esphome/tests/test4.yaml

255 lines
5.4 KiB
YAML

esphome:
name: $devicename
platform: ESP32
board: nodemcu-32s
build_path: build/test4
substitutions:
devicename: test-4
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO25
clk_mode: GPIO0_IN
phy_addr: 0
power_pin: GPIO25
manual_ip:
static_ip: 192.168.178.56
gateway: 192.168.178.1
subnet: 255.255.255.0
domain: .local
api:
i2c:
sda: 21
scl: 22
scan: False
spi:
clk_pin: GPIO21
mosi_pin: GPIO22
miso_pin: GPIO23
uart:
tx_pin: GPIO22
rx_pin: GPIO23
baud_rate: 115200
ota:
safe_mode: True
port: 3286
logger:
level: DEBUG
web_server:
auth:
username: admin
password: admin
time:
- platform: sntp
id: sntp_time
tuya:
time_id: sntp_time
sensor:
- platform: homeassistant
entity_id: sensor.hello_world
id: ha_hello_world
- platform: tuya
id: tuya_sensor
sensor_datapoint: 1
- platform: "hrxl_maxsonar_wr"
name: "Rainwater Tank Level"
filters:
- sliding_window_moving_average:
window_size: 12
send_every: 12
- or:
- throttle: "20min"
- delta: 0.02
#
# platform sensor.apds9960 requires component apds9960
#
# - platform: apds9960
# type: proximity
# name: APDS9960 Proximity
# - platform: apds9960
# type: clear
# name: APDS9960 Clear
# - platform: apds9960
# type: red
# name: APDS9960 Red
# - platform: apds9960
# type: green
# name: APDS9960 Green
# - platform: apds9960
# type: blue
# name: APDS9960 Blue
binary_sensor:
- platform: tuya
id: tuya_binary_sensor
sensor_datapoint: 1
- platform: template
id: ar1
lambda: 'return {};'
filters:
- autorepeat:
- delay: 2s
time_off: 100ms
time_on: 900ms
- delay: 4s
time_off: 100ms
time_on: 400ms
on_state:
then:
- lambda: 'ESP_LOGI("ar1:", "%d", x);'
- platform: xpt2046
xpt2046_id: touchscreen
id: touch_key0
x_min: 80
x_max: 160
y_min: 106
y_max: 212
on_state:
- lambda: 'ESP_LOGI("main", "key0: %s", (x ? "touch" : "release"));'
climate:
- platform: tuya
id: tuya_climate
switch_datapoint: 1
target_temperature_datapoint: 3
current_temperature_multiplier: 0.5
target_temperature_multiplier: 0.5
switch:
- platform: tuya
id: tuya_switch
switch_datapoint: 1
light:
- platform: fastled_clockless
id: led_matrix_32x8
name: "led_matrix_32x8"
chipset: WS2812B
pin: GPIO15
num_leds: 256
rgb_order: GRB
default_transition_length: 0s
color_correct: [50%, 50%, 50%]
- platform: tuya
id: tuya_light
switch_datapoint: 1
dimmer_datapoint: 2
min_value_datapoint: 3
color_temperature_datapoint: 4
min_value: 1
max_value: 100
cold_white_color_temperature: 153 mireds
warm_white_color_temperature: 500 mireds
gamma_correct: 1
display:
- platform: addressable_light
id: led_matrix_32x8_display
addressable_light_id: led_matrix_32x8
width: 32
height: 8
pixel_mapper: |-
if (x % 2 == 0) {
return (x * 8) + y;
}
return (x * 8) + (7 - y);
lambda: |-
Color red = Color(0xFF0000);
Color green = Color(0x00FF00);
Color blue = Color(0x0000FF);
it.rectangle(0, 0, it.get_width(), it.get_height(), red);
it.rectangle(1, 1, it.get_width()-2, it.get_height()-2, green);
it.rectangle(2, 2, it.get_width()-4, it.get_height()-4, blue);
it.rectangle(3, 3, it.get_width()-6, it.get_height()-6, red);
rotation: 0°
update_interval: 16ms
- platform: waveshare_epaper
cs_pin: GPIO23
dc_pin: GPIO23
busy_pin: GPIO23
reset_pin: GPIO23
model: 2.13in-ttgo-b1
full_update_every: 30
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: waveshare_epaper
cs_pin: GPIO23
dc_pin: GPIO23
busy_pin: GPIO23
reset_pin: GPIO23
model: 2.90in
full_update_every: 30
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: waveshare_epaper
cs_pin: GPIO23
dc_pin: GPIO23
busy_pin: GPIO23
reset_pin: GPIO23
model: 2.90inv2
full_update_every: 30
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
esp32_camera:
name: ESP-32 Camera
data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19]
vsync_pin: GPIO22
href_pin: GPIO26
pixel_clock_pin: GPIO21
external_clock:
pin: GPIO27
frequency: 20MHz
i2c_pins:
sda: GPIO25
scl: GPIO23
reset_pin: GPIO15
power_down_pin: GPIO1
resolution: 640x480
jpeg_quality: 10
external_components:
- source: github://esphome/esphome@dev
refresh: 1d
components: ["bh1750"]
- source: ../esphome/components
components: ["sntp"]
xpt2046:
id: touchscreen
cs_pin: 17
irq_pin: 16
update_interval: 50ms
report_interval: 1s
threshold: 400
dimension_x: 240
dimension_y: 320
calibration_x_min: 3860
calibration_x_max: 280
calibration_y_min: 340
calibration_y_max: 3860
swap_x_y: False
on_state:
- lambda: |-
ESP_LOGI("main", "args x=%d, y=%d, touched=%s", x, y, (touched ? "touch" : "release"));
ESP_LOGI("main", "member x=%d, y=%d, touched=%d, x_raw=%d, y_raw=%d, z_raw=%d",
id(touchscreen).x,
id(touchscreen).y,
(int) id(touchscreen).touched,
id(touchscreen).x_raw,
id(touchscreen).y_raw,
id(touchscreen).z_raw
);