diff --git a/esphome/config_validation.py b/esphome/config_validation.py index 469b7031f6..f0bbc368b8 100644 --- a/esphome/config_validation.py +++ b/esphome/config_validation.py @@ -211,6 +211,9 @@ RESERVED_IDS = [ "open", "setup", "loop", + "uart0", + "uart1", + "uart2", ] diff --git a/tests/test1.yaml b/tests/test1.yaml index 0ff8b60ea2..5be6395729 100644 --- a/tests/test1.yaml +++ b/tests/test1.yaml @@ -161,13 +161,13 @@ mqtt: id: ${roomname}_lights relative_brightness: 5% - uart.write: - id: uart0 + id: uart_0 data: Hello World - uart.write: - id: uart0 + id: uart_0 data: [0x00, 0x20, 0x30] - uart.write: - id: uart0 + id: uart_0 data: !lambda |- return {}; on_connect: @@ -199,7 +199,7 @@ uart: number: GPIO23 inverted: true baud_rate: 115200 - id: uart0 + id: uart_0 parity: NONE data_bits: 8 stop_bits: 1 @@ -790,7 +790,7 @@ sensor: reference_resistance: 430 Ω rtd_nominal_resistance: 100 Ω - platform: mhz19 - uart_id: uart0 + uart_id: uart_0 co2: name: MH-Z19 CO2 Value temperature: @@ -930,7 +930,7 @@ sensor: name: Pulse Width pin: GPIO12 - platform: sm300d2 - uart_id: uart0 + uart_id: uart_0 co2: name: SM300D2 CO2 Value formaldehyde: @@ -1122,7 +1122,7 @@ sensor: root["key"] = id(the_sensor).state; root["greeting"] = "Hello World"; - platform: sds011 - uart_id: uart0 + uart_id: uart_0 pm_2_5: name: SDS011 PM2.5 pm_10_0: @@ -2094,7 +2094,7 @@ climate: on_state: logger.log: State changed! id: midea_unit - uart_id: uart0 + uart_id: uart_0 name: Midea Climate transmitter_id: period: 1s @@ -2419,15 +2419,15 @@ switch: id: my_switch state: !lambda "return false;" - platform: uart - uart_id: uart0 + uart_id: uart_0 name: UART String Output data: DataToSend - platform: uart - uart_id: uart0 + uart_id: uart_0 name: UART Bytes Output data: [0xDE, 0xAD, 0xBE, 0xEF] - platform: uart - uart_id: uart0 + uart_id: uart_0 name: UART Recurring Output data: [0xDE, 0xAD, 0xBE, 0xEF] send_every: 1s @@ -2775,7 +2775,7 @@ pn532_i2c: i2c_id: i2c_bus rdm6300: - uart_id: uart0 + uart_id: uart_0 rc522_spi: cs_pin: GPIO23 @@ -2804,7 +2804,7 @@ mcp4728: i2c_id: i2c_bus gps: - uart_id: uart0 + uart_id: uart_0 time: - platform: sntp @@ -3124,7 +3124,7 @@ canbus: teleinfo: id: myteleinfo - uart_id: uart0 + uart_id: uart_0 update_interval: 60s historical_mode: true diff --git a/tests/test3.yaml b/tests/test3.yaml index 38ae099fd6..ceb9047d17 100644 --- a/tests/test3.yaml +++ b/tests/test3.yaml @@ -216,37 +216,37 @@ wifi: password: "password1" uart: - - id: uart1 + - id: uart_1 tx_pin: number: GPIO1 inverted: true rx_pin: GPIO3 baud_rate: 115200 - - id: uart2 + - id: uart_2 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart3 + - id: uart_3 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 4800 - - id: uart4 + - id: uart_4 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart5 + - id: uart_5 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart6 + - id: uart_6 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart7 + - id: uart_7 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 38400 - - id: uart8 + - id: uart_8 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 4800 @@ -254,28 +254,28 @@ uart: stop_bits: 2 # Specifically added for testing debug with no options at all. debug: - - id: uart9 + - id: uart_9 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart10 + - id: uart_10 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart11 + - id: uart_11 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 - - id: uart12 + - id: uart_12 tx_pin: GPIO4 rx_pin: GPIO5 baud_rate: 9600 modbus: - uart_id: uart1 + uart_id: uart_1 vbus: - uart_id: uart4 + uart_id: uart_4 ota: safe_mode: true @@ -337,14 +337,14 @@ sensor: - platform: hydreon_rgxx model: RG 9 - uart_id: uart6 + uart_id: uart_6 id: hydreon_rg9 moisture: name: hydreon_rain id: hydreon_rain - platform: hydreon_rgxx model: RG_15 - uart_id: uart6 + uart_id: uart_6 acc: name: hydreon_acc event_acc: @@ -369,7 +369,7 @@ sensor: value: 100.0 - platform: bl0939 - uart_id: uart8 + uart_id: uart_8 voltage: name: BL0939 Voltage current_1: @@ -387,7 +387,7 @@ sensor: energy_total: name: BL0939 Total energy - platform: bl0940 - uart_id: uart3 + uart_id: uart_3 voltage: name: BL0940 Voltage current: @@ -401,7 +401,7 @@ sensor: external_temperature: name: BL0940 External temperature - platform: bl0942 - uart_id: uart3 + uart_id: uart_3 voltage: name: BL0942 Voltage current: @@ -413,7 +413,7 @@ sensor: frequency: name: BL0942 Frequency - platform: pzem004t - uart_id: uart3 + uart_id: uart_3 voltage: name: PZEM004T Voltage current: @@ -446,7 +446,7 @@ sensor: name: PZEMDC Energy - platform: pmsx003 - uart_id: uart9 + uart_id: uart_9 type: PMSX003 pm_1_0: name: PM 1.0 Concentration @@ -474,7 +474,7 @@ sensor: name: Particulate Count >10.0um update_interval: 30s - platform: pmsx003 - uart_id: uart5 + uart_id: uart_5 type: PMS5003T pm_1_0: name: PM 1.0 Concentration @@ -501,7 +501,7 @@ sensor: humidity: name: PMS Humidity - platform: pmsx003 - uart_id: uart6 + uart_id: uart_6 type: PMS5003ST pm_1_0: name: PM 1.0 Concentration @@ -534,7 +534,7 @@ sensor: formaldehyde: name: PMS Formaldehyde Concentration - platform: cse7761 - uart_id: uart7 + uart_id: uart_7 voltage: name: CSE7761 Voltage current_1: @@ -546,7 +546,7 @@ sensor: active_power_2: name: CSE7761 Active Power 2 - platform: cse7766 - uart_id: uart3 + uart_id: uart_3 voltage: name: CSE7766 Voltage current: @@ -637,7 +637,7 @@ sensor: component_id: 2 wave_channel_id: 1 - platform: smt100 - uart_id: uart10 + uart_id: uart_10 counts: name: Counts dielectric_constant: @@ -925,7 +925,7 @@ climate: - horizontal - both update_interval: 10s - uart_id: uart12 + uart_id: uart_12 sprinkler: - id: yard_sprinkler_ctrlr @@ -996,7 +996,7 @@ light: effects: - wled: - adalight: - uart_id: uart3 + uart_id: uart_3 - e131: universe: 1 - platform: hbridge @@ -1004,7 +1004,7 @@ light: pin_a: out pin_b: out2 - platform: sonoff_d1 - uart_id: uart2 + uart_id: uart_2 use_rm433_remote: false name: Sonoff D1 Dimmer id: d1_light @@ -1019,10 +1019,10 @@ light: name: "Shelly Dimmer Current" max_brightness: 500 firmware: "51.6" - uart_id: uart11 + uart_id: uart_11 sim800l: - uart_id: uart4 + uart_id: uart_4 on_sms_received: - lambda: |- std::string str; @@ -1035,7 +1035,7 @@ sim800l: recipient: "+1234" dfplayer: - uart_id: uart5 + uart_id: uart_5 on_finished_playback: then: if: @@ -1049,7 +1049,7 @@ tm1651: dio_pin: D5 rf_bridge: - uart_id: uart5 + uart_id: uart_5 on_code_received: - lambda: |- uint32_t test; @@ -1083,7 +1083,7 @@ rf_bridge: display: - platform: nextion - uart_id: uart1 + uart_id: uart_1 tft_url: http://esphome.io/default35.tft update_interval: 5s on_sleep: @@ -1128,11 +1128,11 @@ fingerprint_grow: event: esphome.${device_name}_fingerprint_grow_enrollment_failed data: finger_id: !lambda "return finger_id;" - uart_id: uart6 + uart_id: uart_6 dsmr: decryption_key: 00112233445566778899aabbccddeeff - uart_id: uart6 + uart_id: uart_6 max_telegram_length: 1000 request_pin: D5 request_interval: 20s @@ -1140,7 +1140,7 @@ dsmr: daly_bms: update_interval: 20s - uart_id: uart1 + uart_id: uart_1 qr_code: - id: homepage_qr diff --git a/tests/test5.yaml b/tests/test5.yaml index bb55887d75..0d044ac241 100644 --- a/tests/test5.yaml +++ b/tests/test5.yaml @@ -29,11 +29,11 @@ ota: logger: uart: - - id: uart1 + - id: uart_1 tx_pin: 1 rx_pin: 3 baud_rate: 9600 - - id: uart2 + - id: uart_2 tx_pin: 17 rx_pin: 16 baud_rate: 19200 @@ -42,7 +42,7 @@ i2c: frequency: 100khz modbus: - uart_id: uart1 + uart_id: uart_1 flow_control_pin: 5 id: mod_bus1 @@ -67,7 +67,7 @@ mqtt: # yamllint enable rule:line-length vbus: - - uart_id: uart2 + - uart_id: uart_2 binary_sensor: - platform: gpio @@ -422,7 +422,7 @@ sensor: value_type: U_WORD - platform: t6615 - uart_id: uart2 + uart_id: uart_2 co2: name: CO2 Sensor