* Add support for TMP1075 temperature sensor
TMP1075 is a temperature sensor with I2C interface in industry standard
LM75 form factor and pinout.
https://www.ti.com/product/TMP1075
Example YAML:
```yaml
sensor:
- platform: tmp1075
name: TMP1075 Temperature
id: radiator_temp
update_interval: 10s
i2c_id: i2c_bus_1
conversion_rate: 27.5ms
alert:
limit_low: 50
limit_high: 75
fault_count: 1
polarity: active_high
```
* Add myself as codeowner of the TMP1075 component
* Include '°C' unit when logging low/high limit setting
* Reformat
No functional changes.
* Fix logging: use %.4f for temperatures, not %d
* Fix config initialisation
* Use relative include for `tmp1075.h`
* Apply formatting changes suggested by script/clang-tidy for ESP32
* Add YAML to test1.yaml
* Fix test1.yaml by giving TMP1075 a name
* Less verbose logging (debug -> verbose level)
* Schema: reduce accuracy_decimals to 2
* I2C address as hexadecimal
* Proper name for enum in Python
The enum on the C++ side was renamed (clang-tidy) but I forgot to take that
into account in the Python code.
* Expose 'alert function' to the code generator/YAML params and remove 'shutdown'
Shutdown mode doesn't work the way I expect it, so remove it until someone
actually asks for it.
Also 'alert mode' was renamed to 'alert function' for clarity.
* Move simple setters to header file
* Remove `load_config_();` function
* Add push to talk voice assistant
* Refactor most code into voice_assistant
* Make voice_assistant the component and remove push_to_talk (can be done in yaml)
* Fix component setup
* Always AF_INET to match serverside
* Fix microphone and media player co-existence
* Format
* Update codeowners
* Update test file
* Fix endifs
* nullptr not NULL
* clang-tidy
* Format
* fixup: Add VA event data
* Generate proto
* Parse and log events
* Add default to switch
* Fix
* Add mic/va to test5
* - Removed cleaning the screen twice.
\Should be handled by `DisplayBuffer::init_internal_();`
- Made ili9341::initalize() protected and renamed
\ it to ili9341::initalize().
- ili9341::initalize() should only init the display
\ and set the width and heigth.
* removed to much
* clang format fixes
* removing trailing underscors for
protected virtual methods
* removed the "override" on display()
* clang fixes
* restored old changes
* Renamed the ili9341 platform to ili9xxx and added
multiple drivers as well. including PR #3848
* fixed most of the clang reported issues
* fixed reported issues
* last fixes
* Setting the right codeowners
* missing changes
* fixed naming Display() method.
* clang again
* clang fix
* fixes reported by @jesserockz & @gpambrozio
* a change to display.py removing an unneeded var
* re-introduce **backlight** option.
* update the ili9488 initialization
* update the ili9488 initialization and fix typo
* fixed typo
* add missing constants
* swap height and width back for the ili9488
* init fixes ili9488
* fixed lint issue
testing the init code
* oeps
* init fixes ili9488
* fixed wrong define
* fixed wrong define again
* removed some spaces
* revert to ili9341
* Remove parts that where used for
the switchplate
* lint fixes and removing unused function
* fix error and introducing 16bit color option
* fix error and introducing 16bit color option
* fix clang issue
* clang fix
* clang issue again
* is this what clang exprect
* clang fix
* clang fix
* try again
* let try again
* and again
* and the last clang fix
* remove the need of wifi
* update dimentions
* update ili8488 init code.
* update dimentions
* allow to change height and width
* dump color mode config
* fix
* fix
* modify logging
* referd back unrelated change
* code formatting commit and moving functions around
* add missing ;
* update code
* update code
* use the correct write_array for sending uint16_t
* fix panic loop
* fix panic loop
* - update the test file
- fixed sending display data
* clang fixes
* clang fixes
* clang fixes again
* remove .gitignore items
* remove .gitignore items
* make sure Update() can can not be called while
called
* clang correction
* adding a test yaml for the ili9341
* Update ili9341 example
* Make test ili9xxx/tests only local
* restore back old ili9341 driver code
* Add a new config for the M5Core
* fix clang request
* reverd to restore of the old ili9341
there is no proper way to say it is depricated.
* Remove the backlight/led pin from the config.
You need to use a proper light platform component
* Ili9488init changes (#88)
Fixed ILI9488 init settings, and adjusted pixel handling code to push pixels in 18 bit format.
This does not change the internal 16-bit representation.
* fixed some leftover clang issues from the merge.
* fixed the slang-tidy request.
* remove `backlight_pin` warning.
---------
Co-authored-by: JD Steffen <jdsteffen81@gmail.com>
* Add support for AS7341 spectral color sensor.
* Run clang-format and clang-tidy.
* Post-review changes.
* Apply suggestions from code review
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Add support for FS3000 sensor.
* add fs3000 to test yaml
* Clean up code with clang.
* Clean up sensor.py file.
* Update CODEOWNERS file.
* Apply suggestions from code review regarding sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Apply suggestions from code review for basic issues regarding C++ code
- removed unnecessary default for FS3000Model
- use "this->" before any sensor update
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Move model setup to overall setup function.
* Remove unneeded CONF_ID from sensor.py
* Run clang-format
* Move set_model code to header file now that it is simplified
* Update fs3000.h
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Add mopeka standard tank sensor.
* Enhance mopeka ble to find standard sensors.
* Updated `CODEOWNERS` file
* Move default from cpp to py.
* Format documents with esphome settings.
* Linter wants changes.
* Update name of `get_lpg_speed_of_sound`.
* manually update `CODEOWNERS`.
* Manually update CODEOWNER, because `build_codeowners.py. is failing.
* Add comments.
* Use percentage for `propane_butane_mix`.
* add config to `dump_config()`
* Formatting
* Use struct for data parsing and find best data.
* Add `this`.
* Consistant naming of configuration.
* Fix format issues.
* Make clang-tidy happy.
* Adjust loop variable.
---------
Co-authored-by: Your Name <you@example.com>
jan-hofmeier
kahrendt
Kevin P. Fleming
MrEditor97
Pavlo Dudnytskyi
Graham Brown
Sybren A. Stüvel
Evgeny
Daniel Mahaney
Jesse Hills
bouhaa
looping40
Philippe FOUQUET
Mat931
Ben Hoff
NP v/d Spek
Morgan Robertson
DAVe3283
Yaroslav Heriatovych
Samuel Sieb
Shreyas Karnik
Fabian
sebcaps
Valentin Ochs
Mathias Stock
EtienneMD
brogon
Cossid
Steve Rodgers
Stanislav Meduna