esphome/esphomeyaml/components/sensor/hlw8012.py
2018-09-25 10:30:45 +02:00

58 lines
2.4 KiB
Python

import voluptuous as vol
import esphomeyaml.config_validation as cv
from esphomeyaml import pins
from esphomeyaml.components import sensor
from esphomeyaml.const import CONF_CF1_PIN, CONF_CF_PIN, CONF_CHANGE_MODE_EVERY, CONF_CURRENT, \
CONF_CURRENT_RESISTOR, CONF_ID, CONF_NAME, CONF_POWER, CONF_SEL_PIN, CONF_UPDATE_INTERVAL, \
CONF_VOLTAGE, CONF_VOLTAGE_DIVIDER
from esphomeyaml.helpers import App, Pvariable, add, gpio_output_pin_expression
HLW8012Component = sensor.sensor_ns.HLW8012Component
HLW8012VoltageSensor = sensor.sensor_ns.HLW8012VoltageSensor
HLW8012CurrentSensor = sensor.sensor_ns.HLW8012CurrentSensor
HLW8012PowerSensor = sensor.sensor_ns.HLW8012PowerSensor
PLATFORM_SCHEMA = vol.All(sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(HLW8012Component),
vol.Required(CONF_SEL_PIN): pins.gpio_output_pin_schema,
vol.Required(CONF_CF_PIN): pins.input_pin,
vol.Required(CONF_CF1_PIN): pins.input_pin,
vol.Optional(CONF_VOLTAGE): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_CURRENT): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_POWER): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_CURRENT_RESISTOR): cv.resistance,
vol.Optional(CONF_VOLTAGE_DIVIDER): cv.positive_float,
vol.Optional(CONF_CHANGE_MODE_EVERY): vol.All(cv.uint32_t, vol.Range(min=1)),
vol.Optional(CONF_UPDATE_INTERVAL): cv.update_interval,
}), cv.has_at_least_one_key(CONF_VOLTAGE, CONF_CURRENT, CONF_POWER))
def to_code(config):
sel = None
for sel in gpio_output_pin_expression(config[CONF_SEL_PIN]):
yield
rhs = App.make_hlw8012(sel, config[CONF_CF_PIN], config[CONF_CF1_PIN],
config.get(CONF_UPDATE_INTERVAL))
hlw = Pvariable(config[CONF_ID], rhs)
if CONF_VOLTAGE in config:
conf = config[CONF_VOLTAGE]
sensor.register_sensor(hlw.make_voltage_sensor(conf[CONF_NAME]), conf)
if CONF_CURRENT in config:
conf = config[CONF_CURRENT]
sensor.register_sensor(hlw.make_current_sensor(conf[CONF_NAME]), conf)
if CONF_POWER in config:
conf = config[CONF_POWER]
sensor.register_sensor(hlw.make_power_sensor(conf[CONF_NAME]), conf)
if CONF_CURRENT_RESISTOR in config:
add(hlw.set_current_resistor(config[CONF_CURRENT_RESISTOR]))
if CONF_CHANGE_MODE_EVERY in config:
add(hlw.set_change_mode_every(config[CONF_CHANGE_MODE_EVERY]))
BUILD_FLAGS = '-DUSE_HLW8012'