Andreas Soehlke
27364ee72c
Add cd74hc4067 multiplexer ( #2431 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: asoehlke <git@soehlke.de>
2022-01-11 16:59:57 +13:00
Chris Nussbaum
a0ea2aae6e
Add an action for pzemac to reset the total energy ( #2480 )
2022-01-10 23:13:39 +13:00
rsumner
a4431abea8
MCP3204 4-channel 12-bit ADC component ( #2895 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 12:04:48 +13:00
Sergey Dudanov
9a70bfa471
New Midea IR component, improvements and fixes ( #2847 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 11:47:19 +13:00
Valentin Ochs
b406c6403c
Create new kalman_combinator component ( #2965 )
2022-01-09 23:44:36 +01:00
Jesse Hills
ea1be8e7bf
Add MCP47A1 DAC output ( #3014 )
2022-01-08 21:35:55 +13:00
Martin
5e1e543b06
Add support for BMP388 / BMP 390 pressure and temperature sensor ( #2716 )
2022-01-06 15:01:50 +13:00
Snōwball
c855bc31b4
Add bl0940 component used by e.g. tuya devices ( #1904 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:38:58 +01:00
Jesse Hills
33f17f75a0
Upgrade ArduinoJson to 6.18.5 and migrate code ( #2844 )
2022-01-01 22:31:43 +13:00
MrEditor97
23edb18d7e
INA260 Current and Power Sensor support ( #2788 )
2021-12-31 22:08:49 +13:00
jsuanet
f431c7402f
Add shutdown and safe_mode button ( #2918 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-12-20 22:25:36 +01:00
Jonas De Kegel
542fb2175b
Support inverted tm1637 display ( #2878 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-20 09:30:35 +01:00
Frank Langtind
6ec9cfb044
Add Tuya Number support ( #2765 )
2021-12-20 14:35:10 +13:00
Petr Vraník
5d70ff702b
quantile filter support ( #2900 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: pvranik <petr.vranik@mgm-tp.com>
2021-12-15 07:43:42 +13:00
Ben Owen
cec4a81e14
Add reset_duration option for waveshare epaper HAT rev 2.1 ( #1481 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-13 10:27:11 +13:00
Jesse Hills
3d51ac8df0
Use new platform component config blocks for wizard ( #2885 )
2021-12-08 09:22:03 +13:00
Yuval Brik
2253d4bc16
Support different run duration for non-timer wakeup ( #2861 )
2021-12-06 23:30:27 +01:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
Paul Monigatti
05fe5db030
Relax the icon validator to allow non-mdi icons ( #2764 )
2021-11-23 09:21:14 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
d8e33c5a69
Add repeat action for automations ( #2538 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:30:07 +13:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Kamil Trzciński
fb57ab0add
Add esp32_camera_web_server: to expose mjpg/jpg images ( #2237 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-10 13:10:07 +13:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Sean Brogan
2147bcbc29
Remove autoload of xiaomi_ble and ruuvi_ble ( #2617 )
2021-10-28 09:16:12 +13:00
Oxan van Leeuwen
f7b3f52731
Limit hostnames to 31 characters ( #2531 )
2021-10-22 12:09:47 +02:00
Oxan van Leeuwen
c0fc5b48ae
Fix pin/component switchup in SX1509 pin configuration ( #2593 )
2021-10-21 19:55:19 +02:00
Otto Winter
7f34561e53
Fix ESP8266 GPIO0 Pullup Validation ( #2572 )
2021-10-21 12:23:37 +02:00
Paul Monigatti
1308236429
Revert "Added test for bme680_bsec" ( #2518 )
...
This reverts commit 7f6a50d291
2021-10-14 12:31:52 +02:00
Paul Monigatti
07b309e65d
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-14 20:58:35 +13:00
razorback16
534ce11d54
TCS34725 BugFix and GA factor ( #2445 )
...
- Fixed endianness bug on tcs34725 data read
- Fixed lux adjustments based on gain, integration time and GA factor
- Added glass attenuation factor to allow using this sensor behind
semi transparent glass
Co-authored-by: Razorback16 <razorback16@users.noreply.github.com>
2021-10-13 18:45:41 +02:00
Sergio Mayoral Martínez
3dee057826
Add throttle_average sensor filter ( #2485 )
2021-10-13 11:35:30 +13:00
Jesse Hills
34db9d9ef2
Add optional timeout for wait_until action ( #2282 )
2021-10-13 08:23:24 +13:00
Oxan van Leeuwen
1184bbc976
Reduce IRAM usage in test3 ( #2499 )
2021-10-13 08:22:38 +13:00
Rob Deutsch
a3eb2a7ee0
Added heatpumpir support ( #1343 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-13 07:38:19 +13:00
Chris Nussbaum
b4f57972fb
Add on_open and on_closed triggers to cover ( #2488 )
2021-10-12 15:39:21 +13:00
definitio
42739f0b22
Add configuration for climate topics ( #2473 )
2021-10-10 17:55:22 +02:00
definitio
a1f9b0d7f2
Add configuration for cover topics ( #2472 )
2021-10-10 17:54:07 +02:00
Paul Monigatti
471b82f727
EntityBase Refactor ( #2418 )
...
* Renamed Nameable to EntityBase (cpp)
* Renamed NAMEABLE_SCHEMA to ENTITY_BASE_SCHEMA (Python)
* Renamed cg.Nameable to cg.EntityBase (Python)
* Remove redundant use of CONF_NAME from esp32_touch
* Remove redundant use of CONF_NAME from mcp3008
* Updated test
* Moved EntityBase from Component.h and Component.cpp
* Added icon property to EntityBase
* Added CONF_ICON to ENTITY_BASE_SCHEMA and added setup_entity function to cpp_helpers
* Added MQTT component getters for icon and disabled_by_default
* Lint
* Removed icon field from MQTT components
* Code generation now uses setup_entity to setENTITY_BASE_SCHEMA fields
* Removed unused import
* Added cstdint include
* Optimisation: don't set icon if it is empty
* Remove icon from NumberTraits and SelectTraits
* Removed unused import
* Integration and Total Daily Energy sensors now inherit icons from their parents during code generation
* Minor comment correction
* Removed redundant icon-handling code from sensor, switch, and text_sensor
* Update esphome/components/tsl2591/tsl2591.h
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Added icon property to binary sensor, climate, cover, and fan component tests
* Added icons for Binary Sensor, Climate, Cover, Fan, and Light to API
* Consolidated EntityBase fields in MQTT components
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-10 10:37:05 +02:00
Paul Monigatti
955c96731e
Add Safe Mode Restart Switch ( #2437 )
2021-10-06 20:44:48 +13:00
NMC
877367677b
Add support for Airthing Wave Mini ( #2440 )
2021-10-05 11:56:34 +13:00
Maurice Makaay
c89018a431
Option to ignore CRC for EFuse MAC address ( #2399 )
...
* Accept changes as proposed by black.
* Added test and implemented optional correctly.
* Disable PHY RF full calibration (because it calls the breaking MAC retrieval function).
* Disable CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE instead of enable, dummy!
* Rename CONF_IGNORE_EFUSE_MAC_CRC to CONF_ESP32_IGNORE_EFUSE_MAC_CRC.
* Removed unused import.
* Fix ordering of constants.
* Moved all MAC address logic to core helpers.
* Use pretty MAC address for the log.
* Use standard MAC formatter function for debug component.
* Fix clang-formatting.
* Fix clang-formatting.
* Brought wording of comments in line with other function-describing comments.
* Processed code review by @OttoWinter
* Add USE_ESP32_IGNORE_EFUSE_MAC_CRC to defines.h
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-30 18:08:15 +02:00
Marek Marczykowski-Górecki
c26ea7e4e0
Tuya: add cover component ( #2279 )
2021-09-29 10:02:13 +13:00
Stephen Tierney
af04f565cf
Add support for SCD4X ( #2217 )
...
* Initial commit
* clang-format fixes
* Update CODEOWNERS
* clang-format fixes
* Fix merge error
* Fix missing return
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-28 22:10:25 +02:00
Daniel Müller
2eb5f89d82
Add cover toggle support ( #1809 )
...
* Add cover toggle support
Step through open/stop/close/stop sequence with every toggle
* Move the cover toggle logic to perform()
* Add clang-tidy CI suggestion
* Implement cover toggle action as cover trait
* Handle toggle correctly if cover fully closed on POR
* Fix CI finding
* Add deprecated warning
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Mueller, Daniel <daniel.mueller@karlstorz.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:31:15 +02:00
Marcos Pérez Ferro
e30f17f64f
Add Current based cover ( #1439 )
...
* Adding first version of current_base cover. No Interlock yet.
* simplifying code
* Implementing malfunction protection
* Adding test
* Fixing too long lines
* Fixing test sensor names
* Adding missing id's in ade7953 tests
* Adding code owners as requested
* Fixing issue setting position when stop reached
* Fixing issue setting position when stop reached
* Black formatting
* Fixing format issues
* Fix for concurrent changes
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:22:45 +02:00
Martin
7672ba2c8d
Modbus controller ( #1779 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-27 09:27:24 +13:00
rbaron
95a6715b2b
Adds light sensor support for b-parasites ( #2391 )
2021-09-25 13:16:27 +02:00
ZJY
66761ff340
Add SSD1305 support to SSD1306 integration along with few new options ( #1902 )
...
* Add serveral options for SSD1306 integration
* Add SSD1305 support
(SSD1305 is similar to SSD1306, it seems SSD1305 has
brightness and color register but does not have charge pump)
* Add some description when manipulating registers
* Add flip, offset and invert option to get more compatibility
with various display modules
* Fix typo `setup_ssd1036' -> `setup_ssd1306'
* Add SSD1306 brightness validation tip
* Add more description, limit offset range
* Changes according to linter
* Fix test
* Raise error instead of using warning
* Fix wrong logic
* Remove logger
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Remove logging import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-22 13:47:41 +02:00
Gustavo Ambrozio
8bebf138ee
Wifi scan results ( #1605 )
...
* adding a scan results wifi text sensor
* Code comment
* Adding scan results to test
* Removing redundant call
* linting
* Better method to update wifi info
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Getting loop back
At least for now.
* Trying out suggestion again
* Applying cr suggestions
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-09-22 13:44:09 +02:00
wifwucite
fd836e982e
Mqtt topics to support numeric fan speed ( #1859 )
...
* numeric speed added
* when dumping config for MQTT components log a note when skipped due to is_internal
* added new topics to paython code validation/generation
* reformatted with black
* formatting corrected
* use dump_config_ mechanism to skip internal components
* use dump_config_ mechanism to skip internal components
* style issues resolved
* do_dump_config removed
* formatting fixed
* formatting fixed
* Drop parent dump_config() calls
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 13:42:58 +02:00
Stephen Tierney
b20760c93c
Add support for LTR390 ( #1505 )
...
* Add support for ltr390
* Fix linting errors
* Fix more linting errors
* Linting fixes continued
* Linting forever
* Another one
* Fix regression and linting
* Fix narrowing conversion
* Add test and bugfix
* Add codeowners
* Update CODEOWNERS
* Update sensor defs
* Reformatted with black
* Fixed device class import
* Update CODEOWNERS
* Update CODEOWNERS
* Adding all config options
As requested https://github.com/esphome/esphome/pull/1505#discussion_r597326897
* Moving test to different config file
test1.yml runs out of memory
* Update according to comments
* Add safety clause to reading modes
* Fix clang-tidy complaint
* Revert change to i2c component
* Fix for changes in dev
* Revert "Revert change to i2c component"
This reverts commit 2810df59e9
2021-09-22 13:24:19 +02:00
Silvio
ed593544d8
Add support for Daly Smart BMS ( #2156 )
...
* Add support for Daly Smart BMS
* Fix clang-format and python lint
* Fix const declaration
* Add code owner
* Fix malloc with std::vector
* Fix with suggestions
* Revert "Fix with suggestions"
This reverts commit bc618f20cf
2021-09-22 12:03:42 +02:00
Paul Monigatti
c51352d04d
Allow non-addressable lights in light partitions ( #2256 )
2021-09-22 13:59:21 +12:00
Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Oxan van Leeuwen
133a17d6eb
Add esphal.h include to inkplate6 component ( #2286 )
2021-09-13 16:55:01 +02:00
Otto Winter
a4867a00ea
Activate owning-memory clang-tidy check ( #1891 )
...
* Activate owning-memory clang-tidy check
* Lint
* Lint
* Fix issue with new NfcTag constructor
* Update pointers for number and select
* Add back the NOLINT to display buffer
* Fix merge
* DSMR fixes
* Nextion fixes
* Fix pipsolar
* Fix lwip socket
* Format
* Change socket fix
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-13 11:31:02 +02:00
Otto Winter
e5051eefbc
API encryption ( #2254 )
2021-09-09 09:22:47 +12:00
Sergey V. DUDANOV
4e120a291e
Midea support v2 ( #2188 )
2021-09-09 09:10:02 +12:00
dgtal1
b0533db2eb
Add new trigger to fan component on_speed_set ( #2246 )
2021-09-08 15:15:57 +12:00
Oxan van Leeuwen
54de0ca0da
Reject template select/number/switches that don't handle user input ( #2230 )
2021-09-04 14:46:53 +12:00
Chris Nussbaum
a4d024f43d
Add is_on and is_off conditions for the fan component ( #2225 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-09-02 12:16:11 +12:00
Petko Bordjukov
edcd88123d
iBeacon support for ble_presence ( #1627 )
2021-09-02 11:46:15 +12:00
Jérôme Laban
140ef791aa
Support for the AirThings Wave Plus ( #1656 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-31 14:00:30 +12:00
marsjan155
94b28102f5
Add st7920 display, ( #1440 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-26 14:33:03 +12:00
Otto Winter
1b89174558
Store source package in Component for debugging ( #2070 )
2021-08-24 06:49:19 +12:00
buxtronix
947c104eff
Support for AM43 BLE blind motors ( #1744 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: René Klomp <rene@klomp.ws>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Geoff Davis <geoff@geoffdavis.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: dentra <dentra@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Barry Loong <loongyh@users.noreply.github.com>
Co-authored-by: Sergey V. DUDANOV <sergey.dudanov@gmail.com>
Co-authored-by: Balazs Scheidler <bazsi77@gmail.com>
2021-08-11 16:07:10 +12:00
Andreas Hergert
d3375193a9
Feature pipsolar anh ( #1664 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-11 07:48:32 +12:00
Dave T
1771e673d2
Warn if underscore character is used in hostname ( #2079 )
...
* Prevent underscore character being used in 'name'.
* Restrict underscores in hostnames, not all names.
* Use hostname validator for node name.
* Allow underscore in hostname but warn once.
* Add renaming instructions link to warning.
* Point underscore warning to FAQ section
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-10 14:14:42 +02:00
Jesse Hills
d258e06fd7
Add rgbct and color_temperature light platforms ( #2138 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-08-10 21:28:56 +12:00
Stephen Tierney
6a2f0f5143
Add support for PMSA003i ( #1501 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: steve <steve@Hackintosh.local>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 11:00:16 +02:00
WJCarpenter
183e2a8471
Support component tsl2591 ( #2131 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: WJCarpenter <bill@carpenter.org>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 10:48:06 +02:00
Guillermo Ruffino
f26767b65e
Dsmr component ( #1881 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:32:16 +02:00
Keith Burzinski
98d32876b5
Thermostat enhancements 2 ( #2114 )
2021-08-10 10:16:44 +02:00
Tom Matheussen
b92311402a
Adds CGPR1 - Qingping Motion & Ambient light sensor support ( #1675 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 17:06:04 +12:00
Jesse Hills
93796491af
Allow entities to be disabled by default in HA ( #2113 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-10 13:45:31 +12:00
Keith Burzinski
90c0d3e12f
Add Toshiba AC generic IR remote protocol ( #2019 )
2021-08-10 13:21:10 +12:00
buxtronix
fe7af21c91
Anova fahrenheit support ( #2126 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-08-09 08:05:36 +12:00
Andreas Hergert
6516c64e67
Add min_save_interval to total_energy/integration for memory wear ( #1665 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-03 16:41:34 +02:00
John "Warthog9" Hawley
fb24e55c8d
pmsx003: add standard particle, particle counts ( #1694 )
2021-08-02 10:32:08 +02:00
Jesse Hills
76991cdcc4
Add select entities and implement template select ( #2067 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-02 20:00:51 +12:00
Otto Winter
16dbbfabc6
Add demo integration ( #2085 )
2021-07-29 11:50:55 +02:00
Mike Meessen
ee19ef1aac
Add support for the HRXL MaxSonar WR series sensors ( #2020 )
2021-07-29 11:37:31 +02:00
Tyler Menezes
5e2d4e332a
Add T6615 ( #1170 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-29 11:24:36 +02:00
rnauber
c6c857dfff
Add support for the TLC5947 24-Channel, 12-Bit PWM LED Driver ( #2066 )
...
Co-authored-by: Richard Nauber <richard@nauber.dev>
2021-07-29 11:16:04 +02:00
Nicholas Peters
8dbac20f8b
Add SDP3x sensor ( #2064 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-29 10:57:52 +02:00
Stefan Agner
d9f09a7523
Initial ESP32-C3-DevKitM-1 board support ( #2062 )
...
Co-authored-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-07-26 11:10:56 +02:00
Stefan Agner
159744e09e
Support library override using named library with repository ( #2056 )
2021-07-26 10:50:45 +02:00
Sourabh Jaiswal
acbb8e9fd0
Added support for Selec Energy Meter ( #1993 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-22 15:31:28 +12:00
Pasi Suominen
90394a50df
Added support for pvvx_mithermometer sensor ( #1546 )
...
Co-authored-by: Pasi Suominen <pasiz@pasizdesk.pasiz.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-22 15:21:08 +12:00
SenexCrenshaw
0651716b96
Nextion upload and sensors ( #1464 )
...
Co-authored-by: Senex Crenshaw <senexcrenshaw@gmail.com>
2021-07-15 12:51:15 +12:00
Jesse Hills
dd37a4e04c
Add Number entities (from Home Assistant) ( #1971 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-07-13 07:20:12 +12:00
Maurice Makaay
623570a117
Add state callback to ota component ( #1816 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-07-11 07:52:19 +12:00
buxtronix
ab31117bf3
Anova ble component ( #1752 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-05 11:59:12 +12:00
Adrián Panella
d31040f5d8
hlw8012: fix constants for BL0937 ( #1973 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-05 11:09:09 +12:00
Martin Weinelt
8ca34f7098
Bump hypothesis from 5.21.0 to 5.49.0 ( #1753 )
2021-07-05 10:10:59 +12:00
Otto Winter
bfca3f242a
Disallow power_save_mode NONE if used together with BLE ( #1950 )
2021-06-22 10:53:10 +02:00
Barry Loong
e5929225eb
Fix typo in test3.yaml ( #1928 )
2021-06-17 21:39:59 +12:00
Jesse Hills
5a2cfa2798
Move esp32_ble_server to its own component ( #1898 )
2021-06-12 08:31:15 +12:00
Jesse Hills
5cf18235e3
Allow setting creator project name and version into code ( #1872 )
2021-06-09 13:04:00 +12:00
Jesse Hills
a70a205ace
Improv - BLE WiFi provisioning ( #1807 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-06-08 11:56:21 +12:00
Lumpusz
ebadaa9660
Add preset, custom_preset and custom_fan_mode support to climate ( #1471 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-04 22:04:54 +12:00
Franck Nijhof
11fb54c74e
Add support for Sensor state class ( #1835 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 13:49:56 +12:00
foxsam21
2b9350ce76
Added vol +/- control to dfplayer ( #1856 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 10:12:23 +12:00
Ryan Mounce
c3938d04f3
Support Tuya light color temperature control ( #1412 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-02 09:32:16 +12:00
David Kiliani
f968713be8
Add optional lambda to BLESensor for raw data parsing ( #1851 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 21:46:54 +12:00
0hax
afa436fe8f
teleinfo: use text_sensor and sensor. ( #1403 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-06-01 13:32:09 +12:00
Oxan van Leeuwen
25af5ab7c6
Drop 128x160 ESP-32 camera resolution ( #1813 )
2021-05-31 22:27:41 +12:00
Andrew Zaborowski
4d586b1446
Add CS5460A power-meter component ( #1474 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:07:33 +12:00
polyfaces
bb759d52c8
Add support for SDMXXX energy meters ( #1260 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:05:49 +12:00
Guillermo Ruffino
c79d700d03
Add validate to components ( #1631 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 10:06:45 +12:00
Oxan van Leeuwen
824f3187ac
Update platformio.ini settings and fix test apps ( #1815 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-05-25 07:47:45 +12:00
Stanislav Meduna
072dce340e
Add the on_page_change display trigger ( #1687 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-24 08:56:04 +12:00
Jesse Hills
4ffa68b773
Merge branch 'master' into dev
2021-05-19 14:02:04 +12:00
romerod
d3e291b442
Add on_tag_removed trigger to pn532 ( #1436 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-18 11:54:09 +12:00
Otto Winter
d4686c0fb1
Introduce new async-def coroutine syntax ( #1657 )
2021-05-17 17:14:15 +12:00
Jesse Hills
030c87d142
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-17 13:53:35 +12:00
Stanislav Meduna
d0eaebe19f
Add support for the XPT2046 touchscreen controller ( #1542 )
2021-05-17 13:03:58 +12:00
Franck Nijhof
5645be4e0f
Add attribute support to Home Assistant sensors ( #1770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-17 11:16:22 +12:00
Jesse Hills
7e3b8fd346
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-15 17:02:52 +12:00
Jesse Hills
4f6982fbc5
Add action to set total pulses on pulse_meter ( #1757 )
2021-05-14 20:06:31 +12:00
Stanislav Meduna
00c144daeb
Autorepeat filter for the binary sensors ( #1681 )
...
* add the autorepeat filter
* add a test for the autorepeat filter
* make no timing equivalent to a single default one
2021-05-13 17:36:53 -03:00
BoukeHaarsma23
9e7acd6f75
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
Yuval Aboulafia
7d9c043f1d
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
BoukeHaarsma23
54660300e9
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:14:01 +12:00
Yuval Aboulafia
cdc9c99d40
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-12 10:16:59 +12:00
Jesse Hills
5c3af1d3f6
Allow duration for deep_sleep.enter to be templateable ( #1765 )
2021-05-11 12:36:14 -03:00
Jesse Hills
44562dbef1
Merge branch 'dev' into bump-1.18.0b1
2021-05-10 07:54:06 +12:00
Otto Winter
229bf719a2
Implement external custom components installing from YAML ( #1630 )
...
* Move components import loading to importlib MetaPathFinder and importlib.resources
* Add external_components component
* Fix
* Fix
* fix cv.url return
* fix validate shorthand git
* implement git refresh
* Use finders from sys.path_hooks instead of looking for __init__.py
* use github:// schema
* error handling
* add test
* fix handling git output
* revert file check handling
* fix test
* allow full component path be specified for local
* fix test
* fix path handling
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-07 15:02:17 -03:00
Farzad E
2225594ee8
Added an option to disable mDNS ( #1716 )
...
* Added an option to disable mDNS
* Fixed linter issues
* Moved the enable_mdns option to WiFi and Ethernet components
* extracted common method for add mdns library
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-06 12:31:42 -03:00
buxtronix
02aa75f68c
BLE client support on ESP32 ( #1177 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-03 11:10:50 +12:00
Wojtek Strzalka
4ae4a4ee88
Support for TOF10120 distance sensor ( #1375 )
2021-04-29 11:49:46 +12:00
Barry Loong
4d7c1ae143
Add Grow Fingerprint Reader ( #1356 )
2021-04-29 10:08:27 +12:00
Stephen Tierney
7fb116d87d
Add support for SHT4X ( #1512 )
2021-04-28 20:22:46 +12:00
SenexCrenshaw
2033ac34e5
Sgp40 ( #1513 )
...
* Start of SGP40 dev
* Clean up
* Initial Commit
* VOC is working
* Fixed up sensor config
* Lint Fixes
Added in save/restore baseline
Noted original repo in header
* Lint Fixes
Added to test
* Lint Fixes
* Added additional check on restoring
* Removed double check
* Changed defines to static const double
* Changed defines to const
Do not send voc index until sensor stabilizes
* Fixed sensor stabilization message
* Fixup according to PR
* samples_read increment fix
* Fixed missing device class
* Choose a SENSOR device class
* Moved some sensors for tests
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-04-08 22:40:19 -03:00
Peter Kuehne
eaf9735eda
Disallow _ in node name ( #1632 )
2021-04-08 14:26:01 +02:00
rbaron
bf01c22e1f
Adds support for b-parasite soil moisture sensor ( #1666 )
2021-04-08 13:59:30 +02:00
Stanislav Meduna
808e3be324
Add the display.is_displaying_page condition ( #1646 )
...
* display: add the display.is_displaying_page condition
* use maybe_simple_value for page_id
* add test
2021-04-02 23:00:41 -03:00
Andreas Hergert
9e23987db8
Add I2CMultiplexer in generel and the TCA9548A in special ( #1410 )
...
* Added I2CMultiplexer in generel and the TCA9548A in special
* cleanup
* tidy
* tidy
* tidy
* tidy
* Update CODEOWNERS
* Update CODEOWNERS
* added CODEOWNERS
* Fix CODEOWNERS
* protected function
* fixed scan
* fixed style
* added to test1.yaml
* Update esphome/components/tca9548a/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* added define statements for I2C Multiplexer
* fix
* try to tidy
* bug fix
* tidy
* override fix
* only change channel if different
* tidy
* added test
* testfix
* added defines
* tidy
* fix dep
* like recommended
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-29 16:50:30 -03:00
Jesse Hills
4d340dc029
Merge branch 'dev' into bump-1.17.0b1
2021-03-22 20:08:57 +13:00
Jesse Hills
af3273d930
Add trigger for http actions to receive the status code ( #1599 )
2021-03-22 16:26:10 +13:00
Niccolò Maggioni
8f1eb77e05
Background calibration & ABC commands for SenseAir S8 ( #1623 )
2021-03-22 12:59:41 +13:00
matikij
91898cb814
Add 2.13in-ttgo-b1 waveshare epaper module. ( #1326 )
2021-03-20 20:32:46 +13:00
Steve Baxter
a77784a6da
Implement pulse_meter as an improvement on pulse_counter and pulse_width for meters ( #1434 )
2021-03-19 21:16:27 +13:00
Mike Ryan
f63f9168ff
Add addressable_light display platform ( #1272 )
2021-03-18 19:08:50 +13:00
Sergey V. DUDANOV
f34c9b33fc
Midea climate support ( #1328 )
...
* Added support for Midea IoT climate devices via UART interface (USB-dongle)
* Fixed lint checks
* Fixed lint checks
* CODEOWNERS update
* Clang-format
* Clang-format
* Add network device notification message support (show WiFi sign on devices)
* Make wifi_signal_sensor optional component
* Some optimization
* Optimizations and code formatting
* Fixed lint checks
* Fixed lint checks
* Fixed sign error
* Code changes
* Network notify repeat every 10 min
* Added log messages
* Fixed lint checks
* Refactoring: MideaClimate => MideaAC
* Using enums instead literals in Midea states
* Enum changed to be more correct
* Shrink notify frame to 32 bytes
* Fixed lint checks
* Change notify frame appliance type to common broadcast
* Control optimization
* Fixed control error
* Control command now don't reset others uncontrollable properties of device
* Fixed lint checks
* Some optimization
* on_receive callback give const Frame
* Fix control
* Fixes
* Some minor changes
* Fixed lint error
* No dependency from wifi_signal sensor for stretched WiFi icon. New option: stretched_icon instead wifi_signal_id.
* Fix option name
* Added export of outdoor temperature as sensor value
* Fixed lint errors
* Fixed pylint error
* Minor fix
* Fix temperature overflow in some cases
* Added answer on QueryNetwork command from appliance. Now don't wait for ack on 0x0D command.
* Fix lint error
* Added humidity setpoint optional sensor
* Added boolean options 'swing_horizontal' and 'swing_both'
* Added debug frame output
* Added debug frame output
* Fix lints error
* Some debug output optimization
* Fix lint check
* Some code optimization: adding templates
* Fix lint error
* Added sensors device classes
* Python code reformatted with black formatter
* RX frame debug message
RX frame debug message now prints before checking
* Remove CRC check for receiving frames
* Added experimental power usage option
* Added power usage option
* Fixed lint errors
* Major changes. See esp-docs.
* Added tests in test4.yaml
* Added tests in test1.yaml
* Added wifi dependency
* Fix test1.yaml
* Some fix :)
* One more refactoring
* One more refactoring
* One more refactoring
2021-03-17 17:27:50 -03:00
Jesse Hills
faf577a9dd
Add option to suffix name with mac address ( #1615 )
...
* Add option to suffix name with mac address
* Rename and add to test file
2021-03-17 17:22:48 -03:00
Jim Ekman
7708b81ef5
Support fan speed levels ( #1541 )
...
* Add fan speed percentage support to the API
* Add float fan speed percentage
* Add percentage support to automation and configuration
* Update Tuya fan
* Fix pylint warning
* Update API to use speed levels instead of percentage
* Use speed levels
* Fix type warnings
* MQTT component now converts between speed levels and enums
* Webserver now supports speed_level
* Update prometheus
* Remove low/medium/high settings from speed fan
* Remove unused enum
* Configurable speed levels for speed fan
* Remove unused import
* Rename speed_level->speed and speed_levels->speed_count
* Rename supported_speed_levels -> supported_speed_count in API and FanTraits
Field id stays the same in the protocol, so the change is not breaking for aioesphome.
2021-03-17 10:40:02 -03:00
Massimiliano Ravelli
28a72fa56b
Fixed component_tests config ( #1608 )
2021-03-12 19:58:43 -03:00
Guillermo Ruffino
1e227e8051
Schema dump ( #1564 )
...
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
2021-03-07 21:05:08 -03:00
Guillermo Ruffino
d5cf4b7eac
Improve error checking: too many component id candidates ( #1570 )
...
* add error too many candidates
* Improve error checking of ids
2021-03-07 19:59:32 -03:00
Jesse Hills
570ec36fe3
MCP23XXX Refactor ( #1560 )
...
* Refactor MCP23XXX classes to consolidate shared code
* Update test mcp23xxx pin schemas
2021-03-07 16:23:54 -03:00
Guillermo Ruffino
69879920eb
add-black ( #1593 )
...
* Add black
Update pre commit
Update pre commit
add empty line
* Format with black
2021-03-07 16:03:16 -03:00
needspeed
0f151a8f6b
Extend 'uart:' with 'invert:' for esp32 ( #1586 )
2021-03-06 10:25:07 -03:00
Gabe Cook
88b46b7487
Add min/max filters ( #1569 )
2021-03-05 10:10:06 -03:00
Moritz Glöckl
8e93735861
Add support for the SM300D2 7-in-1 sensor module ( #1524 )
...
* Added support for SM300D2 sensor module
* Fixed lint errors due to added tvoc config
* add device class
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 21:54:52 -03:00
SenexCrenshaw
ac25b138f5
Migrate ESPColor to Color ( #1551 )
...
* Migrate ESPColor to Color
* color.h constructor fix
* Updated componets to use Color
Added a using for ESPColor
* Lint fixes
* Fixed value error
* Update display components to use colorutil
* Updated to latest PR comments
* Fixed COLOR_WHITE
* Moved esp_scale to color_utils
* Rename color_utils to display_color_utils
2021-03-02 11:08:57 -03:00
Seppel Hardt
bdf004867d
Added samsung36 ir protocol ( #1438 )
...
* Added samsung36 ir protocol
* Make linter happy
* Added test and fixed python failure
* Sorry for the commits but linter was still not happy :)
* Okay have to run script/clang-format -i
Co-authored-by: tuxBurner <tuxBurner@boggo.de>
2021-02-27 20:16:27 -03:00
Gabe Cook
08ecca86bc
Add send_every to uart switch for recurring data ( #1514 )
2021-02-27 19:53:53 -03:00
Kurt Kellner
b91723344e
Vl53l0x change address ( #1126 )
...
* Added vl53l0x change address and timeout
* Added vl53l0x change address and timeout
* vl53l0x code cleanup and update test
* remove executable bit
* lint code cleanup
* code review fixes including timeout default to 10ms
* Code review cleanup and change a WARN log level message to DEBUG
* Fix issue where warn should be temporary
* Added name of sensor to warning message
* Fix blacklist lint issue
* Remove unused import
2021-02-25 19:12:06 -03:00
spilin
3d0310d0e0
Add dial support for sim800l component ( #1558 )
2021-02-25 18:11:15 -03:00
Kris
a925036ff8
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-20 19:29:52 +13:00
Guillermo Ruffino
25924ca4e8
fix substitution losing track of document range ( #1547 )
2021-02-19 21:52:42 -03:00
Kris
c92c439d17
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-18 07:12:02 +13:00
Chris Nussbaum
dce20680d7
Add duration option to action start deep sleep ( #1526 )
2021-02-15 14:32:22 -03:00
marecabo
f95be6a0df
Device class attribute for sensor component ( #1525 )
...
* Add constants for sensor device_class
* Add device_class attribute to sensor component
* Add device_class attribute to sensor class
* Add device_class to mhz19 temperature sensor
* Add device_class to sensor in api component
* Add test for device_class of sensor
* Rename DEVICE_CLASS_NONE to DEVICE_CLASS_EMPTY for consistency
* Make optional attributes of sensor component truly optional
2021-02-15 12:49:02 -03:00
SenexCrenshaw
a342302114
st7735_conf_fixes ( #1530 )
2021-02-14 02:21:43 -03:00
Keith Burzinski
65c7e27a43
MCP230xx open drain interrupt pins ( #1243 )
2021-02-14 10:01:21 +13:00
Frank Bakker
57b56010da
Added energy sensor to hlw8012 ( #1198 )
2021-02-14 10:01:21 +13:00
Keith Burzinski
b52f7cfe86
MCP230xx open drain interrupt pins ( #1243 )
2021-02-13 22:07:11 +13:00
Frank Bakker
81b512a7b3
Added energy sensor to hlw8012 ( #1198 )
2021-02-13 21:57:06 +13:00
Jérémy JOURDIN
04d8593f38
Add MCP4725 DAC Component ( #1418 )
...
* Add MCP4725 DAC
* Fix lint
* Fix lint
* Fix lint
* Lint & cleanup
* Lint again
* One more lint
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-06 12:18:48 -03:00
fkirill
de3377132d
Adding support for the Inkbird IBS-TH1 Mini sensor ( #1099 )
2021-02-06 17:04:47 +13:00
Florian Mösch
e2ad6fe3d8
rename read/write to read/time/write_time ( #1468 )
2021-01-26 13:39:42 +13:00
Florian Mösch
6781d08c9b
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-26 13:39:42 +13:00
Guillermo Ruffino
52c67d715b
add http request tests ( #1448 )
...
* add http request tests
* add to test3 for esp8266
* move test action to another trigger
2021-01-23 19:44:20 -03:00
Florian Mösch
b28735d63b
rename read/write to read/time/write_time ( #1468 )
2021-01-18 09:35:35 -03:00
Florian Mösch
4c105398f7
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-18 09:34:50 -03:00
SenexCrenshaw
28f2582256
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:37 +13:00
Florian Mösch
652f6058d1
make time components polling components ( #1443 )
...
* make real time clock components polling components
* add test
2021-01-17 17:06:37 +13:00
Guillermo Ruffino
717aab7c8b
Add rc522 i2c ( #1432 )
...
* split to spi and i2c
* fix binary_sensor
* i2c comms ready
* fix rc522_spi binary sensor compat
* lint
* lint
* add test and codeowners
* fix refactor
2021-01-17 17:06:37 +13:00
SenexCrenshaw
36089a1400
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-14 07:33:19 +13:00
