mirror of
https://github.com/Koenkk/Z-Stack-firmware.git
synced 2025-01-09 08:07:33 +01:00
48 lines
3.0 KiB
Markdown
48 lines
3.0 KiB
Markdown
# CC2530, CC2530_CC2591, CC2530_CC2592, CC2531
|
|
|
|
## Setup development environment
|
|
1. Download and install [Z-STACK-3.0.2](http://www.ti.com/tool/Z-STACK).
|
|
2. Download and install [IAR Embedded Workbench for 8051](https://www.iar.com/iar-embedded-workbench/#!?architecture=8051).
|
|
|
|
*NOTE: For IAR Embedded Workbench for 8051 you need either the full (paid) version or the 30-days evaluation version.*
|
|
|
|
## Compiling
|
|
1. Copy `firmware_CC2531_CC2530.patch` to `Z-Stack 3.0.2`
|
|
2. Open Git Bash, go to `Z-Stack 3.0.2` and apply the patch using `git apply firmware_CC2531_CC2530.patch --ignore-space-change`.
|
|
3. Open `Z-Stack 3.0.2\Projects\zstack\ZNP\CC253x\znp.eww` with IAR Embedded workbench for 8051.
|
|
4. Select the correct target:
|
|
- For CC2531 select *CC2531 - ZNP-with-SBL*
|
|
- For CC2530, CC2530_CC2591, CC2530_CC2592 select *CC2530 - ZNP-with-SBL*
|
|
- If you want to compile the `.bin` firmware, select *ZNP-without-SBL*
|
|
5. Right-click on your target and press options. Go to C/C++ compiler -> preprocessor. First remove all *Defined symbols* and depending on what you want to compile add one of the following:
|
|
- Device type: `FIRMWARE_CC2530`, `FIRMWARE_CC2530_CC2591`, `FIRMWARE_CC2531` or `FIRMWARE_CC2530_CC2592`
|
|
- If you chose for *ZNP-without-SBL* add `FIRMWARE_SBL`.
|
|
6. Go to General Options -> Stack/Heap -> Stack sizes -> and change `XDATA` to `0x400`.
|
|
7. Press OK.
|
|
8. Right-click on your target and click *Rebuild all*.
|
|
9. Once finished, you can find the `CC253(0|1)ZNP-Prod.(hex|bin)` file in `Z-Stack 3.0.2\Projects\zstack\ZNP\CC253x\dev`.
|
|
|
|
# CC2538_CC2592_MODKAMRU_V3
|
|
|
|
## Setup development environment
|
|
1. Download and install [Z-STACK-3.0.2](http://www.ti.com/tool/Z-STACK).
|
|
2. Download and install [IAR Embedded Workbench for ARM](https://www.iar.com/iar-embedded-workbench/#!?architecture=Arm).
|
|
|
|
*NOTE: For IAR Embedded Workbench for ARM you need either the full (paid) version or the 30-days evaluation version.*
|
|
|
|
## Compiling
|
|
1. Copy `firmware_CC2538_CC2592_MODKAMRU_V3.patch` to `Z-Stack 3.0.2`
|
|
2. Open Git Bash, go to `Z-Stack 3.0.2` and apply the patch using:
|
|
`git apply --reject --whitespace=fix firmware_CC2538_CC2592_MODKAMRU_V3.patch`
|
|
3. Open `Z-Stack 3.0.2\Projects\zstack\ZNP\CC2538\ZNP.eww` with IAR Embedded workbench for ARM.
|
|
4. Select `CC2538ZNP-Debug` target.
|
|
5. Right-click on your target and press options. Go to C/C++ compiler -> preprocessor. Depending on what you want to compile, correct the following symbols in *Defined symbols*:
|
|
- to use USB interface: `HAL_UART_USB`, `xHAL_UART=TRUE`, `xZNP_ALT`;
|
|
- to use UART interface without flow control: `xHAL_UART_USB`, `HAL_UART=TRUE`, `ZNP_ALT`;
|
|
- to use UART interface with flow control enabled: `xHAL_UART_USB`, `HAL_UART=TRUE`, `xZNP_ALT`.
|
|
6. Go to Output Converter, check `Generate additional output` checkbox, select `Intel Extended hex` output format and uncheck `Override default` checkbox.
|
|
7. Press OK.
|
|
8. Right-click on your target and click *Rebuild all*.
|
|
9. Once finished, you can find the `ZNP.hex` file in `Z-Stack 3.0.2\Projects\zstack\ZNP\CC2538\CC2538ZNP-Debug\Exe\`.
|
|
|