* allow numerical start and allow dots in ssh alias
We previously restricted the ssh alias to start with an
alphabetic character and did not allow dots within it. This caused
problems with users wanting to use an ip address as an alias. This lifts
that restriction so both can freely be used.
Note that while it is common to use the hostname as the alias, hostnames
are not allowed to use the underscore character. However, we do allow
the alias to contain an underscore. I do not think we can remove this
from aliases now but it is something to watch out for in the future.
* allow backslash in username
This involved converting the regexp string into a raw string to able to
use the backslash character. this is important.
* Revert "allow backslash in username"
This reverts commit cafe281241. Upon
reflection, more time is needed to evaluate that this actually corrects
the issue. It will be performed with proper diligence at a later time.
* add port to end of canoncial names when not 22
The canonical name is the identifying key in the database, so it causes
problems if another remote entry has the same canonical name. By adding
the port number to the end of this, it is possible to differentiate the
two.
* add db migrations for adding port to canonicalname
The up migration adds the port to the existing canonical id if it exists
and is not 22. The down migration strips the port off the canonical name
and deletes extra remotes with the same canonical name. If all remotes
with that canonical name have been archived, it keeps the first one
added to the database. If any have not been archived, it keeps the first
added to the database from the non-archived group.
* remove ability to edit port number via ssh import
Previously, ssh imports could edit the port number since it was possible
to change them in the config file without changin the canonical name.
Now that the canonical name contains the port, a change in the port will
simply create a new database entry. For this reason, the ability to
modify the ssh port is dead code and has been removed.
* allow backslash in username
This involved converting the regexp string into a raw string to able to
use the backslash character. this is important.
* simplify up migration logic
The previous up migration was suboptimal because it was accounting for a
corner case not found in production. That case no longer needs to be
considered, so the procedure was simplified.
* improved disconnected modal
* wrap pre with div
* make number of a lines param a constant
* revert app.tsx
* use tail command and capture the output instead
* reset TabSwitcherModal
* fix commands that require quoted paths
Several commands did not wrap the path in quotes which caused problems
when attempting to store the waveterm installation in a place that had a
space in the path. This corrects this in the particular case where the
username does not have spaces but the path to the executable does.
Note: the case of a user name having spaces has not been tested but
likely does not work.
* fix logging problem for wavesrv
A previous fix replaced the getWaveSrvCmd with getWaveSrvPath. This
needs to be getWaveSrvCmd to enable logging.
* fix variable name
* register cmd+p shortcut
* tab switcher modal
* initial implementation
* tab switcher modal content
* fix styles
* fix scroll bugs
* set selected index when clicking option
* hover effect for options
* switch when Enter key is pressed
* remove fuse.js
* only use switchscreen for switching sessions and tabs
* var naming changes
* fix multiple focused options on mouse hover
* fix duplicate focused options and scrollbar
* clean imports
* fix wrong function name
* merge color styles in app.less
* remove debugging code
* use For component when iterating thru options
* minor style fix
* remove mouse interaction, keep focusedIdx in bounds, increase max number of tabs shown, small layout adjustment for big tab names (and more space for icon)
* create migrations for required database change
This is a first attempt that does not appear to be working properly. It
requires review.
* fix errors in db migrations
The previous commit had an extra json call that broke the update and did
not remove the imported interies during a downgrade.
* change migrations to use column instead of json
It makes more sense to associate the source of a config with the remote
type than the sshopts type. This change makes that clear in the database
structure.
* ensure adding a remote manually tags correctly
Using the usual way of adding a remote should result in a sshconfigsrc
of "waveterm-manual". This will be important for filtering out remotes
installed manually and remotes installed via import
* create basic structure for parsing ssh config
This entails creating a new command, making it possible to query only
the imported remotes from the database, and implementing the logic to
handle all of the updates needed.
This needs improvements in a few areas:
- the /etc/ssh/config needs to be parsed as well
- the logic for editing exisiting imported remotes needs to be written
- error handling needs to be improved
- update packet responses need to be provided
* add sshkey support and implement editing
We now search for the ssh identity keyfile and add it if it is found.
Additionally, the logic to edit previously imported ssh hosts has been
added.
* combine hosts from user and system ssh config
We now check both the user ~/.ssh/config as well as the /etc/ssh/config
for hosts. This loops through each file starting with the user one. For
each host, it selects the first pattern without a wildcard and chooses
that to be the alias. If any future hosts are found to have the same
alias, they are skipped. Errors are raised if neither config file can be
opened or no aliases were found.
* improve logging and error reporting
Error reporting is now shortcircuited in cases of individual remotes in
order to allow the other remotes to continue. These errors are now
printed to logs instead.
* allow imports to edit ssh port
Previously, ssh ports could not be edited after the fact. Unfortunately,
this can cause problems since the port can be changed in an ssh config
file. To address this, we allow imports to change the port if a host
with the same canonical name had previously been imported.
* fix response to parse command
* fix error handline for alias parsing
Small mistake of checking for equality instead of inequality
* fix the ability to overwrite hostName with alias
if ssh_config does not find Hostname, it won't output an error. Now we
compare against the result instead of looking for an error.
* fix the error catching for User and Port
This fixes the same problem where parsing the config doesn't give an
error in the case when nothing is found. As before, this checks for a
blank result instead.
* remove unused code
* remove repeated canonical name check
The logic that checks for an existing canonical name already exists in
the AddRemote function, so it is not needed here.
Secondly, we now only allow edits of previously created remotes if they
have not been archived. If they have, the usual logic for creating a new
remote takes precedence.
Lastly, there is no need to archive a remote that has already been
archived so an additional check has been added.
* allow archives to preserve the SSHConfigSrc
* add log message for archiving of imported remotes
* create variables for string variants
Matches existing code style
* add cleanup for opened files
* move migration 25 to migration 26 (already merged a migration 25)
* fix RemoteRuntimeState in ModelUpdate by moving type to sstore.go. Fix some bugs in remote:parse. Fix key/identityfile, return value, and remote editing (should go through msh). remote sudo. add info messages around parse status
* fix issue with archiving the sshconfigsrc
A bug in RemoteType's FromMap caused the loss of sshconfigsrc during the
conversion. This has been corrected and the schema has been updated.
* fix order of archiving removed imported remotes
Previously, if the canonical name changed, the code would try to create
a new remote before archiving the old one. This did not work if the
alias didn't change. Now we archive first and add a new remote after.
* fix ability to change port when importing config
Importing from sshconfig needs to allow the port to change. This was not
happening because of a bug that has been corrected.
* always use host in place of hostname
Since host is the key actually searched for in the ssh config file,
searching for user@hostName may not actually work. To avoid this, we now
always use user@host instead.
* automatically determine ConnectMode
This aims to select a connection mode based off what is provided in the
ssh config file. It aims for auto connections when possible but will
fall back to manual if we can't easily support it
* remove sshkeysource migration number confilict
Previously had conflicting migration numbers of 26. The change not in
the main branch has been moved to 27 to remove the conflict.
* move sshkeysource migration to migration 28
* add WaveOptions flag parsing for ssh config
This is currently being used to allow users to force manual connect mode
if desired. It will also be used to force skipping options in the future
but that is not complete in this commit.
* implement ignore flag for ssh config parsing
The ignore flag will now archive an imported remote if it previously
existed and not create a new remote in its place.
* fix discovery of identity file
Previously, a ~ in the identity file's path was not expanded to the home
dir. Because of this, files with a ~ were previously identified as
invalid files. By expanding it during the search, this is no longer the
case.
* disable frontend edit button for imported remotes
Imported Remotes should not be editable in waveterm by users. This edit
makes it clear that the button will not work for those cases. Further
edits may be needed to explain why it doesn't work and what to do
instead.
* add backend rejection of updating imported remote
As before, we don't want manual editing of an imported remote inside the
app. This ensures that it can't happen on the backend.
* create tooltips for sshconfig edit/delete buttons
For remotes that are imported, edits are not allowed. This adds a
tooltip that explains what to do instead.
Deleting remotes that are imported is allowed, but they will come back
if the user imports again. The tooltip explains a way to avoid this.
* add logo after name for imported remotes
In the connections screen, there previously was not a way to tell
imported connections from manually created connections. This change adds
a logo after the imported ones to differentiate them.
* small formatting updates
* add import tooltip to connection modal
Added the logo for an imported config to the connection modal. It also
provides a short description when it the mouse hovers over it.
* add button to import ssh config
Make the command into a button for a simple gui interface.
Also ran prettier to clean up some syntax.
* remove strict casing on WaveOptions
WaveOptions was previously very specific about the casing of the ignore
and connectmode subcommands. With this update, the casing is
automatically converted to lowercase and can be ignored.
* add status dot before name in connections screen
* add space and tooltip to connection imported icon
* re-prettier
* sync schema.sql with running schema
* remove incognito field from history table. also don't add empty FeState vars
* history updates, add festate, durationms, exitcode, status, and tags into history table
* update screen/session delete, and clear to no longer purge history items. move deleted screens/sessions into a tombstone table.
* update schema
* fix alias -> fn
* quiet the security warning about an unchecked byte conversion. no real security issue here, but add a range check for good measure.
* working on an in-memory store for screen information
* nostrpos sentinel
* textareainput now tracks selection (to update backend)
* make websocket connections much safer. add a defer/panic handler for each ws message handled on backend. don't allow client to reconnect to backend ws handler more than once per second (handles issue with lots of fast fails)
* use onSelect to have frontend textarea sync state to backend ScreenMem store
* restore cmdline when switching screens
* prettier
* Add script to generate license disclaimers for all dependencies
* update readme
* Upload current acknowledgements
* Add acknowledgements link to about, remove unnecessary width setting
* revert gitignore
* update readme wording
* i was wrong, we can output for both backend mods at the same time
* update wording
* remove license button in about modal (replaced with acknowledgements)
* inital implementation
* cleanup
* ui jump fix
* fix wrong first tab top right border radius
* add comment
* remove react.fragment. only do initial screens populate on componentDidMount, rename this.scrollIntoViewTimeout (add Id to distinguish from state.scrollIntoViewTimeout).
* clean up some imports
* use single tabRef
* Fix unvalidated path warning in cirfile.go
* Adding test
* move dir path vars into global scope, set wave home in test if not set already
* separate validation code into own testable func
* do removal of cir file in cleanup
* rename test file names
* flock should return err if waiting without done fn
* update comment
* use timeout context
* remove redundant validation
* add more error messages
* use filepath.join instead
* validate when creating cirfile too
* support .ptyout.cf, etc.
* remove validation as cirfile is "trusted", since it only accepts pre-validated input
* revert to passing nil context for flock in the Create file case
* sidebar render delay of 0.5s, and a 0.5s transition on main window width
* fix width calculation and how we apply the buffer width for sidebar
* also add the model.ts change
handleKeyDown was a method that filtered out specific keypresses if they
weren't specific keycodes. This did not play well with all keyboards
which made it impossible to enter port numbers. furthermore,
handleInputChange should already filter out non-numeric characters, so
the filtering still works properly with this removal.
* take a stab at fixing #99. ignore invalid output before we see a real packet. the complication here was ensuring we always output a real packet in every flow so we don't actually lose valid errors.
* add ping packets to prime the parser (when in ignoreUntilValid mode)
* work on basic sidebar layout
* fix more golang warnings
* sidebar open/close
* add ability to set width of split
* sidebar add and remove, set width, etc.
* almost working sidebar implementation -- still needs height/width, input control, and bug with initial add, but getting there
* add isSidebarOpen() method
* fix resize jump -- must set width in error handler as well (before window is loaded)
* sidebar UI touchups and help
* more sidebar progress, render more like regular lines, just in the right column
* merge
* move migration to 26
* simplify sidebar types
* checkpoint
* proxy things through parent screen object for sidebar
* checkpoint, add/remove from sidebar
* work on add/remove icons for sidebar
* fix height calculation, remove close button
* bring back close button when no line is selected
* add sidebar flag to run command to run new command output in sidebar
* implement 'sidebar' kwarg in eval. this lets sidebar work for slashcommands as well that produce lines (codeedit, mdview, etc.)
* prettier
* minor fixes
* working on resizing. must exclude sidebar entries and send separate resize events based on size of sidebar (implement exclude / include for resize)
* fix sidebar terminal command resizing
* add sidebar header (toggles for half/partial width and close). add hotkey to open/close sidebar (Cmd-Ctrl-S). more robust calculation for sidebar width. add width validation. minimum sidebar width is 200px. other fixes, etc.
* wrote client code for communicating with lambda cloud
* Added timeout functionality, added check for telemetry enabled for clouod completion, added capability to unset token, other small fixes
* removed stale prints and comments, readded non stream completion for now
* changed json encode to json marshal, also testing my new commit author
* added no telemetry error message and removed check for model in cloud completion
* added defer conn.close() to doOpenAIStreamCompletion, so websocket is always closed
* made a constant for the long telemetry error message
* added endpoint getter, made errors better
* updated scripthaus file to include dev ws endpoint
* added error check for open ai errors
* changed bool condition for better readability
* update some error messages (use error message from server if returned)
* dont blow up the whole response if the server times out. just write a timeout message
* render streaming errors with a new prompt in openai.tsx (show content and error). render cmd status 'error' with red x as well. show exitcode in tooltip of 'x'
* set hadError for errors. update timeout error to work with new frontend code
* bump client timeout to 5 minutes (longer than server timeout)
---------
Co-authored-by: sawka
* back-end implementation. initial ui implementation
* rough implementation of drag and drop
* wrap with AnimatePresence
* persist screen order
* cleanup
* return all screens when updating indices
* remove y axis anitation
* remove debugging code
* chain filtering and sorting logic
* remove unused var
* fix issue where tabs shift to left on hover
* fix tabElem scroll into view regression
* clear scrollIntoViewTimeout when component unmounts
* remove borken style prop
* completely remove animation related props
* scroll into view only when there's a new tab
* minor comment fix
* resolvePosInt() to resolve index
* move tab width const to magiclayout.ts
* move back scroll into view code as it was before
* clear timout
* refactor setTimeout
* remov debugging codes
* format cmdrunner.go
* move clearTimeout
* remove wheel event listener
* switch emain to using the bash from PATH, not defaulting to /bin/bash. not convinced this fixes#132 yet because the PATH set for MacOS applications is not set from .bash_profile or .zprofile. those seem to be set with launchctl setenv.
* move MacUserShell() func to shexec. use dscl UserShell output as bash path on MacOS when present. fixes#132
