Commit Graph

259 Commits

Author SHA1 Message Date
Jesse Hills
3b486084c8
Add resistance_sampler interface for config validation (#5718) 2023-11-13 10:23:27 +13:00
Angel Nunez Mencias
defe8ac97b
Add spi support for ade7953 (#5439)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-11-07 13:17:29 +13:00
Greg Cormier
972c18a7ca
Add differential pressure sensor support for CFSensor XGZP68xxD devices (#5562)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-11-07 12:46:30 +13:00
Rodrigo Martín
d5aeb32ca6
feat: Add ESP32 BLE enable/disable automations (#5616)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-11-06 15:54:39 +13:00
Joris S
13994d9bd1
Add Micronova component (#4760)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Graham Brown <grahambrown11@gmail.com>
2023-11-03 19:54:47 +13:00
Mike La Spina
22cdb8dfc3
Add HLK-LD2420 mmWave Radar module component (#4847)
Co-authored-by: descipher <120155735+GelidusResearch@users.noreply.github.com>
2023-11-02 18:02:23 -05:00
Clyde Stubbs
1fd9d67e2b
Add support for PCA9535 16 bit I/O expander (#5634) 2023-11-01 12:22:04 +13:00
niklasweber
907d43827c
Add dfrobot_sen0395 mmwave radar component (#4203)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-27 17:56:33 +13:00
kahrendt
841b24f744
Add support for Qwiic PIR binary sensor (#5194) 2023-10-26 08:29:21 +13:00
Eduard Llull
28aedae8d7
Add Emc2101 (#4491)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-26 07:30:11 +13:00
jpfaff
2895cc6c57
Add support for honeywellabp2 pressure sensor (#5422) 2023-10-26 07:28:07 +13:00
Daniel Dunn
e80bd8ed3d
Add text component (#5336)
Co-authored-by: Maurits <maurits@vloop.nl>
Co-authored-by: mauritskorse <mauritskorse@gmail.com>
Co-authored-by: Daniel Dunn <dannydunn@eternityforest.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-25 22:00:32 +13:00
Alejandro Galfrascoli
e01ba894ed
Add IR Noblex climate component (#4913)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-24 16:28:53 +13:00
Jevgeni Kiski
34dce0acbf
AMS iAQ Core CO2 sensor component (#5192)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-24 12:35:51 +13:00
Piu Piuson
96822aaa3a
Feat: Add GREE climateir component (#4464)
Co-authored-by: orestismers <33354671+orestismers@users.noreply.github.com>
Co-authored-by: Orestes Mersinias <orestis.mers@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-24 11:34:46 +13:00
Chris Feenstra
b4765fb5fb
Add ZH/LT-01 climate component with IR receiver option (#4333)
Co-authored-by: Chris Feenstra <chris@cfeenstra.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-24 11:33:47 +13:00
Trent Houliston
d82471942f
Publish the pulse_meter total when setting the total (#5475) 2023-10-19 14:28:05 -07:00
Samuel Sieb
6839de69c1
add uart button (#5540)
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-10-18 07:30:32 +13:00
ghsensdev
6143099f60
Add Support for Sensirion SFA30 sensor (#5519)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-10-16 07:49:57 +13:00
Adam Goode
af62c2d9cf
Implement sensor component for MMC5983 (#5361) 2023-10-09 10:26:58 +13:00
Clyde Stubbs
507dc5f496
SPI fixes for buggy components (#5446) 2023-09-29 00:36:31 +00:00
Clyde Stubbs
5360e14a9c
Fix #4896 and #4903 (#5433) 2023-09-27 12:25:14 +13:00
Lubos Horacek
b107948c47
Wireguard component (#4256)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Simone Rossetto <simros85@gmail.com>
Co-authored-by: Thomas Bernard <thomas0bernard@gmail.com>
2023-09-12 07:13:24 +12:00
Clyde Stubbs
d2648657fb
Native SPI RGB LED component (#5288)
* Add testing branch to workflow

* Add workflow

* Checkpoint

* Align SPI data rates in c++ code with Python code.

* Checkpoint

* CI fixes

* Update codeowners

* Workflow cleanup

* Rename to spi_rgb_led

* Rename header file

* Clang tidy

* Disable spi after transfer.

* Move enable() to where it belongs

* Call spi_setup before enable

* Clang tidy

* Add test

* Rename to spi_led_strip

* Include 'defines.h'

* Fix CODEOWNERS

* Migrate data rate to new style setting.

* Remove defines.h

* Fix class name

* Fix name in .py

* And more more name tidy up.

---------

Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-09-10 21:20:06 -05:00
Flaviu Tamas
e66047e072
Add BMI160 support (#5143)
* Add BMI160 support

* BMI160: use set_timeout for delay

* Add support for old compilers

Fix "warning: missing terminating ' character"

* Increase power-on delay to be more conservative

* Add helper for reading little-endian data over i2c

* Replace configuration names with globals

Note: for testing with external components, you will need to comment out the import & define your own CONF_GYROSCOPE_X, etc, in this file

* Improve icons

* Fix tests & lint
2023-09-09 21:25:09 -05:00
Clyde Stubbs
5c26f95a4b
Refactor SPI code; Add ESP-IDF hardware support (#5311)
* Checkpoint

* Checkpoint

* Checkpoint

* Revert hal change

* Checkpoint

* Checkpoint

* Checkpoint

* Checkpoint

* ESP-IDF working

* clang-format

* use bus_list

* Add spi_device; fix 16 bit transfer.

* Enable multi_conf;
Fix LSB 16 bit transactions

* Formatting fixes

* Clang-format, codeowners

* Add test

* Formatting

* clang tidy

* clang-format

* clang-tidy

* clang-format

* Checkpoint

* Checkpoint

* Checkpoint

* Revert hal change

* Checkpoint

* Checkpoint

* Checkpoint

* Checkpoint

* ESP-IDF working

* clang-format

* use bus_list

* Add spi_device; fix 16 bit transfer.

* Enable multi_conf;
Fix LSB 16 bit transactions

* Formatting fixes

* Clang-format, codeowners

* Add test

* Formatting

* clang tidy

* clang-format

* clang-tidy

* clang-format

* Clang-tidy

* Clang-format

* clang-tidy

* clang-tidy

* Fix ESP8266

* RP2040

* RP2040

* Avoid use of spi1 as id

* Refactor SPI code.
Add support for ESP-IDF hardware SPI

* Force SW only for RP2040

* Break up large transfers

* Add interface: option for spi.
validate pins in python.

* Can't use match/case with Python 3.9.
Check for inverted pins.

* Work around target_platform issue with

* Remove debug code

* Optimize write_array16

* Show errors in hex

* Only one spi on ESP32Cx variants

* Ensure bus is claimed before asserting /CS.

* Check on init/deinit

* Allow maximum rate write only SPI on GPIO MUXed pins.

* Clang-format

* Clang-tidy

* Fix issue with reads.

* Finger trouble...

* Make comment about missing SPI on Cx variants

* Pacify CI clang-format. Did not complain locally??

* Restore 8266 to its former SPI glory

* Fix per clang-format

* Move validation and choice of SPI into Python code.

* Add test for interface: config

* Fix issues found on self-review.

---------

Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-09-08 02:27:19 -05:00
Christian
76ebbfefd2
Integration LightwaveRF switches (#4812)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-09-06 10:33:49 +12:00
JJ
74ab940aff
Adding DFRobot Ozone Sensor Support (sen0321) (#4782) 2023-09-06 10:09:22 +12:00
Kuba Szczodrzyński
a9630ac847
Support for LibreTiny platform (RTL8710, BK7231 & other modules) (#3509)
Co-authored-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Co-authored-by: Sam Neirinck <git@samneirinck.com>
Co-authored-by: David Buezas <dbuezas@users.noreply.github.com>
Co-authored-by: Stroe Andrei Catalin <catalin2402@gmail.com>
Co-authored-by: Sam Neirinck <github@samneirinck.be>
Co-authored-by: Péter Sárközi <xmisterhu@gmail.com>
Co-authored-by: Hajo Noerenberg <hn@users.noreply.github.com>
2023-09-05 10:16:08 +12:00
Clyde Stubbs
164d05fdce
Add manufacturer data config to BLE server (#5251) 2023-08-18 08:05:25 +12:00
SeByDocKy
c11c4dad2f
Add pmwcs3 capacitive soil moisture & temperature sensor component (#4624)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-18 08:03:39 +12:00
Regev Brody
5cb5594288
Add configuration flow abilites to the ld2410 component (#4434) 2023-08-16 11:31:18 +12:00
MrEditor97
3b2c61e813
Updated my username in Code Owners (#5247) 2023-08-15 07:12:03 +12:00
Greg Cormier
0ed0bdc655
New PM sensor Panasonic SN-GCJA5 (#4988) 2023-08-10 17:04:22 +12:00
kahrendt
a8fa4b56f9
New component: Add support for bmp581 pressure and temperature sensors (#4657) 2023-08-08 17:05:08 +12:00
André Cirne
1495fada90
Add support for a01nyub (#4863)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-07 12:22:18 +12:00
Sergey Dudanov
a539197bc4
New 'Duty Time' sensor component (#5069) 2023-07-13 08:48:16 +12:00
Christian
119bbba254
Grove amend name (#5093) 2023-07-13 08:13:50 +12:00
danieltwagner
8c5978599a
Add support for ATM90E26 (#4366)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 17:10:22 +12:00
Christian
e0fd8cd850
Add support for Grove tb6612 fng (#4797)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 15:02:53 +12:00
Kevin P. Fleming
cf65bd8ad7
airthings_wave: Battery level reporting (#4979) 2023-07-12 13:38:52 +12:00
Stefan Rado
5f531ac9b0
Add TT21100 touchscreen component (#4793)
Co-authored-by: Rajan Patel <rpatel3001@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 13:19:19 +12:00
dentra
7a551081ee
web server esp idf suppport (#3500)
* initial web_server_idf implementation

* initial web_server_idf implementation

* fix lint errors

* fix lint errors

* add captive_portal support

* fix lint errors

* fix lint errors

* add url decode

* Increase the max supported size of headers section in HTTP request

* add ota support

* add mulipart form data support (ota required)

* make linter happy

* make linter happy

* make linter happy

* fix review marks

* add DefaultHeaders support

* add DefaultHeaders support

* unify file names

* using std::isnan

* parse multipart requests only when ota enabled

* parse multipart requests only when ota enabled

* parse multipart requests only when ota enabled

* parse multipart requests only when ota enabled

* parse multipart requests only when ota enabled

* drop multipart request support

* drop multipart request support

* drop multipart request support

* OTA is disabled by default

* fail when OTA enabled on IDF framework

* changing file permissions to remove execute bit

* return back PGM_P and strncpy_P macro

* temp web_server fix to be compat with 2022.12

* fix config handling w/o web_server

* fix compilation with "local"

* fully remove all idf ota

* merge with esphome 2023.6

* add core/hal to web_server_base

* Update esphome/components/web_server_base/__init__.py

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

* Update __init__.py

* Update __init__.py

---------

Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-11 19:08:03 -05:00
KoenBreeman
74139985c9
RTC implementation of pcf8563 (#4998)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 09:19:28 +12:00
jan-hofmeier
f3cdcc008a
Add Alpha3 pump component (#3787)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-11 17:12:43 +12:00
kahrendt
a391815921
Add Zio Ultrasonic Distance Sensor Component (#5059) 2023-07-11 16:24:18 +12:00
Kevin P. Fleming
8bd9f50659
airthings_wave: refactor to eliminate code duplication (#4910) 2023-06-21 11:53:44 +12:00
MrEditor97
41a618737b
XL9535 I/O Expander (#4899)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-19 15:26:06 +12:00
Pavlo Dudnytskyi
5a8e93ed0a
Upgraded Haier climate component implementation (#4521)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Pavlo Dudnytskyi <pdudnytskyi@astrata.eu>
Co-authored-by: esphomebot <esphome@nabucasa.com>
2023-06-19 10:24:52 +12:00
Graham Brown
54474e5b33
Add Alarm Control Panel (#4770)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-15 12:34:39 +12:00