mirror of
https://github.com/esphome/esphome.git
synced 2024-12-21 16:27:44 +01:00
228 lines
9.1 KiB
C++
228 lines
9.1 KiB
C++
#include "as3935.h"
|
|
#include "esphome/core/log.h"
|
|
|
|
namespace esphome {
|
|
namespace as3935 {
|
|
|
|
static const char *const TAG = "as3935";
|
|
|
|
void AS3935Component::setup() {
|
|
ESP_LOGCONFIG(TAG, "Setting up AS3935...");
|
|
|
|
this->irq_pin_->setup();
|
|
LOG_PIN(" IRQ Pin: ", this->irq_pin_);
|
|
|
|
// Write properties to sensor
|
|
this->write_indoor(this->indoor_);
|
|
this->write_noise_level(this->noise_level_);
|
|
this->write_watchdog_threshold(this->watchdog_threshold_);
|
|
this->write_spike_rejection(this->spike_rejection_);
|
|
this->write_lightning_threshold(this->lightning_threshold_);
|
|
this->write_mask_disturber(this->mask_disturber_);
|
|
this->write_div_ratio(this->div_ratio_);
|
|
this->write_capacitance(this->capacitance_);
|
|
}
|
|
|
|
void AS3935Component::dump_config() {
|
|
ESP_LOGCONFIG(TAG, "AS3935:");
|
|
LOG_PIN(" Interrupt Pin: ", this->irq_pin_);
|
|
LOG_BINARY_SENSOR(" ", "Thunder alert", this->thunder_alert_binary_sensor_);
|
|
LOG_SENSOR(" ", "Distance", this->distance_sensor_);
|
|
LOG_SENSOR(" ", "Lightning energy", this->energy_sensor_);
|
|
}
|
|
|
|
float AS3935Component::get_setup_priority() const { return setup_priority::DATA; }
|
|
|
|
void AS3935Component::loop() {
|
|
if (!this->irq_pin_->digital_read())
|
|
return;
|
|
|
|
uint8_t int_value = this->read_interrupt_register_();
|
|
if (int_value == NOISE_INT) {
|
|
ESP_LOGI(TAG, "Noise was detected - try increasing the noise level value!");
|
|
} else if (int_value == DISTURBER_INT) {
|
|
ESP_LOGI(TAG, "Disturber was detected - try increasing the spike rejection value!");
|
|
} else if (int_value == LIGHTNING_INT) {
|
|
ESP_LOGI(TAG, "Lightning has been detected!");
|
|
if (this->thunder_alert_binary_sensor_ != nullptr)
|
|
this->thunder_alert_binary_sensor_->publish_state(true);
|
|
uint8_t distance = this->get_distance_to_storm_();
|
|
if (this->distance_sensor_ != nullptr)
|
|
this->distance_sensor_->publish_state(distance);
|
|
uint32_t energy = this->get_lightning_energy_();
|
|
if (this->energy_sensor_ != nullptr)
|
|
this->energy_sensor_->publish_state(energy);
|
|
}
|
|
this->thunder_alert_binary_sensor_->publish_state(false);
|
|
}
|
|
|
|
void AS3935Component::write_indoor(bool indoor) {
|
|
ESP_LOGV(TAG, "Setting indoor to %d", indoor);
|
|
if (indoor) {
|
|
this->write_register(AFE_GAIN, GAIN_MASK, INDOOR, 1);
|
|
} else {
|
|
this->write_register(AFE_GAIN, GAIN_MASK, OUTDOOR, 1);
|
|
}
|
|
}
|
|
// REG0x01, bits[3:0], manufacturer default: 0010 (2).
|
|
// This setting determines the threshold for events that trigger the
|
|
// IRQ Pin.
|
|
void AS3935Component::write_watchdog_threshold(uint8_t watchdog_threshold) {
|
|
ESP_LOGV(TAG, "Setting watchdog sensitivity to %d", watchdog_threshold);
|
|
if ((watchdog_threshold < 1) || (watchdog_threshold > 10)) // 10 is the max sensitivity setting
|
|
return;
|
|
this->write_register(THRESHOLD, THRESH_MASK, watchdog_threshold, 0);
|
|
}
|
|
|
|
// REG0x01, bits [6:4], manufacturer default: 010 (2).
|
|
// The noise floor level is compared to a known reference voltage. If this
|
|
// level is exceeded the chip will issue an interrupt to the IRQ pin,
|
|
// broadcasting that it can not operate properly due to noise (INT_NH).
|
|
// Check datasheet for specific noise level tolerances when setting this register.
|
|
void AS3935Component::write_noise_level(uint8_t noise_level) {
|
|
ESP_LOGV(TAG, "Setting noise level to %d", noise_level);
|
|
if ((noise_level < 1) || (noise_level > 7))
|
|
return;
|
|
|
|
this->write_register(THRESHOLD, NOISE_FLOOR_MASK, noise_level, 4);
|
|
}
|
|
// REG0x02, bits [3:0], manufacturer default: 0010 (2).
|
|
// This setting, like the watchdog threshold, can help determine between false
|
|
// events and actual lightning. The shape of the spike is analyzed during the
|
|
// chip's signal validation routine. Increasing this value increases robustness
|
|
// at the cost of sensitivity to distant events.
|
|
void AS3935Component::write_spike_rejection(uint8_t spike_rejection) {
|
|
ESP_LOGV(TAG, "Setting spike rejection to %d", spike_rejection);
|
|
if ((spike_rejection < 1) || (spike_rejection > 11))
|
|
return;
|
|
|
|
this->write_register(LIGHTNING_REG, SPIKE_MASK, spike_rejection, 0);
|
|
}
|
|
// REG0x02, bits [5:4], manufacturer default: 0 (single lightning strike).
|
|
// The number of lightning events before IRQ is set high. 15 minutes is The
|
|
// window of time before the number of detected lightning events is reset.
|
|
// The number of lightning strikes can be set to 1,5,9, or 16.
|
|
void AS3935Component::write_lightning_threshold(uint8_t lightning_threshold) {
|
|
ESP_LOGV(TAG, "Setting lightning threshold to %d", lightning_threshold);
|
|
switch (lightning_threshold) {
|
|
case 1:
|
|
this->write_register(LIGHTNING_REG, ((1 << 5) | (1 << 4)), 0, 4); // Demonstrative
|
|
break;
|
|
case 5:
|
|
this->write_register(LIGHTNING_REG, ((1 << 5) | (1 << 4)), 1, 4);
|
|
break;
|
|
case 9:
|
|
this->write_register(LIGHTNING_REG, ((1 << 5) | (1 << 4)), 1, 5);
|
|
break;
|
|
case 16:
|
|
this->write_register(LIGHTNING_REG, ((1 << 5) | (1 << 4)), 3, 4);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
// REG0x03, bit [5], manufacturer default: 0.
|
|
// This setting will return whether or not disturbers trigger the IRQ Pin.
|
|
void AS3935Component::write_mask_disturber(bool enabled) {
|
|
ESP_LOGV(TAG, "Setting mask disturber to %d", enabled);
|
|
if (enabled) {
|
|
this->write_register(INT_MASK_ANT, (1 << 5), 1, 5);
|
|
} else {
|
|
this->write_register(INT_MASK_ANT, (1 << 5), 0, 5);
|
|
}
|
|
}
|
|
// REG0x03, bit [7:6], manufacturer default: 0 (16 division ratio).
|
|
// The antenna is designed to resonate at 500kHz and so can be tuned with the
|
|
// following setting. The accuracy of the antenna must be within 3.5 percent of
|
|
// that value for proper signal validation and distance estimation.
|
|
void AS3935Component::write_div_ratio(uint8_t div_ratio) {
|
|
ESP_LOGV(TAG, "Setting div ratio to %d", div_ratio);
|
|
switch (div_ratio) {
|
|
case 16:
|
|
this->write_register(INT_MASK_ANT, ((1 << 7) | (1 << 6)), 0, 6);
|
|
break;
|
|
case 22:
|
|
this->write_register(INT_MASK_ANT, ((1 << 7) | (1 << 6)), 1, 6);
|
|
break;
|
|
case 64:
|
|
this->write_register(INT_MASK_ANT, ((1 << 7) | (1 << 6)), 1, 7);
|
|
break;
|
|
case 128:
|
|
this->write_register(INT_MASK_ANT, ((1 << 7) | (1 << 6)), 3, 6);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
// REG0x08, bits [3:0], manufacturer default: 0.
|
|
// This setting will add capacitance to the series RLC antenna on the product
|
|
// to help tune its resonance. The datasheet specifies being within 3.5 percent
|
|
// of 500kHz to get optimal lightning detection and distance sensing.
|
|
// It's possible to add up to 120pF in steps of 8pF to the antenna.
|
|
void AS3935Component::write_capacitance(uint8_t capacitance) {
|
|
ESP_LOGV(TAG, "Setting tune cap to %d pF", capacitance * 8);
|
|
this->write_register(FREQ_DISP_IRQ, CAP_MASK, capacitance, 0);
|
|
}
|
|
|
|
// REG0x03, bits [3:0], manufacturer default: 0.
|
|
// When there is an event that exceeds the watchdog threshold, the register is written
|
|
// with the type of event. This consists of two messages: INT_D (disturber detected) and
|
|
// INT_L (Lightning detected). A third interrupt INT_NH (noise level too HIGH)
|
|
// indicates that the noise level has been exceeded and will persist until the
|
|
// noise has ended. Events are active HIGH. There is a one second window of time to
|
|
// read the interrupt register after lightning is detected, and 1.5 after
|
|
// disturber.
|
|
uint8_t AS3935Component::read_interrupt_register_() {
|
|
// A 2ms delay is added to allow for the memory register to be populated
|
|
// after the interrupt pin goes HIGH. See "Interrupt Management" in
|
|
// datasheet.
|
|
ESP_LOGV(TAG, "Calling read_interrupt_register_");
|
|
delay(2);
|
|
return this->read_register_(INT_MASK_ANT, INT_MASK);
|
|
}
|
|
|
|
// REG0x02, bit [6], manufacturer default: 1.
|
|
// This register clears the number of lightning strikes that has been read in
|
|
// the last 15 minute block.
|
|
void AS3935Component::clear_statistics_() {
|
|
// Write high, then low, then high to clear.
|
|
ESP_LOGV(TAG, "Calling clear_statistics_");
|
|
this->write_register(LIGHTNING_REG, (1 << 6), 1, 6);
|
|
this->write_register(LIGHTNING_REG, (1 << 6), 0, 6);
|
|
this->write_register(LIGHTNING_REG, (1 << 6), 1, 6);
|
|
}
|
|
|
|
// REG0x07, bit [5:0], manufacturer default: 0.
|
|
// This register holds the distance to the front of the storm and not the
|
|
// distance to a lightning strike.
|
|
uint8_t AS3935Component::get_distance_to_storm_() {
|
|
ESP_LOGV(TAG, "Calling get_distance_to_storm_");
|
|
return this->read_register_(DISTANCE, DISTANCE_MASK);
|
|
}
|
|
|
|
uint32_t AS3935Component::get_lightning_energy_() {
|
|
ESP_LOGV(TAG, "Calling get_lightning_energy_");
|
|
uint32_t pure_light = 0; // Variable for lightning energy which is just a pure number.
|
|
uint32_t temp = 0;
|
|
// Temp variable for lightning energy.
|
|
temp = this->read_register_(ENERGY_LIGHT_MMSB, ENERGY_MASK);
|
|
// Temporary Value is large enough to handle a shift of 16 bits.
|
|
pure_light = temp << 16;
|
|
temp = this->read_register(ENERGY_LIGHT_MSB);
|
|
// Temporary value is large enough to handle a shift of 8 bits.
|
|
pure_light |= temp << 8;
|
|
// No shift here, directly OR'ed into pure_light variable.
|
|
temp = this->read_register(ENERGY_LIGHT_LSB);
|
|
pure_light |= temp;
|
|
return pure_light;
|
|
}
|
|
|
|
uint8_t AS3935Component::read_register_(uint8_t reg, uint8_t mask) {
|
|
uint8_t value = this->read_register(reg);
|
|
value &= (~mask);
|
|
return value;
|
|
}
|
|
|
|
} // namespace as3935
|
|
} // namespace esphome
|