1.9 KiB

Raw Permalink Blame History

20211115/20211116

Fix joining not working when joining is only permitted on specific router
Forward message to host even when profileID does not match
Turn on/off leds when joining is enabled/disabled
Fix CC2530 crashing when sending large messages via UART
Fix Xiaomi E1 devices not (fully) working

20201127/20201128

Fix join failing after some uptime
Support PGC410EU
Fix incorrect route usage with source routing firmware

20190619

Make source routing firmware identical to 20190315 MAX_STABILITY

20190611

Attempt to improve source routing firmware

20190608

One firmware doesn't seem to be feasible, also add source routing firmware

20190608

Try with source routing disabled and more XDATA

20190523

Re-enable source routing

20190515

CC2530_CC2591 and CC2530_CC2592 only; fix transmit power (yes, again, finally)

20190513

CC2530_CC2591 and CC2530_CC2592 only; fix transmit power (yes, again)

20190507

CC2530_CC2591 and CC2530_CC2592 only; fix transmit power

20190425

Unified firmwares, only one firmware for every device
Increased direct children to 25 for CC2531 and 21 for CC2530
Disabled source routing
Decreased XDATA size

20190315

Restructured repo
Added MAX_STABILITY firmware

20190223

Reduced memory footprint
Increased number of routes to remember to 40
Disabled route expiry

20190222

Decreased binding and group table size to 1, allows for more memory allocated to the heap. It's not used by Zigbee2MQTT anyway.
Reverted size of data buffers to default, a buffer full error is now properly handled by Zigbee2MQTT.

20190218

Fixed MAXMEMHEAP
Forward messages to endpoint 10 and 11 to 1.

20190217

Forward incoming messages from all groups (not only the ones that are in the group list)

20190215

Re-flash firmware without having to repair devices.
Fixed error 17 when executing many group commands at once.