# Tests for ESP32-S3 boards
---
wifi:
  ssid: "ssid"

network:
  enable_ipv6: true

esp32:
  board: esp32s3box
  variant: ESP32S3
  framework:
    type: arduino

esphome:
  name: esp32-s3-test

logger:

debug:

psram:

light:
  - platform: neopixelbus
    type: GRB
    variant: WS2812
    pin: GPIO38
    num_leds: 1
    id: neopixel
    method: esp32_rmt
    name: neopixel-enable
    internal: false
    restore_mode: ALWAYS_OFF
  - platform: spi_led_strip
    num_leds: 4
    color_correct: [80%, 60%, 100%]
    id: rgb_led
    name: "RGB LED"
    data_rate: 8MHz
  - platform: binary
    name: "Red Info Light"
    output: board_info_ed
    entity_category: diagnostic
    restore_mode: ALWAYS_OFF

spi:
  id: spi_id_1
  clk_pin: GPIO7
  mosi_pin: GPIO6
  interface: any

spi_device:
  id: spidev
  data_rate: 2MHz
  spi_id: spi_id_1
  mode: 3
  bit_order: lsb_first

font:
  - file: "gfonts://Roboto"
    id: roboto
    size: 20

display:
  - platform: ili9xxx
    id: displ8
    model: ili9342
    cs_pin: GPIO5
    dc_pin: GPIO4
    reset_pin:
      number: GPIO48
      allow_other_uses: true
    lambda: |-
      it.printf(10, 100, id(roboto), Color(0x123456), COLOR_OFF, display::TextAlign::BASELINE, "%f", id(heap_free).state);

i2c:
  scl: GPIO18
  sda: GPIO8

output:
  - platform: gpio
    id: board_info_ed
    pin:
      # This pin is reserved on the ESP32S3!
      number: 26
      ignore_pin_validation_error: true

touchscreen:
  - platform: tt21100
    display: displ8
    interrupt_pin:
      number: GPIO3
      ignore_strapping_warning: true
      allow_other_uses: false
    reset_pin:
      number: GPIO48
      allow_other_uses: true

binary_sensor:
  - platform: tt21100
    name: Home Button
    index: 1

sensor:
  - platform: debug
    free:
      id: heap_free
      name: "Heap Free"
    block:
      name: "Max Block Free"
    loop_time:
      name: "Loop Time"
    psram:
      name: "PSRAM Free"

# Purposely test that `animation:` does auto-load `image:`
# Keep the `image:` undefined.
# image:

animation:
  - id: rgb565_animation
    file: pnglogo.png
    type: RGB565
    use_transparency: false