Stephen Tierney
b20760c93c
Add support for LTR390 ( #1505 )
...
* Add support for ltr390
* Fix linting errors
* Fix more linting errors
* Linting fixes continued
* Linting forever
* Another one
* Fix regression and linting
* Fix narrowing conversion
* Add test and bugfix
* Add codeowners
* Update CODEOWNERS
* Update sensor defs
* Reformatted with black
* Fixed device class import
* Update CODEOWNERS
* Update CODEOWNERS
* Adding all config options
As requested https://github.com/esphome/esphome/pull/1505#discussion_r597326897
* Moving test to different config file
test1.yml runs out of memory
* Update according to comments
* Add safety clause to reading modes
* Fix clang-tidy complaint
* Revert change to i2c component
* Fix for changes in dev
* Revert "Revert change to i2c component"
This reverts commit 2810df59e9
2021-09-22 13:24:19 +02:00
Jesse Hills
654e31124e
Correctly invert the float output state ( #2368 )
2021-09-22 22:59:03 +12:00
Stanislav Meduna
8e36e1b92e
ili9341: use larger SPI transfers ( #1628 )
...
The original version uses write_byte to tranfer every byte of
the display buffer which is quite extensive as every byte needs
to be waited for in the SPI driver.
This patch prepares transfers in 64-byte chunks. The result is
a visible faster redraw of the display.
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 12:43:17 +02:00
Tommy van der Vorst
9fe7b08874
Add support for Waveshare 7.5 inch (C) bichromatic display (black-and-white only for now) ( #1844 )
...
* Add support for Waveshare 7.5 inch (B) bichromatic display (black-and-white only for now)
* Use drawing commands specific to bichromatic displays
* Fix inaccurate comment
* Fix merge error
* Formatting
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:39:41 +02:00
Robert Resch
f1364d4af4
Combine code of xiaomi_miscale and xiaomi_miscale2 ( #2266 )
...
* Combine xiaomi_miscale and xiaomi_miscale2
* check if message contains impedance
* auto detect scale version
* remove xiaomi_miscale2
* fix lint errors
* Apply suggestions from code review
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Apply suggestions from code review on old code
* Fix clang-tidy warnings
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:12:55 +02:00
Silvio
ed593544d8
Add support for Daly Smart BMS ( #2156 )
...
* Add support for Daly Smart BMS
* Fix clang-format and python lint
* Fix const declaration
* Add code owner
* Fix malloc with std::vector
* Fix with suggestions
* Revert "Fix with suggestions"
This reverts commit bc618f20cf
2021-09-22 12:03:42 +02:00
Niccolò Maggioni
0929a0f8aa
Discard senseair commands echoes & fix calibration result check ( #2358 )
2021-09-22 11:15:51 +02:00
Paul Monigatti
13b3412b45
Fix Dallas parent not being set ( #2369 )
2021-09-22 11:12:42 +02:00
Maurice Makaay
888e315553
Fix OTA crash during reading of new bin file. ( #2366 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-22 10:37:46 +02:00
Otto Winter
11daabc9c2
Fix docker pio settings not applied ( #2370 )
2021-09-22 10:32:39 +02:00
WeekendWarrior1
40e0100c1e
add = to default font glpyh list ( #2361 )
2021-09-22 16:57:16 +12:00
Paul Monigatti
c51352d04d
Allow non-addressable lights in light partitions ( #2256 )
2021-09-22 13:59:21 +12:00
Paul Monigatti
c8a8acd46e
Fix ESP8266 preference loading ( #2367 )
2021-09-22 13:55:49 +12:00
Otto Winter
bbac1534a3
Fix ESP8266 preferences not set up ( #2362 )
2021-09-21 21:59:11 +02:00
Oxan van Leeuwen
637b55bfbf
Allow compilation against IDF from repository ( #2355 )
...
* Fix src_filter in platformio.ini after src_dir change
* Add -Wno-nonnull-compare to platformio.ini as well
* Create default sdkconfig for static analysis
* Add more compiler flags to clang ignore list
* Clean-up platformio.ini
* Remove unnecessary blank line
* Fix accidentally dropped library
* Don't gitignore sdkconfig.defaults
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-21 17:12:17 +02:00
Maurice Makaay
92a24d52be
Fix OTA password mismatch error. ( #2363 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-21 17:11:58 +02:00
Alex
491f8cc611
Configurable Flash Write Interval ( #2119 )
...
Co-authored-by: Alex <33379584+alexyao2015@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-21 13:47:51 +02:00
Oxan van Leeuwen
71fc61117b
Fix duplicate defines and restore alphabetical order ( #2352 )
2021-09-21 16:52:01 +12:00
Otto Winter
24f445dade
Fix src_filter in platformio.ini after src_dir change ( #2353 )
2021-09-21 16:37:13 +12:00
Otto Winter
7c884329eb
Fix MDNS not registered ( #2359 )
2021-09-21 16:34:56 +12:00
Martin
bac58bba4d
fixes compilation error in rtttl ( #2357 )
...
Compilation error for millis() and delay() after #2303
2021-09-20 22:13:46 +02:00
Otto Winter
250bf3f054
CI cache only restore from direct matches ( #2351 )
2021-09-20 13:14:05 +02:00
Otto Winter
e65a7d887f
Bump aioesphomeapi to 9.1.1 ( #2350 )
2021-09-20 12:02:37 +02:00
Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Oxan van Leeuwen
1e8e471dec
Introduce call_dump_config() indirection ( #2325 )
2021-09-20 11:16:31 +02:00
Otto Winter
2d7f8b3bdf
Install python requirements after apt ones for better caching ( #2349 )
...
* Install python requirements after apt ones for better caching
* Fix buildkit caching works differently
2021-09-20 10:31:48 +02:00
Oxan van Leeuwen
7452ef23b1
Add ESPHOME_VERSION_CODE define ( #2324 )
2021-09-20 20:16:59 +12:00
Christian Taedcke
9ebe075f9b
Add deep sleep wakeup from touch ( #1238 ) ( #2281 )
2021-09-20 20:12:32 +12:00
Aljaž Srebrnič
3052c64dd7
Add invert_colors option for st7735 ( #2327 )
2021-09-20 20:08:08 +12:00
Otto Winter
5e345783bd
Fix docker release deploy push flag ( #2348 )
2021-09-20 09:55:18 +02:00
poptix
81685573e1
Properly calculate negative temperatures in sm300d2 ( #2335 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-20 19:44:18 +12:00
synco
945ed5d3bd
Added graphing component ( #2109 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-20 19:29:47 +12:00
Otto Winter
fff5ba03c2
Also run docker CI when requirements change ( #2347 )
2021-09-20 09:29:09 +02:00
besteru
82eca13d7b
Fix error reporting for DHT bit read loop ( #2344 )
2021-09-20 09:14:44 +02:00
synco
5f21b925da
Calculating the AC only component of the samples ( #1906 )
...
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:12:50 +02:00
Otto Winter
272ceadbb0
Redo docker build system with buildkit+multi-stage and cache pio packages ( #2338 )
2021-09-20 09:07:38 +02:00
Jesse Hills
d26c2b1a44
Merge pull request #2346 from esphome/bump-2021.9.1
...
2021.9.1
2021-09-20 14:56:48 +12:00
Oxan van Leeuwen
8bda8e5393
Clean-up sensor integration ( #2275 )
2021-09-20 14:34:59 +12:00
Jesse Hills
954b8a0cff
Bump version to 2021.9.1
2021-09-20 14:16:57 +12:00
Otto Winter
7c17e72db4
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
d180aee57f
Apply color brightness to addressable light effects ( #2321 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
e3ffecefc0
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
4c61cf153c
Light transition fixes ( #2320 )
2021-09-20 14:16:56 +12:00
Paul Monigatti
c78fb90e2f
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-20 14:16:39 +12:00
Otto Winter
a990898256
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 10:33:10 +12:00
Luca Gugelmann
c60c618204
Fix SPIDevice::write_byte16 to actually take a 16 bit argument ( #2345 )
2021-09-20 09:19:20 +12:00
Stefan Rado
53bd197c44
Add eco mode to tuya climate component ( #1860 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:17:43 +12:00
dependabot[bot]
dbb195691b
Bump pylint from 2.10.2 to 2.11.1 ( #2334 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-19 19:22:28 +02:00
Oxan van Leeuwen
50da630811
Apply color brightness to addressable light effects ( #2321 )
2021-09-19 18:46:26 +02:00
Kamil Trzciński
30eca885c9
Add esp8266_disable_ssl_support: config option ( #2236 )
2021-09-19 18:46:17 +02:00
