harbor/docs/1.10/install_config/installation_prereqs.md

45 lines
1.7 KiB
Markdown
Raw Normal View History

2019-12-20 18:49:09 +01:00
[Back to table of contents](../index.md)
2019-12-18 15:38:10 +01:00
----------
# Harbor Installation Prerequisites
Harbor is deployed as several Docker containers. You can therefore deploy it on any Linux distribution that supports Docker. The target host requires Docker, and Docker Compose to be installed.
### Hardware
The following table lists the minimum and recommended hardware configurations for deploying Harbor.
|Resource|Minimum|Recommended|
|---|---|---|
|CPU|2 CPU|4 CPU|
|Mem|4 GB|8 GB|
|Disk|40 GB|160 GB|
### Software
The following table lists the software versions that must be installed on the target host.
|Software|Version|Description|
|---|---|---|
|Docker engine|Version 17.06.0-ce+ or higher|For installation instructions, see [Docker Engine documentation](https://docs.docker.com/engine/installation/)|
|Docker Compose|Version 1.18.0 or higher|For installation instructions, see [Docker Compose documentation](https://docs.docker.com/compose/install/)|
|Openssl|Latest is preferred|Used to generate certificate and keys for Harbor|
### Network ports
Harbor requires that the following ports be open on the target host.
|Port|Protocol|Description|
|---|---|---|
|443|HTTPS|Harbor portal and core API accept HTTPS requests on this port. You can change this port in the configuration file.|
|4443|HTTPS|Connections to the Docker Content Trust service for Harbor. Only required if Notary is enabled. You can change this port in the configuration file.|
|80|HTTP|Harbor portal and core API accept HTTP requests on this port. You can change this port in the configuration file.|
## What to Do Next ##
[Download the Harbor Installer](download_installer.md).
----------
2019-12-20 18:49:09 +01:00
[Back to table of contents](../index.md)