From 0eeeead88d8f26a1a2eec760811a20dea522bfde Mon Sep 17 00:00:00 2001 From: Jon Sands Date: Tue, 23 Nov 2021 08:01:56 -0500 Subject: [PATCH] more formatting --- docs/perc.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/perc.md b/docs/perc.md index 1d1ddcd..c7adefd 100644 --- a/docs/perc.md +++ b/docs/perc.md @@ -25,7 +25,7 @@ There's two main reasons to do this, assuming you don't need the hardware RAID f **Different Driver:** The stock Dell firmware (MegaRAID-based) uses the MegaRAID driver in Linux/FreeBSD/etc. In some distributions this can cause issues, for example FreeNAS has issues pulling SMART data from drives connected to a MegaRAID controller. After crossflashing to IT mode, the card is used by the OS via the much simpler mpt3sas driver. ## Preparation -Ensure there is only one LSI-based adapter in your system. If there are others besides the adapter you intend to flash, remove them! You also need to disable a few BIOS settings. This step is not optional. In your server BIOS, disable all of the following: +Ensure there is only one LSI-based adapter in your system. If there are others besides the adapter you intend to flash, remove them! You also need to disable a few BIOS settings. This step is not optional. In your server BIOS, **disable** all of the following: * Processor Settings > Virtualization Technology * Integrated Devices > SR-IOV Global Enable