esphome/tests/test2.yaml
2020-08-06 17:08:48 +02:00

334 lines
8.0 KiB
YAML

esphome:
name: $devicename
platform: ESP32
board: nodemcu-32s
build_path: build/test2
substitutions:
devicename: test2
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO25
clk_mode: GPIO0_IN
phy_addr: 0
power_pin: GPIO25
manual_ip:
static_ip: 192.168.178.56
gateway: 192.168.178.1
subnet: 255.255.255.0
domain: .local
api:
i2c:
sda: 21
scl: 22
scan: False
spi:
clk_pin: GPIO21
mosi_pin: GPIO22
miso_pin: GPIO23
uart:
tx_pin: GPIO22
rx_pin: GPIO23
baud_rate: 115200
ota:
safe_mode: True
port: 3286
logger:
level: DEBUG
as3935_i2c:
irq_pin: GPIO12
sensor:
- platform: homeassistant
entity_id: sensor.hello_world
id: ha_hello_world
- platform: ble_rssi
mac_address: AC:37:43:77:5F:4C
name: "BLE Google Home Mini RSSI value"
- platform: ble_rssi
service_uuid: '11aa'
name: "BLE Test Service 16"
- platform: ble_rssi
service_uuid: '11223344'
name: "BLE Test Service 32"
- platform: ble_rssi
service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
name: "BLE Test Service 128"
- platform: ruuvitag
mac_address: FF:56:D3:2F:7D:E8
humidity:
name: "RuuviTag Humidity"
temperature:
name: "RuuviTag Temperature"
pressure:
name: "RuuviTag Pressure"
acceleration_x:
name: "RuuviTag Acceleration X"
acceleration_y:
name: "RuuviTag Acceleration Y"
acceleration_z:
name: "RuuviTag Acceleration Z"
battery_voltage:
name: "RuuviTag Battery Voltage"
tx_power:
name: "RuuviTag TX Power"
movement_counter:
name: "RuuviTag Movement Counter"
measurement_sequence_number:
name: "RuuviTag Measurement Sequence Number"
- platform: as3935
lightning_energy:
name: "Lightning Energy"
distance:
name: "Distance Storm"
- platform: xiaomi_hhccjcy01
mac_address: 94:2B:FF:5C:91:61
temperature:
name: "Xiaomi HHCCJCY01 Temperature"
moisture:
name: "Xiaomi HHCCJCY01 Moisture"
illuminance:
name: "Xiaomi HHCCJCY01 Illuminance"
conductivity:
name: "Xiaomi HHCCJCY01 Soil Conductivity"
- platform: xiaomi_lywsdcgq
mac_address: 7A:80:8E:19:36:BA
temperature:
name: "Xiaomi LYWSDCGQ Temperature"
humidity:
name: "Xiaomi LYWSDCGQ Humidity"
battery_level:
name: "Xiaomi LYWSDCGQ Battery Level"
- platform: xiaomi_lywsd02
mac_address: 3F:5B:7D:82:58:4E
temperature:
name: "Xiaomi LYWSD02 Temperature"
humidity:
name: "Xiaomi LYWSD02 Humidity"
- platform: xiaomi_cgg1
mac_address: 7A:80:8E:19:36:BA
temperature:
name: "Xiaomi CGG1 Temperature"
humidity:
name: "Xiaomi CGG1 Humidity"
battery_level:
name: "Xiaomi CGG1 Battery Level"
- platform: xiaomi_gcls002
mac_address: "94:2B:FF:5C:91:61"
temperature:
name: "GCLS02 Temperature"
moisture:
name: "GCLS02 Moisture"
conductivity:
name: "GCLS02 Soil Conductivity"
illuminance:
name: "GCLS02 Illuminance"
- platform: xiaomi_hhccpot002
mac_address: "94:2B:FF:5C:91:61"
moisture:
name: "HHCCPOT002 Moisture"
conductivity:
name: "HHCCPOT002 Soil Conductivity"
- platform: xiaomi_lywsd03mmc
mac_address: "A4:C1:38:4E:16:78"
bindkey: "e9efaa6873f9f9c87a5e75a5f814801c"
temperature:
name: "Xiaomi LYWSD03MMC Temperature"
humidity:
name: "Xiaomi LYWSD03MMC Humidity"
battery_level:
name: "Xiaomi LYWSD03MMC Battery Level"
- platform: xiaomi_cgd1
mac_address: "A4:C1:38:D1:61:7D"
bindkey: "c99d2313182473b38001086febf781bd"
temperature:
name: "Xiaomi CGD1 Temperature"
humidity:
name: "Xiaomi CGD1 Humidity"
battery_level:
name: "Xiaomi CGD1 Battery Level"
- platform: xiaomi_jqjcy01ym
mac_address: "7A:80:8E:19:36:BA"
temperature:
name: "JQJCY01YM Temperature"
humidity:
name: "JQJCY01YM Humidity"
formaldehyde:
name: "JQJCY01YM Formaldehyde"
battery_level:
name: "JQJCY01YM Battery Level"
time:
- platform: homeassistant
on_time:
- at: '16:00:00'
then:
- logger.log: It's 16:00
esp32_touch:
setup_mode: True
binary_sensor:
- platform: homeassistant
entity_id: binary_sensor.hello_world
id: ha_hello_world_binary
- platform: ble_presence
mac_address: AC:37:43:77:5F:4C
name: "ESP32 BLE Tracker Google Home Mini"
- platform: ble_presence
service_uuid: '11aa'
name: "BLE Test Service 16 Presence"
- platform: ble_presence
service_uuid: '11223344'
name: "BLE Test Service 32 Presence"
- platform: ble_presence
service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
name: "BLE Test Service 128 Presence"
- platform: esp32_touch
name: "ESP32 Touch Pad GPIO27"
pin: GPIO27
threshold: 1000
- platform: as3935
name: "Storm Alert"
- platform: xiaomi_mue4094rt
name: "MUE4094RT Motion"
mac_address: "7A:80:8E:19:36:BA"
timeout: "5s"
- platform: xiaomi_mjyd02yla
name: "MJYD02YL-A Motion"
mac_address: "50:EC:50:CD:32:02"
bindkey: "48403ebe2d385db8d0c187f81e62cb64"
idle_time:
name: "MJYD02YL-A Idle Time"
light:
name: "MJYD02YL-A Light Status"
battery_level:
name: "MJYD02YL-A Battery Level"
- platform: xiaomi_wx08zm
name: "WX08ZM Activation State"
mac_address: "74:a3:4a:b5:07:34"
tablet:
name: "WX08ZM Tablet Resource"
battery_level:
name: "WX08ZM Battery Level"
esp32_ble_tracker:
on_ble_advertise:
- mac_address: AC:37:43:77:5F:4C
then:
- lambda: !lambda |-
ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
- then:
- lambda: !lambda |-
ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
on_ble_service_data_advertise:
- service_uuid: ABCD
then:
- lambda: !lambda |-
ESP_LOGD("main", "Length of service data is %i", x.size());
on_ble_manufacturer_data_advertise:
- manufacturer_id: ABCD
then:
- lambda: !lambda |-
ESP_LOGD("main", "Length of manufacturer data is %i", x.size());
#esp32_ble_beacon:
# type: iBeacon
# uuid: 'c29ce823-e67a-4e71-bff2-abaa32e77a98'
status_led:
pin: GPIO2
text_sensor:
- platform: version
name: "ESPHome Version"
icon: mdi:icon
id: version_sensor
on_value:
- if:
condition:
- api.connected:
then:
- lambda: !lambda |-
ESP_LOGD("main", "The state is %s=%s", x.c_str(), id(version_sensor).state.c_str());
- script.execute: my_script
- homeassistant.service:
service: notify.html5
data:
title: New Humidity
data_template:
message: The humidity is {{ my_variable }}%.
variables:
my_variable: |-
return id(version_sensor).state;
my_variable_str: |-
return "Hello World";
- homeassistant.service:
service: light.turn_on
data:
entity_id: light.my_light
- platform: template
name: "Template Text Sensor"
lambda: |-
return {"Hello World"};
- platform: homeassistant
entity_id: sensor.hello_world2
id: ha_hello_world2
- platform: ble_scanner
name: Scanner
script:
- id: my_script
mode: single
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
- id: my_script_queued
mode: queued
max_runs: 2
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
- id: my_script_parallel
mode: parallel
max_runs: 2
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
- id: my_script_restart
mode: restart
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
stepper:
- platform: uln2003
id: my_stepper
pin_a: GPIO23
pin_b: GPIO27
pin_c: GPIO25
pin_d: GPIO26
sleep_when_done: no
step_mode: HALF_STEP
max_speed: 250 steps/s
# Optional:
acceleration: inf
deceleration: inf
interval:
interval: 5s
then:
- logger.log: "Interval Run"
display: