117 lines
4.5 KiB
Markdown
117 lines
4.5 KiB
Markdown
# CO<sub>2</sub> Ampel
|
|
|
|
*CO<sub>2</sub> Ampel* is an open-source project, written in C++ for [ESP8266](https://en.wikipedia.org/wiki/ESP8266) or [ESP32](https://en.wikipedia.org/wiki/ESP32).
|
|
|
|
It measures the current CO<sub>2</sub> concentration (in ppm), and displays it on an LED ring.
|
|
|
|
The room should be ventilated as soon as one LED turns red.
|
|
|
|
## Features
|
|
|
|
The *CO<sub>2</sub> Ampel* can:
|
|
|
|
* Display CO2 concentration on LED ring.
|
|
* Allow calibration.
|
|
* Get current time over [NTP](https://en.wikipedia.org/wiki/Network_Time_Protocol)
|
|
* Send data over [MQTT](https://en.wikipedia.org/wiki/MQTT).
|
|
* Send data over [LoRaWAN](https://en.wikipedia.org/wiki/LoRa#LoRaWAN).
|
|
* Display measurements and configuration on a small website.
|
|
* Log data to a [CSV](https://en.wikipedia.org/wiki/Comma-separated_values) file, directly on the ESP flash memory.
|
|
* Accept many interactive commands.
|
|
|
|
## Hardware Requirements
|
|
|
|
* [ESP8266](https://en.wikipedia.org/wiki/ESP8266) or [ESP32](https://en.wikipedia.org/wiki/ESP32) microcontroller (this project has been tested with *ESP8266 ESP-12 WIFI* and *TTGO ESP32 SX1276 LoRa*)
|
|
* [Sensirion SCD30](https://www.sensirion.com/en/environmental-sensors/carbon-dioxide-sensors/carbon-dioxide-sensors-co2/) "Sensor Module for HVAC and Indoor Air Quality Applications"
|
|
* [NeoPixel Ring - 12](https://www.adafruit.com/product/1643), or [NeoPixel Ring - 16](https://www.adafruit.com/product/1463) (experimental)
|
|
|
|
See the [documentation](https://transfer.hft-stuttgart.de/gitlab/co2ampel/ampel-documentation) for more info.
|
|
|
|
## Software Requirements
|
|
|
|
* [PlatformIO](https://platformio.org/)
|
|
or
|
|
* [Arduino IDE](https://www.arduino.cc/en/software)
|
|
|
|
## Installation
|
|
|
|
* If `config.h` does not exist, copy it from `config.public.h`
|
|
* Modify `config.h`, e.g. for measurement time-steps, WiFi access, MQTT, NTP and web-server.
|
|
|
|
### PlatformIO
|
|
|
|
PlatformIO can be run from [VSCODE](https://platformio.org/install/ide?install=vscode), [Eclipse CDT](https://www.eclipse.org/cdt/) or console:
|
|
|
|
```bash
|
|
make upload board=esp8266 && make monitor # For ESP8266
|
|
```
|
|
```bash
|
|
make upload board=esp32 && make monitor # For ESP32
|
|
```
|
|
|
|
### Arduino IDE
|
|
|
|
* All the libraries are included in this repository. No need to install anything via *Library Manager*.
|
|
|
|
* Add your board to the [board manager](https://github.com/esp8266/Arduino#installing-with-boards-manager). Either ESP8266:
|
|
|
|
http://arduino.esp8266.com/stable/package_esp8266com_index.json
|
|
|
|
or ESP32:
|
|
|
|
https://dl.espressif.com/dl/package_esp32_index.json
|
|
|
|
* Choose the correct board in *Tools > Board > ...*
|
|
* Choose the correct *Flash size* (e.g. "Flash Size : 4MB (1MB FS, OTA:~1019kB)" for *ESP8266 ESP-12 WIFI*)
|
|
|
|
* *Verify*
|
|
* *Upload*
|
|
* *Tools > Serial Monitor*
|
|
|
|
## Available commands
|
|
|
|
In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Enter</kbd> in order to list the available commands:
|
|
|
|
* `auto_calibrate 0/1` (Disables/enables autocalibration).
|
|
* `calibrate` (Starts calibration process).
|
|
* `calibrate 600` (Starts calibration process, to given ppm).
|
|
* `calibrate! 600` (Calibrates right now, to given ppm).
|
|
* `co2 1500` (Sets co2 level, for debugging purposes).
|
|
* `color 0xFF0015` (Shows color, specified as RGB, for debugging).
|
|
* `csv 60` (Sets CSV writing interval, in s).
|
|
* `format_filesystem` (Deletes the whole filesystem).
|
|
* `free` (Displays available heap space).
|
|
* `local_ip` (Displays local IP and current SSID).
|
|
* `lora 300` (Sets LoRaWAN sending interval, in s).
|
|
* `mqtt 60` (Sets MQTT sending interval, in s).
|
|
* `night_mode` (Toggles night mode on/off).
|
|
* `reset` (Restarts the ESP).
|
|
* `reset_scd` (Resets SCD30).
|
|
* `send_local_ip` (Sends local IP and SSID via MQTT. Can be useful to find sensor).
|
|
* `set_time 1618829570` (Sets time to the given UNIX time).
|
|
* `show_csv` (Displays the complete CSV file on Serial).
|
|
* `timer 30` (Sets measurement interval, in s).
|
|
* `wifi_scan` (Scans available WiFi networks).
|
|
|
|
The commands can be sent via the Serial interface, from the webpage or via MQTT.
|
|
|
|
## Authors
|
|
|
|
* Eric Duminil (HfT Stuttgart)
|
|
* Robert Otto (HfT Stuttgart)
|
|
* Myriam Guedey (HfT Stuttgart)
|
|
* Tobias Gabriel Erhart (HfT Stuttgart)
|
|
* Jonas Stave (HfT Stuttgart)
|
|
* Michael Käppler
|
|
|
|
## Contributing
|
|
|
|
* Merge requests are welcome, and should be based on the `develop` branch.
|
|
* The `develop` branch gets merged into the `master` once it has been sufficiently tested.
|
|
* For major changes, please open an issue first to discuss what you would like to change.
|
|
|
|
## License
|
|
|
|
Copyright © 2021, [HfT Stuttgart](https://www.hft-stuttgart.de/)
|
|
[GPLv3](https://choosealicense.com/licenses/gpl-3.0/)
|