--- # copy of test5.yaml configured to build on IDF 5 esphome: name: test11-5 build_path: build/test11.5 project: name: esphome.test11_5_project version: "1.0.0" esp32: board: nodemcu-32s framework: type: esp-idf version: 5.0.2 platform_version: 6.3.2 advanced: ignore_efuse_mac_crc: true wifi: networks: - ssid: "MySSID" password: "password1" manual_ip: static_ip: 192.168.1.23 gateway: 192.168.1.1 subnet: 255.255.255.0 network: enable_ipv6: true api: ota: logger: debug: psram: uart: - id: uart_1 tx_pin: 1 rx_pin: 3 baud_rate: 9600 - id: uart_2 tx_pin: 17 rx_pin: 16 baud_rate: 19200 i2c: frequency: 100khz spi: - id: spi_1 clk_pin: 12 mosi_pin: 13 miso_pin: 14 - id: spi_2 clk_pin: 32 mosi_pin: 33 modbus: uart_id: uart_1 flow_control_pin: 5 id: mod_bus1 modbus_controller: - id: modbus_controller_test address: 0x2 modbus_id: mod_bus1 mqtt: broker: test.mosquitto.org port: 1883 discovery: true discovery_prefix: homeassistant idf_send_async: false on_message: topic: testing/sensor/testing_sensor/state qos: 0 then: # yamllint disable rule:line-length - lambda: |- ESP_LOGD("Mqtt Test", "testing/sensor/testing_sensor/state=[%s]", x.c_str()); # yamllint enable rule:line-length vbus: - uart_id: uart_2 binary_sensor: - platform: gpio pin: GPIO0 id: io0_button icon: mdi:gesture-tap-button - platform: modbus_controller modbus_controller_id: modbus_controller_test id: modbus_binsensortest register_type: read address: 0x3200 bitmask: 0x80 # (bit 8) lambda: "return x;" - platform: tm1638 id: Button0 key: 0 filters: - delayed_on: 10ms on_press: then: - switch.turn_on: Led0 on_release: then: - switch.turn_off: Led0 - if: condition: ble.enabled then: - ble.disable: else: - ble.enable: - platform: tm1638 id: Button1 key: 1 on_press: then: - switch.turn_on: Led1 on_release: then: - switch.turn_off: Led1 - platform: tm1638 id: Button2 key: 2 on_press: then: - switch.turn_on: Led2 on_release: then: - switch.turn_off: Led2 - platform: tm1638 id: Button3 key: 3 on_press: then: - switch.turn_on: Led3 on_release: then: - switch.turn_off: Led3 - platform: tm1638 id: Button4 key: 4 on_press: then: - output.turn_on: Led4 on_release: then: - output.turn_off: Led4 - platform: tm1638 id: Button5 key: 5 on_press: then: - output.turn_on: Led5 on_release: then: - output.turn_off: Led5 - platform: tm1638 id: Button6 key: 6 on_press: then: - output.turn_on: Led6 on_release: then: - output.turn_off: Led6 - platform: tm1638 id: Button7 key: 7 on_press: then: - output.turn_on: Led7 on_release: then: - output.turn_off: Led7 - platform: gpio id: sn74hc165_pin_0 pin: sn74hc165: sn74hc165_hub number: 0 - platform: ezo_pmp pump_state: name: "Pump State" is_paused: name: "Is Paused" - platform: matrix_keypad keypad_id: keypad id: key4 row: 1 col: 1 - platform: matrix_keypad id: key1 key: 1 - platform: vbus model: deltasol_bs_plus relay2: name: Relay 2 On sensor1_error: name: Sensor 1 Error - platform: vbus model: custom command: 0x100 source: 0x1234 dest: 0x10 binary_sensors: - id: vcustom_b name: VBus Custom Binary Sensor lambda: return x[0] & 1; tlc5947: data_pin: GPIO12 clock_pin: GPIO14 lat_pin: GPIO15 gp8403: - id: gp8403_5v voltage: 5V - id: gp8403_10v voltage: 10V output: - platform: gpio pin: GPIO2 id: built_in_led - platform: tlc5947 id: output_red channel: 0 max_power: 0.8 - platform: mcp47a1 id: output_mcp47a1 - platform: modbus_controller modbus_controller_id: modbus_controller_test id: modbus_output_test lambda: |- return x * 1.0 ; address: 0x9001 value_type: U_WORD - platform: tm1638 id: Led4 led: 4 - platform: tm1638 id: Led5 led: 5 - platform: tm1638 id: Led6 led: 6 - platform: tm1638 id: Led7 led: 7 - platform: gp8403 id: gp8403_output_0 gp8403_id: gp8403_5v channel: 0 - platform: gp8403 gp8403_id: gp8403_10v id: gp8403_output_1 channel: 1 demo: esp32_ble: enable_on_boot: false esp32_ble_server: manufacturer: ESPHome model: Test11 esp32_improv: authorizer: io0_button authorized_duration: 1min status_indicator: built_in_led ezo_pmp: id: hcl_pump update_interval: 1s number: - platform: template name: My template number id: template_number_id optimistic: true max_value: 100 min_value: 0 step: 5 unit_of_measurement: "%" mode: slider device_class: humidity on_value: - logger.log: format: Number changed to %f args: [x] set_action: - logger.log: format: Template Number set to %f args: [x] - number.set: id: template_number_id value: 50 - number.to_min: template_number_id - number.to_min: id: template_number_id - number.to_max: template_number_id - number.to_max: id: template_number_id - number.increment: template_number_id - number.increment: id: template_number_id cycle: false - number.decrement: template_number_id - number.decrement: id: template_number_id cycle: false - number.operation: id: template_number_id operation: Increment cycle: false - number.operation: id: template_number_id operation: !lambda "return NUMBER_OP_INCREMENT;" cycle: !lambda "return false;" - id: modbus_numbertest platform: modbus_controller modbus_controller_id: modbus_controller_test name: ModbusNumber address: 0x9002 value_type: U_WORD lambda: "return x * 1.0;" write_lambda: |- return x * 1.0 ; multiply: 1.0 select: - platform: template name: My template select id: template_select_id optimistic: true initial_option: two restore_value: true on_value: - logger.log: format: Select changed to %s (index %d)" args: ["x.c_str()", "i"] set_action: - logger.log: format: Template Select set to %s args: ["x.c_str()"] - select.set: id: template_select_id option: two - select.first: template_select_id - select.last: id: template_select_id - select.previous: template_select_id - select.next: id: template_select_id cycle: false - select.operation: id: template_select_id operation: Previous cycle: false - select.operation: id: template_select_id operation: !lambda "return SELECT_OP_PREVIOUS;" cycle: !lambda "return true;" - select.set_index: id: template_select_id index: 1 - select.set_index: id: template_select_id index: !lambda "return 1 + 1;" options: - one - two - three - platform: modbus_controller name: Modbus Select Register 1000 address: 1000 value_type: U_WORD optionsmap: "Zero": 0 "One": 1 "Two": 2 "Three": 3 sensor: - platform: adc id: adc_sensor_p32 name: ADC pin 32 pin: 32 attenuation: 11db update_interval: 1s - platform: internal_temperature name: Internal Temperature - platform: selec_meter total_active_energy: name: SelecEM2M Total Active Energy import_active_energy: name: SelecEM2M Import Active Energy export_active_energy: name: SelecEM2M Export Active Energy total_reactive_energy: name: SelecEM2M Total Reactive Energy import_reactive_energy: name: SelecEM2M Import Reactive Energy export_reactive_energy: name: SelecEM2M Export Reactive Energy apparent_energy: name: SelecEM2M Apparent Energy active_power: name: SelecEM2M Active Power reactive_power: name: SelecEM2M Reactive Power apparent_power: name: SelecEM2M Apparent Power voltage: name: SelecEM2M Voltage current: name: SelecEM2M Current power_factor: name: SelecEM2M Power Factor frequency: name: SelecEM2M Frequency maximum_demand_active_power: name: SelecEM2M Maximum Demand Active Power disabled_by_default: true maximum_demand_reactive_power: name: SelecEM2M Maximum Demand Reactive Power disabled_by_default: true maximum_demand_apparent_power: name: SelecEM2M Maximum Demand Apparent Power disabled_by_default: true - id: modbus_sensortest platform: modbus_controller modbus_controller_id: modbus_controller_test address: 0x331A register_type: read value_type: U_WORD - platform: t6615 uart_id: uart_2 co2: name: CO2 Sensor - platform: bmp3xx temperature: name: BMP Temperature oversampling: 16x pressure: name: BMP Pressure address: 0x77 iir_filter: 2X - platform: sen5x id: sen54 temperature: name: Temperature accuracy_decimals: 1 humidity: name: Humidity accuracy_decimals: 0 pm_1_0: name: PM <1µm Weight concentration id: pm_1_0 accuracy_decimals: 1 pm_2_5: name: PM <2.5µm Weight concentration id: pm_2_5 accuracy_decimals: 1 pm_4_0: name: PM <4µm Weight concentration id: pm_4_0 accuracy_decimals: 1 pm_10_0: name: PM <10µm Weight concentration id: pm_10_0 accuracy_decimals: 1 nox: name: NOx voc: name: VOC algorithm_tuning: index_offset: 100 learning_time_offset_hours: 12 learning_time_gain_hours: 12 gating_max_duration_minutes: 180 std_initial: 50 gain_factor: 230 temperature_compensation: offset: 0 normalized_offset_slope: 0 time_constant: 0 auto_cleaning_interval: 604800s acceleration_mode: low store_baseline: true address: 0x69 - platform: mcp9600 thermocouple_type: K hot_junction: name: Thermocouple Temperature cold_junction: name: Ambient Temperature - platform: ezo_pmp current_volume_dosed: name: Current Volume Dosed total_volume_dosed: name: Total Volume Dosed absolute_total_volume_dosed: name: Absolute Total Volume Dosed pump_voltage: name: Pump Voltage last_volume_requested: name: Last Volume Requested max_flow_rate: name: Max Flow Rate - platform: vbus model: deltasol c temperature_3: name: Temperature 3 operating_hours_1: name: Operating Hours 1 heat_quantity: name: Heat Quantity time: name: System Time - platform: debug free: name: "Heap Free" block: name: "Heap Max Block" loop_time: name: "Loop Time" psram: name: "PSRAM Free" - platform: vbus model: custom command: 0x100 source: 0x1234 dest: 0x10 sensors: - id: vcustom name: VBus Custom Sensor lambda: return x[0] / 10.0; - platform: kuntze ph: name: Kuntze pH temperature: name: Kuntze temperature - platform: ade7953_i2c irq_pin: 16 voltage: name: ADE7953 Voltage current_a: name: ADE7953 Current A current_b: name: ADE7953 Current B power_factor_a: name: "ADE7953 Power Factor A" power_factor_b: name: "ADE7953 Power Factor B" apparent_power_a: name: "ADE7953 Apparent Power A" apparent_power_b: name: "ADE7953 Apparent Power B" active_power_a: name: ADE7953 Active Power A active_power_b: name: ADE7953 Active Power B reactive_power_a: name: "ADE7953 Reactive Power A" reactive_power_b: name: "ADE7953 Reactive Power B" update_interval: 1s - platform: ade7953_spi spi_id: spi_1 cs_pin: 04 irq_pin: 16 voltage: name: ADE7953 Voltage current_a: name: ADE7953 Current A current_b: name: ADE7953 Current B power_factor_a: name: "ADE7953 Power Factor A" power_factor_b: name: "ADE7953 Power Factor B" apparent_power_a: name: "ADE7953 Apparent Power A" apparent_power_b: name: "ADE7953 Apparent Power B" active_power_a: name: ADE7953 Active Power A active_power_b: name: ADE7953 Active Power B reactive_power_a: name: "ADE7953 Reactive Power A" reactive_power_b: name: "ADE7953 Reactive Power B" update_interval: 1s script: - id: automation_test then: - repeat: count: 5 then: - logger.log: looping! - id: zero_repeat_test then: - repeat: count: !lambda "return 0;" then: - logger.log: shouldn't see mee! switch: - platform: modbus_controller modbus_controller_id: modbus_controller_test id: modbus_switch_test register_type: coil address: 2 bitmask: 1 - platform: tm1638 id: Led0 led: 0 name: TM1638Led0 - platform: tm1638 id: Led1 led: 1 name: TM1638Led1 - platform: tm1638 id: Led2 led: 2 name: TM1638Led2 - platform: tm1638 id: Led3 led: 3 name: TM1638Led3 display: - platform: tm1638 id: primarydisplay stb_pin: 5 #TM1638 STB clk_pin: 18 #TM1638 CLK dio_pin: 23 #TM1638 DIO update_interval: 5s intensity: 5 lambda: |- it.print("81818181"); time: - platform: pcf85063 - platform: pcf8563 text_sensor: - platform: ezo_pmp dosing_mode: name: Dosing Mode calibration_status: name: Calibration Status on_value: - ezo_pmp.dose_volume: id: hcl_pump volume: 10 - ezo_pmp.dose_volume_over_time: id: hcl_pump volume: 10 duration: 2 - ezo_pmp.dose_with_constant_flow_rate: id: hcl_pump volume_per_minute: 10 duration: 2 - ezo_pmp.set_calibration_volume: id: hcl_pump volume: 10 - ezo_pmp.find: hcl_pump - ezo_pmp.dose_continuously: hcl_pump - ezo_pmp.clear_total_volume_dosed: hcl_pump - ezo_pmp.clear_calibration: hcl_pump - ezo_pmp.pause_dosing: hcl_pump - ezo_pmp.stop_dosing: hcl_pump - ezo_pmp.arbitrary_command: id: hcl_pump command: D,? sn74hc165: id: sn74hc165_hub data_pin: GPIO12 clock_pin: GPIO14 load_pin: GPIO27 clock_inhibit_pin: GPIO26 sr_count: 4 matrix_keypad: id: keypad rows: - pin: 21 - pin: 19 columns: - pin: 17 - pin: 16 keys: "1234" key_collector: - id: reader source_id: keypad min_length: 4 max_length: 4 light: - platform: esp32_rmt_led_strip id: led_strip pin: 13 num_leds: 60 rmt_channel: 6 rgb_order: GRB chipset: ws2812 - platform: esp32_rmt_led_strip id: led_strip2 pin: 15 num_leds: 60 rmt_channel: 2 rgb_order: RGB bit0_high: 100us bit0_low: 100us bit1_high: 100us bit1_low: 100us