diff --git a/docs/7xxx.md b/docs/7xxx.md index 4b97dae..7f6c5e6 100644 --- a/docs/7xxx.md +++ b/docs/7xxx.md @@ -1,3 +1,52 @@ ## placeholder -ICX7xxx series honor info \ No newline at end of file +ICX7xxx series honor info + + + +## License The Switch ICX7150 +Run the following to unlock all the features of the switch (10gbE ports, advanced routing, etc). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. + +``` +exit +license install perpetual 1 2x10gr +conf t +int e 1/3/1 to 1/3/2 +no speed-duplex 1000-full +exit +write mem +exit +reload +``` +The switch will reload, and the 10gbE ports and everything else will now be functional. + + + +## License The Switch (ICX7250) +Run the following to unlock all the features of the ICX7250 (10gbE ports, advanced routing, etc). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. + +``` +exit +license install perpetual 1 8x10g +license install perpetual 1 l3-prem +conf t +interface ethernet 1/2/1 to 1/2/8 +no speed-duplex 1000-full +exit +write mem +exit +reload +``` +The switch will reload, then the 10gbE ports and everything else will now be fully functional. + +## License The Switch (ICX7450) +Run the following to unlock all the features of the ICX7450 (advanced routing & macsec encryption). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. + +``` +exit +license install perpetual 1 l3-prem +license install perpetual 1 macsec +write mem +reload +``` +The switch will reload, then the new features will now be fully functional. \ No newline at end of file diff --git a/docs/brocade-overview.md b/docs/brocade-overview.md index 75de300..5821ff1 100644 --- a/docs/brocade-overview.md +++ b/docs/brocade-overview.md @@ -3,7 +3,7 @@ ## Master ZIP (Firmware, Manuals, Licenses) Download the ZIP below which contains all the firmware, licenses, and documentation you'll need for the guides on this site. -[```Brocade Master ZIP```](../store/brocade-07-04-21.zip) +[```Brocade Master ZIP```](store/brocade-07-04-21.zip) ```ICX6xxx SW version: 08030u``` ```ICX7xxx SW version: 08092e``` ```ZIP Updated: 07-04-2021``` diff --git a/docs/icx7150.md b/docs/icx7150.md index e305742..9f29d9d 100644 --- a/docs/icx7150.md +++ b/docs/icx7150.md @@ -173,21 +173,6 @@ ip ssh pub-key-file tftp 192.168.1.49 public.key ``` You shouldn't need to be told basic key management if you're following this section, but just in case - copy your private key to the proper location on the *nix machine you'll be SSH'ing from, or if you're on windows, load it using [pageant](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html). Now when you SSH to the switch, it will authenticate using your private key. -## License The Switch -Run the following to unlock all the features of the switch (10gbE ports, advanced routing, etc). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. - -``` -exit -license install perpetual 1 2x10gr -conf t -int e 1/3/1 to 1/3/2 -no speed-duplex 1000-full -exit -write mem -exit -reload -``` -The switch will reload, and the 10gbE ports and everything else will now be functional. ## Saving & Conclusions Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the `write memory` command. To do so, you must be at the `enable` level or higher. @@ -303,3 +288,6 @@ optical-monitor optical-monitor non-ruckus-optic-enable write mem ``` + +## Licensing Info +Like other ICX7xxx series switches, the ICX7150 requires license file unlocks for 10gbE port functionality as well as some advanced software features. Thankfully, starting with the ICX7xxx series, Ruckus made the licenses honor-based. This means they can be freely unlocked on your switch. Just visit the [ICX7xxx Licensing](7xxx.md) section to fully license and unlock your switch. \ No newline at end of file diff --git a/docs/icx7250.md b/docs/icx7250.md index ebfb515..44c4f2a 100644 --- a/docs/icx7250.md +++ b/docs/icx7250.md @@ -167,36 +167,6 @@ ip ssh pub-key-file tftp 192.168.1.49 public.key ``` You shouldn't need to be told basic key management if you're following this section, but just in case - copy your private key to the proper location on the *nix machine you'll be SSH'ing from, or if you're on windows, load it using [pageant](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html). Now when you SSH to the switch, it will authenticate using your private key. -## License The Switch (ICX7250) -Run the following to unlock all the features of the ICX7250 (10gbE ports, advanced routing, etc). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. - -``` -exit -license install perpetual 1 8x10g -license install perpetual 1 l3-prem -conf t -interface ethernet 1/2/1 to 1/2/8 -no speed-duplex 1000-full -exit -write mem -exit -reload -``` -The switch will reload, then the 10gbE ports and everything else will now be fully functional. - -## License The Switch (ICX7450) -Run the following to unlock all the features of the ICX7450 (advanced routing & macsec encryption). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. - -``` -exit -license install perpetual 1 l3-prem -license install perpetual 1 macsec -write mem -reload -``` -The switch will reload, then the new features will now be fully functional. - - ## Saving & Conclusions Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the `write memory` command. To do so, you must be at the `enable` level or higher. @@ -311,3 +281,6 @@ optical-monitor optical-monitor non-ruckus-optic-enable write mem ``` + +## Licensing Info +Like other ICX7xxx series switches, the ICX7250 and ICX7450 require license file unlocks for 10gbE port functionality as well as some advanced software features. Thankfully, starting with the ICX7xxx series, Ruckus made the licenses honor-based. This means they can be freely unlocked on your switch. Just visit the [ICX7xxx Licensing](7xxx.md) section to fully license and unlock your switch. \ No newline at end of file