Paper/CONTRIBUTING.md

7.9 KiB

Contributing to Paper

PaperMC has a very lenient policy towards PRs, but would prefer that you try and adhere to the following guidelines.

Understanding Patches

Patches to Paper are very simple, but center around the directories 'Paper-API' and 'Paper-Server'

Assuming you already have forked the repository:

  1. Pull the latest changes from the main repository
  2. Type ./paper patch in git bash to apply the changes from upstream
  3. cd into Paper-Server for server changes, and Paper-API for API changes

These directories aren't git repositories in the traditional sense:

  • Every single commit in Paper-Server/API is a patch.
  • 'origin/master' points to a directory similar to Paper-Server/API but for Paper
  • Typing git status should show that we are 10 or 11 commits ahead of master, meaning we have 10 or 11 patches that Paper and Spigot don't
    • If it says something like 212 commits ahead, 207 commits behind, then type git fetch to update spigot/paper

Adding Patches

Adding patches to Paper is very simple:

  1. Modify Paper-Server and/or Paper-API with the appropriate changes
  2. Type git add . to add your changes
  3. Run git commit with the desired patch message
  4. Run ./paper rebuild in the main directory to convert your commit into a new patch
  5. PR your patches back to this repository

Your commit will be converted into a patch that you can then PR into Paper

Modifying Patches

Modifying previous patches is a bit more complex:

Method 1

This method works by temporarily resetting HEAD to the desired commit to edit using rebase.

However, while in the middle of an edit, unless you also reset your API to a related commit, you will not be able to compile.

Using the Paper tool

The PaperMC build tool provides a handy command to automatically do this type of patch modification.

  1. Type ./paper edit server or ./paper edit api depending on which project you want to edit.
  • It should show something like this.
  1. Replace pick with edit for the commit/patch you want to modify, and "save" the changes
  • Only do this for one commit at a time.
  1. Make the changes you want to make to the patch.
  2. Type ./paper edit continue to finish and rebuild patches.
  3. PR your modifications back to this project.

Manual method

In case you need something more complex or want more control, this step-by-step instruction does exactly what the above slightly automated system does.

  1. If you have changes you are working on type git stash to store them for later.
  • Later you can type git stash pop to get them back.
  1. Type git rebase -i upstream/upstream
  • It should show something like this.
  1. Replace pick with edit for the commit/patch you want to modify, and "save" the changes.
  • Only do this for one commit at a time.
  1. Make the changes you want to make to the patch.
  2. Type git add . to add your changes.
  3. Type git commit --amend to commit.
  • MAKE SURE TO ADD --amend or else a new patch will be created.
  • You can also modify the commit message here.
  1. Type git rebase --continue to finish rebasing.
  2. Type ./paper rebuild in the main directory.
  • This will modify the appropriate patches based on your commits.
  1. PR your modifications back to this project.

Method 2 (sometimes easier)

If you are simply editing a more recent commit or your change is small, simply making the change at HEAD and then moving the commit after you have tested it may be easier.

This method has the benefit of being able to compile to test your change without messing with your API HEAD.

  1. Make your change while at HEAD
  2. Make a temporary commit. You don't need to make a message for this.
  3. Type git rebase -i upstream/upstream, move (cut) your temporary commit and move it under the line of the patch you wish to modify.
  4. Change the pick with f (fixup) or s (squash) if you need to edit the commit message
  5. Type ./paper rebuild in the main directory
  • This will modify the appropriate patches based on your commits
  1. PR your modifications to github

PR Policy

We'll accept changes that make sense. You should be able to justify their existence, along with any maintenance costs that come with them. Remember, these changes will affect everyone who runs Paper, not just you and your server. While we will fix minor formatting issues, you should stick to the guide below when making and submitting changes.

Formatting

All modifications to non-Paper files should be marked

  • Multi line changes start with // Paper start and end with // Paper end
  • You can put a messages with a change if it isn't obvious, like this: `// Paper start - reason
    • Should generally be about the reason the change was made, what it was before, or what the change is
    • Multi-line messages should start with // Paper start and use /* Multi line message here */ for the message itself
  • Single line changes should have // Paper or // Paper - reason
  • For example:
entity.getWorld().dontbeStupid(); // Paper - was beStupid() which is bad
entity.getFriends().forEach(Entity::explode());
entity.a();
entity.b();
// Paper start - use plugin-set spawn
// entity.getWorld().explode(entity.getWorld().getSpawn());
Location spawnLocation = ((CraftWorld)entity.getWorld()).getSpawnLocation();
entity.getWorld().explode(new BlockPosition(spawnLocation.getX(), spawnLocation.getY(), spawnLocation.getZ()));
// Paper end
  • We generally follow usual java style, or what is programmed into most IDEs and formatters by default
    • This is also known as oracle style
    • It is fine to go over 80 lines as long as it doesn't hurt readability
    • There are exceptions, especially in Spigot-related files
    • When in doubt, use the same style as the surrounding code

Obfuscation Helpers

In an effort to make future updates easier on ourselves, Paper tries to use obfuscation helpers whenever possible. The purpose of these helpers is to make the code more readable. These helpers should be be made as easy to inline as possible by the JVM whenever possible.

An obfuscation helper to get an obfuscated field may be as simple as something like this:

public final int getStuckArrows() { return this.bY(); } // Paper - OBFHELPER

Or it may be as compex as forwarding an entire method so that it can be overriden later:

public boolean be() {
    // Paper start - OBFHELPER
    return this.pushedByWater();
}

public boolean pushedByWater() {
    // Paper end
    return true;
}

While they may not always be done in exactly the same way each time, the general goal is always to improve readability and maintainability, so use your best judgement.

Configuration files

To use a configurable value in your patch, add a new entry in either PaperConfig or PaperWorldConfig. Use the former if a value must remain the same throughout all worlds, or the latter if it can change between worlds. The latter is preferred whenever possible.

###PaperConfig example:

public static boolean saveEmptyScoreboardTeams = false;
private static void saveEmptyScoreboardTeams() {
    saveEmptyScoreboardTeams = getBoolean("settings.save-empty-scoreboard-teams", false);
}

Notice that the field is always public, but the setter is always private. This is important to the way the configuration generation system works. To access this value, reference it as you would any other static value: if (!PaperConfig.saveEmptyScoreboardTeams) {

###PaperWorldConfig example:

public boolean useInhabitedTime = true;
private void useInhabitedTime() {
    useInhabitedTime = getBoolean("use-chunk-inhabited-timer", true);
}

Again, notice that the field is always public, but the setter is always private. To access this value, you'll need an instance of the net.minecraft.World object:

return this.world.paperConfig.useInhabitedTime ? this.w : 0;