mirror of
https://github.com/Fohdeesha/lab-docu.git
synced 2024-11-29 11:15:23 +01:00
41 lines
2.0 KiB
Markdown
41 lines
2.0 KiB
Markdown
# FCX Licensing
|
|
**DISCLAIMER:** This is intended for educational use only, or for a homelab type environment.
|
|
|
|
Brocade switches used to be licensed via a physical EEPROM with a magic string written into it. When the OS booted and saw this magic string, it knew to enable advanced features.
|
|
|
|
The FCX was the last Brocade model to use this scheme before moving to keyed software licenses. They even shipped with a blank EEPROM in the socket ready to go. This means we just need to write the magic string to this EEPROM to fully unlock licensed features.
|
|
|
|
## What Does This Do?
|
|
On the Brocade FCX, the ```ADV``` license in this guide unlocks the following:
|
|
|
|
- BGP
|
|
- VRFs
|
|
- GRE Tunnels
|
|
- IPv6-in-IPv4 tunnels - will terminate Hurricane Electric tunnels etc
|
|
|
|
## Update The Switch
|
|
To do this, you need the latest bootloader and OS - this is not optional! Follow the update guide to upgrade to the latest firmware image AND bootloader if you haven't already - [FCX Update & Start Guide](fcx.md)
|
|
|
|
When upgraded and configured, move on to the below.
|
|
|
|
## Enter Bootloader
|
|
|
|
We need to enter the bootloader - Connect to the switches serial/console port using a program like Putty (9600 8N1). Power on the switch while watching your serial terminal - it will have a prompt saying `Hit b to enter the boot monitor` - press `b` quickly and you'll be dropped into the bootloader prompt.
|
|
|
|
## Write The Magic String
|
|
We just need to use an `i2c write` command in the bootloader to write the unlock code to the license EEPROM inside the FCX:
|
|
```
|
|
i2c write a 0 feedface00000200ffffffffffffffff 1
|
|
```
|
|
That's it, now reboot the switch to the full OS:
|
|
```
|
|
reset
|
|
```
|
|
|
|
## Checking The License
|
|
Once it's fully booted into the OS, run `show version` - you should see the following line near the middle, look for the `PREM` and `PROM-TYPE FCX-ADV-U` - this means it's detected the license EEPROM and unlocked the `ADV` license:
|
|
```
|
|
HW: Stackable FCX648S-PREM (PROM-TYPE FCX-ADV-U)
|
|
```
|
|
|
|
If you see that, you're good to go and fully licensed. |