add placeholders for vlan routing and config mgmt

This commit is contained in:
Jon Sands 2021-09-15 04:31:50 -04:00
parent 23d7cae2eb
commit 24d6c2a41d

View File

@ -102,7 +102,6 @@ Whenever you make changes (like above) they take effect immediately, however the
write memory
```
To exit the CLI level you are at, use `exit`. So assuming you are still at the ```configure terminal``` level, type the following to exit back to the ```enable``` level:
```
exit
@ -120,6 +119,7 @@ no hostname beefbox
## Advanced Features
This section will outline some of the more advanced configurations you may want to explore. If you use any of them, don't forget to `write mem` when done to actually save your changes.
### PoE
If you have a PoE enabled model you'll need to enable power on the ports you have PoE devices plugged into. For example, let's say you've plugged a PoE camera into port 5. Lets enable PoE power to turn it on:
```
@ -205,6 +205,12 @@ Coming Soon
### ACLs
Coming Soon
### Inter-VLAN Routing
Coming Soon
### Config Management
Coming Soon
## Useful Commands
Show chassis information like fan and temperature status: