# Installation Guide of Harbor ### Download the installation package Harbor can be installed from the source code by using "docker-compose up" command, which goes through a full build process. Besides, a pre-built installation package of each release can be downloaded from the [release page](https://github.com/vmware/harbor/releases). This guide describes the installation of Harbor by using the pre-built package. ### Prerequisites for target machine Harbor is deployed as several Docker containers. Hence, it can be deployed on any Linux distribution that supports Docker. Before deploying Harbor, the target machine requires Python, Docker, Docker Compose to be installed. * Python should be version 2.7 or higher. Some Linux distributions (Gentoo, Arch) may not have a Python interpreter installed by default. On those systems, you need to install Python manually. * The Docker engine should be version 1.8 or higher. For the details to install Docker engine, please refer to: https://docs.docker.com/engine/installation/ * The Docker Compose needs to be version 1.6.0 or higher. For the details to install Docker compose, please refer to: https://docs.docker.com/compose/install/ ### Configuration of Harbor After downloading the package file **harbor-<version>.tgz** from the release page, you need to extract files from the package. Before installing Harbor, you should configure the parameters in the file **harbor.cfg**. You then execute the **prepare** script to generate configuration files for Harbor's containers. Finally, you use Docker Compose to start Harbor. At minimum, you only need to change the **hostname** attribute in **harbor.cfg** by updating the IP address or the fully qualified domain name (FQDN) of your target machine, for example 192.168.1.10. Please see the next section for the description of each parameter. ``` $ tar -xzvf harbor-0.1.0.tgz $ cd harbor $ vi ./harbor.cfg ...... $ ./prepare Generated configuration file: ./config/ui/env Generated configuration file: ./config/ui/app.conf Generated configuration file: ./config/registry/config.yml Generated configuration file: ./config/db/env The configuration files are ready, please use docker-compose to start the service. $ sudo docker-compose up -d ...... ``` After that, you can open a browser and access Harbor via the IP you set in harbor.cfg, such as http://192.168.1.10 . The same IP address is used as the Registry address in your Docker client, for example: ```docker pull 192.168.1.10/library/ubuntu``` #### Parameters in harbor.cfg **hostname**: The endpoint for a user to access the user interface and the registry service, for example 192.168.1.10 or exampledomian.com. **ui_url_protocol**: The protocol for accessing the user interface and the token/notification service, by default it is http. **Email settings**: the following 5 attributes are used to send an email to reset a user's password, they are not mandatory unless the password reset function is needed in Harbor. * email_server = smtp.mydomain.com * email_server_port = 25 * email_username = sample_admin@mydomain.com * email_password = abc * email_from = admin **harbor_admin_password**: The password for the administrator of Harbor, by default the password is Harbor12345, the user name is admin. **auth_mode**: The authentication mode of Harbor. By default it is *db_auth*, i.e. the credentials are stored in a database. Please set it to *ldap_auth* if you want to verify user's credentials against an LDAP server. **ldap_url**: The URL for LDAP endpoint, for example ldaps://ldap.mydomain.com. It is only used when **auth_mode** is set to *ldap_auth*. **ldap_basedn**: The basedn template for verifying the user's credentials against LDAP, for example uid=%s,ou=people,dc=mydomain,dc=com. It is only used when **auth_mode** is set to *ldap_auth*. **db_password**: The password of root user of mySQL database. ### Deploy Harbor to a target machine that does not have Internet access When you run *docker-compose up* to start Harbor, it will pull base images from Docker Hub and build new images for the containers. This process requires accessing the Internet. If you want to deploy Harbor to a host that is not connected to the Internet, you need to prepare Harbor on a machine that has access to the Internet. After that, you export the images as tgz files and transfer them to the target machine, then load the tgz file into Docker's local image repo. #### Build and save images for offline installation On a machine that is connected to the Internet, extract files from the installation package. Then run command "docker-compose build" to build the images and use the script *save_image.sh* to export them as tar files. The tar files will be stored in **images** directory. Next, package everything in the directory **harbor** into a tgz file and transfer it to the target machine. This can be done by executing the following commands: ``` $ cd harbor $ sudo docker-compose build ...... $ sudo ./save_image.sh saving the image of harbor_ui finished saving the image of harbor_ui saving the image of harbor_log finished saving the image of harbor_log saving the image of harbor_mysql finished saving the image of harbor_mysql saving the image of nginx finished saving the image of nginx saving the image of registry finished saving the image of registry $ cd ../ $ tar -cvzf harbor_offline-0.1.0.tgz harbor ``` The package file **harbor_offline-0.1.0.tgz** contains the images saved by previously steps and the files required to start Harbor. You can use tools such as scp to transfer the file **harbor_offline-0.1.0.tgz** to the target machine that does not have Internet connection. On the target machine, you can execute the following commands to start Harbor. Again, before running the **prepare** script, be sure to update **harbor.cfg** to reflect the right configuration of the target machine. ``` $ tar -xzvf harbor_offline-0.1.tgz $ cd harbor # load images save by excute ./save_image.sh $ ./load_image.sh loading the image of harbor_ui finish loaded the image of harbor_ui loading the image of harbor_mysql finished loading the image of harbor_mysql loading the image of nginx finished loading the image of nginx loading the image of registry finished loading the image of registry # Make update to the parameters in ./harbor.cfg $ ./prepare Generated configuration file: ./config/ui/env Generated configuration file: ./config/ui/app.conf Generated configuration file: ./config/registry/config.yml Generated configuration file: ./config/db/env The configuration files are ready, please use docker-compose to start the service. # Build the images and then start the services $ sudo docker-compose up -d ``` ### Manage Harbor's lifecycle Harbor is composed of a few containers which are deployed via docker-compose, you can use docker-compose to manage the lifecycle of the containers. Below are a few useful commands: Build and start Harbor: ``` $ sudo docker-compose up -d Creating harbor_log_1 Creating harbor_mysql_1 Creating harbor_registry_1 Creating harbor_ui_1 Creating harbor_proxy_1 ``` Stop Harbor: ``` $ sudo docker-compose stop Stopping harbor_proxy_1 ... done Stopping harbor_ui_1 ... done Stopping harbor_registry_1 ... done Stopping harbor_mysql_1 ... done Stopping harbor_log_1 ... done ``` Restart Harbor after stopping ``` $ sudo docker-compose start Starting harbor_log_1 Starting harbor_mysql_1 Starting harbor_registry_1 Starting harbor_ui_1 Starting harbor_proxy_1 ```` Remove Harbor's containers (the image data and Harbor's database files remains on the file system): ``` $ sudo docker-compose rm Going to remove harbor_proxy_1, harbor_ui_1, harbor_registry_1, harbor_mysql_1, harbor_log_1 Are you sure? [yN] y Removing harbor_proxy_1 ... done Removing harbor_ui_1 ... done Removing harbor_registry_1 ... done Removing harbor_mysql_1 ... done ``` [Docker Compose command-line reference](https://docs.docker.com/compose/reference/) describes the usage information for the docker-compose subcommands. ### Persistent data and log files By default, the data of database and image files in the registry are persisted in the directory **/data/** of the target machine. When Harbor's containers are removed and recreated, the data remain unchanged. Harbor leverages rsyslog to collect the logs of each container, by default the log files are stored in the directory **/var/log/harbor/** on Harbor's host.