Merge pull request #5982 from SDBrett/docs

Documentation typo correction

docs/compile_guide.md

@@ -39,9 +39,9 @@ Edit the file **make/harbor.cfg** and make necessary configuration changes such
 
 You can compile the code by one of the three approaches:
 
-#### I. Build with offical Golang image
+#### I. Build with official Golang image
 
-* Get offcial Golang image from docker hub:
+* Get official Golang image from docker hub:
 
    ```sh
       $ docker pull golang:1.9.2

docs/installation_guide.md

@@ -18,16 +18,16 @@ Harbor is deployed as several Docker containers, and, therefore, can be deployed
 ### Hardware
 |Resource|Capacity|Description|
 |---|---|---|
-|CPU|minimal 2 CPU|4 CPU is prefered|
-|Mem|minimal 4GB|8GB is prefered|
-|Disk|minimal 40GB|160GB is prefered|
+|CPU|minimal 2 CPU|4 CPU is preferred|
+|Mem|minimal 4GB|8GB is preferred|
+|Disk|minimal 40GB|160GB is preferred|
 ### Software
 |Software|Version|Description|
 |---|---|---|
 |Python|version 2.7 or higher|Note that you may have to install Python on Linux distributions (Gentoo, Arch) that do not come with a Python interpreter installed by default|
 |Docker engine|version 1.10 or higher|For installation instructions, please refer to: https://docs.docker.com/engine/installation/|
 |Docker Compose|version 1.6.0 or higher|For installation instructions, please refer to: https://docs.docker.com/compose/install/|
-|Openssl|latest is prefered|Generate certificate and keys for Harbor|
+|Openssl|latest is preferred|Generate certificate and keys for Harbor|
 ### Network ports 
 |Port|Protocol|Description|
 |---|---|---|
@@ -327,7 +327,7 @@ proxy:
 hostname = 192.168.0.2:8888
 ```
 
-3.Re-deploy Harbor refering to previous section "Managing Harbor's lifecycle".
+3.Re-deploy Harbor referring to previous section "Managing Harbor's lifecycle".
 ### For HTTPS protocol
 1.Enable HTTPS in Harbor by following this [guide](https://github.com/goharbor/harbor/blob/master/docs/configure_https.md).  
 2.Modify docker-compose.yml  
@@ -360,7 +360,7 @@ proxy:
 hostname = 192.168.0.2:8888
 ```
 
-4.Re-deploy Harbor refering to previous section "Managing Harbor's lifecycle". 
+4.Re-deploy Harbor referring to previous section "Managing Harbor's lifecycle".
 
 
 ## Performance tuning

docs/kubernetes_deployment.md

@@ -93,7 +93,7 @@ If Basic Configuration was not covering your requirements, you can read this sec
 You can find all configs of Harbor in `make/kubernetes/templates/`. There are specifications of these files:
 
 - `jobservice.cm.yaml`: ENV and web config of jobservice
-- `mysql.cm.yaml`: Root passowrd of MySQL
+- `mysql.cm.yaml`: Root password of MySQL
 - `ingress.yaml`: Https certification and ingress config. If you are fimiliar with ingress, you can modify it.
 - `registry.cm.yaml`: Token service certification and registry config
   Registry use filesystem to store data of images. You can find it like:

docs/manage_role_by_ldap_group.md

@@ -15,7 +15,7 @@ This guide provides instructions to manage roles by LDAP/AD group. You can impor
 
 ## Configure LDAP group settings
 
-Besides **[basic LDAP configure paremters](https://github.com/vmware/harbor/blob/master/docs/installation_guide.md#optional-parameters)** , LDAP group related configure parameters should be configured, they can be configured before or after installation
+Besides **[basic LDAP configure parameters](https://github.com/vmware/harbor/blob/master/docs/installation_guide.md#optional-parameters)** , LDAP group related configure parameters should be configured, they can be configured before or after installation
 
   1. Configure parameters in harbor.cfg before installation
 

docs/migration_guide.md

@@ -28,7 +28,7 @@ When upgrading your existing Habor instance to a newer version, you may need to
     mv harbor /my_backup_dir/harbor
     ```
 
-3. Get the lastest Harbor release package from Github:
+3. Get the latest Harbor release package from Github:
    https://github.com/goharbor/harbor/releases
 
 4. Before upgrading Harbor, perform migration first.  The migration tool is delivered as a docker image, so you should pull the image from docker hub. Replace [tag] with the release version of Harbor (e.g. v1.5.0) in the below command:
@@ -83,7 +83,7 @@ When upgrading your existing Habor instance to a newer version, you may need to
     docker run -it --rm -v /data/clair-db/:/clair-db -v /data/database:/var/lib/postgresql/data goharbor/harbor-migrator:${tag} --db up
     ```
 
-    **NOTE:** The ${harbor_cfg} will be overwrited, you must move it to your installation directory after migration.
+    **NOTE:** The ${harbor_cfg} will be overwritten, you must move it to your installation directory after migration.
 
     ```
     docker run -it --rm -v ${harbor_cfg}:/harbor-migration/harbor-cfg/harbor.cfg goharbor/harbor-migrator:[tag] --cfg up

docs/upgradetest.md

@@ -10,13 +10,13 @@ This guide is for Harbor upgrade test
 4. Login harbor as usera, push an unsigned image into projecta, then push a signed image to projecta. 
 5. Login harbor as userc, push an unsigned image into projecta, then push a signed image to projeca.
 6. Login harbor as userd, push each image one time.   
-7. Repeate 4 5 6 to projectb and projectc.  
+7. Repeat 4 5 6 to projectb and projectc.
 8. Add one endpoint to harbor.  
 9. Add an immediate replication rule to projeca, a schedule rule to projectb, a manual rule to projectc, trigger each rule one time.  
 10. Add 5 system label syslabel1 to syslabel5 and tag syslabel1 and syslabel2 to all unsigned image.    
 11. In each project add 5 project label projlabela to projlabele, add projlabela projlabelb and projlabelc to signed image. 
 12. Trigger one scan all job to scan all images.(For clair enabled instance)  
-13. Update project publicly, content trust, severity and scaning settings.  
+13. Update project publicly, content trust, severity and scanning settings.
 14. Update Harbor email, token expire read only and scan settings.  
 15. Update repository info.   
 **NOTE**: Create user step is not needed if auth mode is LDAP.  

docs/use_notary.md

@@ -3,10 +3,10 @@ In harbor.cfg, make sure the attribute ```ui_url_protocol``` is set to ```https`
 
 ### Copy Root Certificate
 Suppose the Harbor instance is hosted on a machine ```192.168.0.5```
-If you are using a self-signed cetificate, make sure to copy the CA root cert to ```/etc/docker/certs.d/192.168.0.5/``` and ```~/.docker/tls/192.168.0.5:4443/```
+If you are using a self-signed certificate, make sure to copy the CA root cert to ```/etc/docker/certs.d/192.168.0.5/``` and ```~/.docker/tls/192.168.0.5:4443/```
 
 ### Enable Docker Content Trust
-It can be done via setting envrironment variables:
+It can be done via setting environment variables:
 
 ```
 export DOCKER_CONTENT_TRUST=1

docs/user_guide.md

@@ -82,7 +82,7 @@ After the project is created, you can browse repositories, members, logs, replic
 
 ![browse project](img/new_browse_project.png)
 
-There are two views to show repositories, listview and card view, you can switch between them by clicking the corresponding icon.
+There are two views to show repositories, list view and card view, you can switch between them by clicking the corresponding icon.
 
 ![browse repositories](img/browse_project_repositories.png)