_VCOMS = 0xBB; // VCOMS Setting
static const uint8_t ST7789_LCMCTRL = 0xC0; // LCM Control
static const uint8_t ST7789_IDSET = 0xC1; // ID Code Settin
static const uint8_t ST7789_VDVVRHEN = 0xC2; // VDV and VRH Command Enabl
static const uint8_t ST7789_IDSET = 0xC1; // ID Code Setting
static const uint8_t ST7789_VDVVRHEN = 0xC2; // VDV and VRH Command Enable
static const uint8_t ST7789_VRHS = 0xC3; // VRH Set
static const uint8_t ST7789_VDVS = 0xC4; // VDV Set
static const uint8_t ST7789_VCMOFSET = 0xC5; // VCOMS Offset Set
@ -89,8 +89,8 @@ static const uint8_t ST7789_GATECTRL = 0xE4; // Gate Control
static const uint8_t ST7789_SPI2EN = 0xE7; // SPI2 Enable
static const uint8_t ST7789_PWCTRL2 = 0xE8; // Power Control 2
static const uint8_t ST7789_EQCTRL = 0xE9; // Equalize time control
static const uint8_t ST7789_PROMCTRL = 0xEC; // Program Mode Contro
static const uint8_t ST7789_PROMEN = 0xFA; // Program Mode Enabl
static const uint8_t ST7789_PROMCTRL = 0xEC; // Program Mode Control
static const uint8_t ST7789_PROMEN = 0xFA; // Program Mode Enable
static const uint8_t ST7789_NVMSET = 0xFC; // NVM Setting
static const uint8_t ST7789_PROMACT = 0xFE; // Program action

2
esphome/components/sx1509/sx1509_registers.h
View File

@ -9,7 +9,7 @@ Here you'll find the Arduino code used to interface with the SX1509 I2C
16 I/O expander. There are functions to take advantage of everything the
SX1509 provides - input/output setting, writing pins high/low, reading
the input value of pins, LED driver utilities (blink, breath, pwm), and
keypad engine utilites.
keypad engine utilities.
Development environment specifics:
IDE: Arduino 1.6.5

4
esphome/components/tuya/tuya.cpp
View File

@ -163,7 +163,7 @@ void Tuya::handle_command_(uint8_t command, uint8_t version, const uint8_t *buff
this->gpio_reset_ = buffer[1];
}
if (this->init_state_ == TuyaInitState::INIT_CONF) {
// If mcu returned status gpio, then we can ommit sending wifi state
// If mcu returned status gpio, then we can omit sending wifi state
if (this->gpio_status_ != -1) {
this->init_state_ = TuyaInitState::INIT_DATAPOINT;
this->send_empty_command_(TuyaCommandType::DATAPOINT_QUERY);
@ -363,7 +363,7 @@ void Tuya::process_command_queue_() {
this->expected_response_.reset();
}
// Left check of delay since last command in case theres ever a command sent by calling send_raw_command_ directly
// Left check of delay since last command in case there's ever a command sent by calling send_raw_command_ directly
if (delay > COMMAND_DELAY && !this->command_queue_.empty() && this->rx_message_.empty() &&
!this->expected_response_.has_value()) {
this->send_raw_command_(command_queue_.front());

2
esphome/components/vl53l0x/LICENSE.txt
View File

@ -3,7 +3,7 @@ by Pololu (Pololu Corporation), which in turn is based on the VL53L0X
API from ST. The code has been adapted to work with ESPHome's i2c APIs.
Please see the top-level LICENSE.txt for information about ESPHome's license.
The licenses for Pololu's and ST's software are included below.
Orignally taken from https://github.com/pololu/vl53l0x-arduino (accessed 20th october 2019).
Originally taken from https://github.com/pololu/vl53l0x-arduino (accessed 20th october 2019).
=================================================================

2
esphome/components/waveshare_epaper/waveshare_epaper.cpp
View File

@ -598,7 +598,7 @@ void WaveshareEPaper2P9InB::initialize() {
this->data(0x9F);
// COMMAND RESOLUTION SETTING
// set to 128x296 by COMMAND PANNEL SETTING
// set to 128x296 by COMMAND PANEL SETTING
// COMMAND VCOM AND DATA INTERVAL SETTING
// use defaults for white border and ESPHome image polarity

4
esphome/components/xiaomi_ble/xiaomi_ble.cpp
View File

@ -344,9 +344,9 @@ bool report_xiaomi_results(const optional<XiaomiParseResult> &result, const std:
bool XiaomiListener::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
// Previously the message was parsed twice per packet, once by XiaomiListener::parse_device()
// and then again by the respective device class's parse_device() function. Parsing the header
// here and then for each device seems to be unneccessary and complicates the duplicate packet filtering.
// here and then for each device seems to be unnecessary and complicates the duplicate packet filtering.
// Hence I disabled the call to parse_xiaomi_header() here and the message parsing is done entirely
// in the respecive device instance. The XiaomiListener class is defined in __init__.py and I was not
// in the respective device instance. The XiaomiListener class is defined in __init__.py and I was not
// able to remove it entirely.
return false; // with true it's not showing device scans

2
esphome/components/xiaomi_miscale/xiaomi_miscale.cpp
View File

@ -51,7 +51,7 @@ optional<ParseResult> XiaomiMiscale::parse_header(const esp32_ble_tracker::Servi
}
bool XiaomiMiscale::parse_message(const std::vector<uint8_t> &message, ParseResult &result) {
// exemple 1d18 a2 6036 e307 07 11 0f1f11
// example 1d18 a2 6036 e307 07 11 0f1f11
// 1-2 Weight (MISCALE 181D)
// 3-4 Years (MISCALE 181D)
// 5 month (MISCALE 181D)

2
esphome/core/component.h
View File

@ -22,7 +22,7 @@ extern const float IO;
extern const float HARDWARE;
/// For components that import data from directly connected sensors like DHT.
extern const float DATA;
/// Alias for DATA (here for compatability reasons)
/// Alias for DATA (here for compatibility reasons)
extern const float HARDWARE_LATE;
/// For components that use data from sensors like displays
extern const float PROCESSOR;

4
script/build_jsonschema.py
View File

@ -419,7 +419,7 @@ def get_jschema(path, vschema, create_return_ref=True):
def get_schema_str(vschema):
# Hack on cs.use_id, in the future this can be improved by trackign which type is required by
# Hack on cs.use_id, in the future this can be improved by tracking which type is required by
# the id, this information can be added somehow to schema (not supported by jsonschema) and
# completion can be improved listing valid ids only Meanwhile it's a problem because it makes
# all partial schemas with cv.use_id different, e.g. i2c
@ -675,7 +675,7 @@ def dump_schema():
# The root directory of the repo
root = Path(__file__).parent.parent
# Fake some diretory so that get_component works
# Fake some directory so that get_component works
CORE.config_path = str(root)
file_path = args.output