2022-02-22 11:25:31 +01:00
Honeywell ABP Pressure Sensors
==============================
.. seo ::
:description: Instructions for setting up Honeywell ABP Pressure sensors
:image: honeywellabp.jpg
:keywords: Honeywell ABP
The `` honeywellabp `` sensor platform allows you to use your Honeywell ABP
(`website <https://sps.honeywell.com/us/en/products/sensing-and-iot/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp-series> `__ ,
`datasheet <https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp-series/documents/sps-siot-basic-board-mount-pressure-abp-series-datasheet-32305128-ciid-155789.pdf?download=false> `__ ,
`Mouser <https://www.mouser.ca/new/honeywell/honeywell-abp-pressure-sensors/> `_ ) pressure and temperature sensors with ESPHome. The :ref: `SPI <spi>` is
required to be set up in your configuration for this sensor to work
.. figure :: images/honeywellabp.jpg
:align: center
:width: 50.0%
Honeywell ABP Pressure and Temperature Sensor.
.. code-block :: yaml
# Example configuration entry
sensor:
2022-03-06 23:47:05 +01:00
- platform: honeywellabp
2022-02-22 11:25:31 +01:00
pressure:
name: "Honeywell pressure"
unit_of_measurement: "psi"
min_pressure: 0
max_pressure: 15
temperature:
name: "Honeywell temperature"
cs_pin: GPIO5 #D5
Configuration variables:
------------------------
The values for `` min_pressure `` and `` max_pressure `` can be found in the device datasheet for the specific device. These are used to calculate
the pressure reading published by the sensor. Some sensors measure pressure in `` bar `` or `` kPa `` ; set `` min_pressure `` and `` max_pressure `` to
the measurement range and `` unit_of_measurement `` to the appropriate unit for your device.
- **pressure** (*Optional* ): The information for the pressure sensor.
- **name** (**Required** , string): The name for the pressure sensor.
- **min_pressure** (**Required** , int or float): Minumim pressure for the pressure sensor, default unit `` psi `` .
- **max_pressure** (**Required** , int or float): Maximum pressure for the pressure sensor, default unit `` psi `` .
- **id** (*Optional* , :ref: `config-id` ): Set the ID of this sensor for use in lambdas.
- All other options from :ref: `Sensor <config-sensor>` .
Some sensors do not have temperature sensing ability, see datasheet. In some cases the sensor may return a valid temperature even though the
datasheet indicates that the sensor does not measure temperature.
- **temperature** (*Optional* ): The information for the temperature sensor.
- **name** (**Required** , string): The name for the temperature sensor.
- **id** (*Optional* , :ref: `config-id` ): Set the ID of this sensor for use in lambdas.
- All other options from :ref: `Sensor <config-sensor>` .
- **cs_pin** (**Required** , :ref: `SPI <spi>` ): Chip select pin.
- **update_interval** (*Optional* , :ref: `config-time` ): The interval to check the
sensor. Defaults to `` 60s `` .
See Also
--------
- :ref: `sensor-filters`
- :apiref: `honeywellabp/honeywellabp.h`
- :ghedit: `Edit`
