mirror of https://github.com/esphome/esphome.git
86 lines
2.8 KiB
C++
86 lines
2.8 KiB
C++
#include "sht3xd.h"
|
|
#include "esphome/core/log.h"
|
|
|
|
namespace esphome {
|
|
namespace sht3xd {
|
|
|
|
static const char *const TAG = "sht3xd";
|
|
|
|
// use read serial number register with clock stretching disabled as per other SHT3XD_COMMAND registers
|
|
// which provides support for SHT85 sensor
|
|
// SHT85 does not support clock stretching and uses same registers as SHT3xd with clock stretching disabled
|
|
static const uint16_t SHT3XD_COMMAND_READ_SERIAL_NUMBER = 0x3682;
|
|
|
|
static const uint16_t SHT3XD_COMMAND_READ_STATUS = 0xF32D;
|
|
static const uint16_t SHT3XD_COMMAND_CLEAR_STATUS = 0x3041;
|
|
static const uint16_t SHT3XD_COMMAND_HEATER_ENABLE = 0x306D;
|
|
static const uint16_t SHT3XD_COMMAND_HEATER_DISABLE = 0x3066;
|
|
static const uint16_t SHT3XD_COMMAND_SOFT_RESET = 0x30A2;
|
|
static const uint16_t SHT3XD_COMMAND_POLLING_H = 0x2400;
|
|
static const uint16_t SHT3XD_COMMAND_FETCH_DATA = 0xE000;
|
|
|
|
void SHT3XDComponent::setup() {
|
|
ESP_LOGCONFIG(TAG, "Setting up SHT3xD...");
|
|
uint16_t raw_serial_number[2];
|
|
if (!this->get_register(SHT3XD_COMMAND_READ_SERIAL_NUMBER, raw_serial_number, 2)) {
|
|
this->mark_failed();
|
|
return;
|
|
}
|
|
this->serial_number_ = (uint32_t(raw_serial_number[0]) << 16) | uint32_t(raw_serial_number[1]);
|
|
|
|
if (!this->write_command(heater_enabled_ ? SHT3XD_COMMAND_HEATER_ENABLE : SHT3XD_COMMAND_HEATER_DISABLE)) {
|
|
this->mark_failed();
|
|
return;
|
|
}
|
|
}
|
|
|
|
void SHT3XDComponent::dump_config() {
|
|
ESP_LOGCONFIG(TAG, "SHT3xD:");
|
|
if (this->is_failed()) {
|
|
ESP_LOGE(TAG, " Communication with SHT3xD failed!");
|
|
return;
|
|
}
|
|
ESP_LOGD(TAG, " Serial Number: 0x%08" PRIX32, this->serial_number_);
|
|
ESP_LOGD(TAG, " Heater Enabled: %s", this->heater_enabled_ ? "true" : "false");
|
|
|
|
LOG_I2C_DEVICE(this);
|
|
LOG_UPDATE_INTERVAL(this);
|
|
|
|
LOG_SENSOR(" ", "Temperature", this->temperature_sensor_);
|
|
LOG_SENSOR(" ", "Humidity", this->humidity_sensor_);
|
|
}
|
|
|
|
float SHT3XDComponent::get_setup_priority() const { return setup_priority::DATA; }
|
|
|
|
void SHT3XDComponent::update() {
|
|
if (this->status_has_warning()) {
|
|
ESP_LOGD(TAG, "Retrying to reconnect the sensor.");
|
|
this->write_command(SHT3XD_COMMAND_SOFT_RESET);
|
|
}
|
|
if (!this->write_command(SHT3XD_COMMAND_POLLING_H)) {
|
|
this->status_set_warning();
|
|
return;
|
|
}
|
|
|
|
this->set_timeout(50, [this]() {
|
|
uint16_t raw_data[2];
|
|
if (!this->read_data(raw_data, 2)) {
|
|
this->status_set_warning();
|
|
return;
|
|
}
|
|
|
|
float temperature = 175.0f * float(raw_data[0]) / 65535.0f - 45.0f;
|
|
float humidity = 100.0f * float(raw_data[1]) / 65535.0f;
|
|
|
|
ESP_LOGD(TAG, "Got temperature=%.2f°C humidity=%.2f%%", temperature, humidity);
|
|
if (this->temperature_sensor_ != nullptr)
|
|
this->temperature_sensor_->publish_state(temperature);
|
|
if (this->humidity_sensor_ != nullptr)
|
|
this->humidity_sensor_->publish_state(humidity);
|
|
this->status_clear_warning();
|
|
});
|
|
}
|
|
|
|
} // namespace sht3xd
|
|
} // namespace esphome
|