|
|
||
|---|---|---|
| .. | ||
| templates | ||
| .gitignore | ||
| .helmignore | ||
| Chart.yaml | ||
| CONTRIBUTING.md | ||
| README.md | ||
| requirements.lock | ||
| requirements.yaml | ||
| values.yaml | ||
Helm Chart for Harbor
Introduction
This Helm chart installs Harbor in a Kubernetes cluster. Currently this chart supports Harbor v1.4.0 release. Welcome to contribute to Helm Chart for Harbor.
Prerequisites
- Kubernetes cluster 1.8+ with Beta APIs enabled
- Kubernetes Ingress Controller is enabled
- kubectl CLI 1.8+
- Helm CLI 2.8.0+
Known Issues
- This chart doesn't work with Kubernetes security update release 1.8.9+ and 1.9.4+. Refer to issue 4496.
Setup a Kubernetes cluster
You can use any tools to setup a K8s cluster. In this guide, we use minikube 0.25.0 to setup a K8s cluster as the dev/test env.
# Start minikube
minikube start --vm-driver=none
# Enable Ingress Controller
minikube addons enable ingress
Installing the Chart
First install Helm CLI, then initialize Helm.
helm init
Download Harbor helm chart code.
git clone https://github.com/vmware/harbor
cd contrib/helm/harbor
Download external dependent charts required by Harbor chart.
helm dependency update
Secure Registry Mode
By default this chart will generate a root CA and SSL certificate for your Harbor. You can also use your own CA signed certificate:
open values.yaml, set the value of 'externalDomain' to your Harbor FQDN, and set value of 'tlsCrt', 'tlsKey', 'caCrt'. The common name of the certificate must match your Harbor FQDN.
Install the Harbor helm chart with a release name my-release:
helm install . --debug --name my-release --set externalDomain=harbor.my.domain
Make sure harbor.my.domain resolves to the K8s Ingress Controller IP on the machines where you run docker or access Harbor UI.
You can add harbor.my.domain and IP mapping in the DNS server, or in /etc/hosts, or use the FQDN harbor.<IP>.xip.io.
Follow the NOTES section in the command output to get Harbor admin password and add Harbor root CA into docker trusted certificates.
If you are using an external service like cert-manager for generating the TLS certificates,
you will want to disable the certificate generation by helm by setting the value generateCertificates to false. Then the ingress' annotations will be scanned
by cert-manager and the appropriate secret will get created and updated by the service.
If using acme's certificates, do not forget to add the following annotation to your ingress.
ingress:
annotations:
kubernetes.io/tls-acme: "true"
The command deploys Harbor on the Kubernetes cluster in the default configuration. The configuration section lists the parameters that can be configured in values.yaml or via '--set' params during installation.
Tip
: List all releases using
helm list
Insecure Registry Mode
If setting Harbor Registry as insecure-registries for docker, you don't need to generate Root CA and SSL certificate for the Harbor ingress controller.
Install the Harbor helm chart with a release name my-release:
helm install . --debug --name my-release --set externalDomain=harbor.my.domain,insecureRegistry=true
Make sure harbor.my.domain resolves to the K8s Ingress Controller IP on the machines where you run docker or access Harbor UI.
You can add harbor.my.domain and IP mapping in the DNS server, or in /etc/hosts, or use the FQDN harbor.<IP>.xip.io.
Then add "insecure-registries": ["harbor.my.domain"] in the docker daemon config file and restart docker service.
Uninstalling the Chart
To uninstall/delete the my-release deployment:
helm delete my-release
The command removes all the Kubernetes components associated with the chart and deletes the release.
Configuration
The following tables lists the configurable parameters of the Harbor chart and the default values.
| Parameter | Description | Default |
|---|---|---|
| Harbor | ||
harborImageTag |
The tag for Harbor docker images | v1.4.0 |
externalDomain |
Harbor will run on (https://externalDomain/). Recommend using K8s Ingress Controller FQDN as externalDomain, or make sure this FQDN resolves to the K8s Ingress Controller IP. |
harbor.my.domain |
insecureRegistry |
If set to true, you don't need to set tlsCrt/tlsKey/caCrt, but must add Harbor FQDN as insecure-registries for your docker client. | false |
generateCertificates |
Set to false if TLS certificate will be managed by an external service | true |
tlsCrt |
TLS certificate to use for Harbor's https endpoint. Its CN must match externalDomain. |
auto-generated |
tlsKey |
TLS key to use for Harbor's https endpoint | auto-generated |
caCrt |
CA Cert for self signed TLS cert | auto-generated |
persistence.enabled |
enable persistent data storage | false |
secretKey |
The secret key used for encryption. Must be a string of 16 chars. | not-a-secure-key |
| Adminserver | ||
adminserver.image.repository |
Repository for adminserver image | vmware/harbor-adminserver |
adminserver.image.tag |
Tag for adminserver image | v1.4.0 |
adminserver.image.pullPolicy |
Pull Policy for adminserver image | IfNotPresent |
adminserver.emailHost |
email server | smtp.mydomain.com |
adminserver.emailPort |
email port | 25 |
adminserver.emailUser |
email username | sample_admin@mydomain.com |
adminserver.emailSsl |
email uses SSL? | false |
adminserver.emailFrom |
send email from address | admin <sample_admin@mydomain.com> |
adminserver.emailIdentity |
"" | |
adminserver.key |
adminsever key | not-a-secure-key |
adminserver.emailPwd |
password for email | not-a-secure-password |
adminserver.adminPassword |
password for admin user | Harbor12345 |
adminserver.authenticationMode |
authentication mode for Harbor ( db_auth for local database, ldap_auth for LDAP, etc...) Docs |
db_auth |
adminserver.selfRegistration |
Allows users to register by themselves, otherwise only administrators can add users | on |
adminserver.ldap.url |
LDAP server URL for ldap_auth authentication |
ldaps://ldapserver |
adminserver.ldap.searchDN |
LDAP Search DN | `` |
adminserver.ldap.baseDN |
LDAP Base DN | `` |
adminserver.ldap.filter |
LDAP Filter | (objectClass=person) |
adminserver.ldap.uid |
LDAP UID | uid |
adminserver.ldap.scope |
LDAP Scope | 2 |
adminserver.ldap.timeout |
LDAP Timeout | 5 |
adminserver.ldap.verifyCert |
LDAP Verify HTTPS Certificate | True |
adminserver.resources |
resources to allocate for container | undefined |
adminserver.volumes |
used to create PVCs if persistence is enabled (see instructions in values.yaml) | see values.yaml |
| Jobservice | ||
jobservice.image.repository |
Repository for jobservice image | vmware/harbor-jobservice |
jobservice.image.tag |
Tag for jobservice image | v1.4.0 |
jobservice.image.pullPolicy |
Pull Policy for jobservice image | IfNotPresent |
jobservice.key |
jobservice key | not-a-secure-key |
jobservice.secret |
jobservice secret | not-a-secure-secret |
jobservice.resources |
resources to allocate for container | undefined |
| UI | ||
ui.image.repository |
Repository for ui image | vmware/harbor-ui |
ui.image.tag |
Tag for ui image | v1.4.0 |
ui.image.pullPolicy |
Pull Policy for ui image | IfNotPresent |
ui.key |
ui key | not-a-secure-key |
ui.secret |
ui secret | not-a-secure-secret |
ui.privateKeyPem |
ui private key | see values.yaml |
ui.resources |
resources to allocate for container | undefined |
| MySQL | ||
mysql.image.repository |
Repository for mysql image | vmware/harbor-mysql |
mysql.image.tag |
Tag for mysql image | v1.4.0 |
mysql.image.pullPolicy |
Pull Policy for mysql image | IfNotPresent |
mysql.host |
MySQL Server | ~ |
mysql.port |
MySQL Port | 3306 |
mysql.user |
MySQL Username | root |
mysql.pass |
MySQL Password | registry |
mysql.database |
MySQL Database | registry |
mysql.resources |
resources to allocate for container | undefined |
mysql.volumes |
used to create PVCs if persistence is enabled (see instructions in values.yaml) | see values.yaml |
| Registry | ||
registry.image.repository |
Repository for registry image | vmware/registry-photon |
registry.image.tag |
Tag for registry image | v2.6.2-v1.4.0 |
registry.image.pullPolicy |
Pull Policy for registry image | IfNotPresent |
registry.rootCrt |
registry root cert | see values.yaml |
registry.httpSecret |
registry secret | not-a-secure-secret |
registry.resources |
resources to allocate for container | undefined |
registry.volumes |
used to create PVCs if persistence is enabled (see instructions in values.yaml) | see values.yaml |
| Clair | ||
clair.enabled |
Enable Clair? | true |
clair.image.repository |
Repository for clair image | vmware/clair-photon |
clair.image.tag |
Tag for clair image | v2.0.1-v1.4.0 |
clair.resources |
resources to allocate for container | undefined |
postgresql |
Overrides for postgresql chart values.yaml | see values.yaml |
| Notary | ||
notary.enabled |
Enable Notary? | true |
notary.server.image.repository |
Repository for notary server image | vmware/notary-server-photon |
notary.server.image.tag |
Tag for notary server image | v0.5.1-v1.4.0 |
notary.signer.image.repository |
Repository for notary signer image | vmware/notary-signer-photon |
notary.signer.image.tag |
Tag for notary signer image | v0.5.1-v1.4.0 |
notary.db.image.repository |
Repository for notary database image | vmware/mariadb-photon |
notary.db.image.tag |
Tag for notary database image | v1.4.0 |
notary.db.password |
The password of users for notary database | Specify your own password |
Specify each parameter using the --set key=value[,key=value] argument to helm install. For example:
helm install . --name my-release --set externalDomain=harbor.<IP>.xip.io
Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
helm install . --name my-release -f /path/to/values.yaml
Tip
: You can use the default values.yaml
Persistence
Harbor stores the data and configurations in emptyDir volumes. You can change the values.yaml to enable persistence and use a PersistentVolumeClaim instead.
"An emptyDir volume is first created when a Pod is assigned to a Node, and exists as long as that Pod is running on that node. When a Pod is removed from a node for any reason, the data in the emptyDir is deleted forever."