From 8b2823cb648ddf500e3c80996ea6241a8f50c082 Mon Sep 17 00:00:00 2001 From: Jon Sands Date: Tue, 29 Oct 2019 04:05:43 -0400 Subject: [PATCH] add jtag recovery note --- documentation/jtag.md | 2 ++ documentation/jtag6610.md | 2 ++ 2 files changed, 4 insertions(+) diff --git a/documentation/jtag.md b/documentation/jtag.md index 24538e0..e5afa08 100644 --- a/documentation/jtag.md +++ b/documentation/jtag.md @@ -99,3 +99,5 @@ Unplug the switch power first! When the switch is off and powered down, then unp 1. Power down the switch (unplug power) 2. Power down the BDI2000 (unplug power brick) 3. Disconnect the BDI2000 16 pin cable from the JTAG header + +Put the switch cover back on. Now that your switch is booting into the bootloader, you can go and follow the [flashing guide](https://brokeaid.com/#booting-brocade) - start from the **Booting Brocade** section as linked. diff --git a/documentation/jtag6610.md b/documentation/jtag6610.md index 82b7e1c..8ced515 100644 --- a/documentation/jtag6610.md +++ b/documentation/jtag6610.md @@ -101,3 +101,5 @@ Unplug the switch power first! When the switch is off and powered down, then unp 1. Power down the switch (unplug power) 2. Power down the BDI2000 (unplug power brick) 3. Disconnect the BDI2000 16 pin cable from the JTAG header + +Put the switch cover back on. Now that your switch is booting into the bootloader, you can go and follow the [update guide](https://fohdeesha.com/docs/fcx/) to flash a new OS etc to the switch from the bootloader.