esphome-docs/components/sensor/daly_bms.rst

334 lines
11 KiB
ReStructuredText
Raw Normal View History

2022-04-03 09:30:25 +02:00
Daly BMS Sensor
===============
.. seo::
:description: Instructions for setting up a Daly Smart BMS
:image: daly_bms.jpg
The ``daly_bms`` sensor platform allows you to use a Daly Smart BMS
(`more info <https://dalyelec.en.made-in-china.com/>`__)
with ESPHome.
The BMS communicates via :ref:`UART <uart>`.
.. figure:: images/daly_bms_example.png
:align: center
:width: 100.0%
Component/Hub
-------------
.. code-block:: yaml
# Example configuration entry
daly_bms:
update_interval: 20s
2022-04-03 09:30:25 +02:00
Configuration variables:
************************
- **update_interval** (*Optional*, :ref:`config-time`): Delay between data requests.
- **address** (*Optional*, int): Address to use, defaults to ``0x80``.
Sensor
------
A sensor platform to read BMS data
.. code-block:: yaml
sensor:
- platform: daly_bms
voltage:
name: "Battery Voltage"
current:
name: "Battery Current"
battery_level:
name: "Battery Level"
max_cell_voltage:
name: "Max Cell Voltage"
max_cell_voltage_number:
name: "Max Cell Voltage Number"
min_cell_voltage:
name: "Min Cell Voltage"
min_cell_voltage_number:
name: "Min Cell Voltage Number"
max_temperature:
name: "Max Temperature"
max_temperature_probe_number:
name: "Max Temperature Probe Number"
min_temperature:
name: "Min Temperature"
min_temperature_probe_number:
name: "Min Temperature Probe Number"
remaining_capacity:
name: "Remaining Capacity"
cells_number:
name: "Cells Number"
temperature_1:
name: "Temperature 1"
temperature_2:
name: "Temperature 2"
2022-02-17 23:00:15 +01:00
cell_1_voltage:
name: "Cell 1 Voltage"
cell_2_voltage:
name: "Cell 2 Voltage"
cell_3_voltage:
name: "Cell 3 Voltage"
cell_4_voltage:
name: "Cell 4 Voltage"
Configuration variables:
************************
- **voltage** (*Optional*): Voltage of the battery pack connected to Daly BMS.
All options from :ref:`Sensor <config-sensor>`.
- **current** (*Optional*): Current flowing trough the BMS (input or output from batttery).
All options from :ref:`Sensor <config-sensor>`.
- **battery_level** (*Optional*): Battery level in % (SoC).
All options from :ref:`Sensor <config-sensor>`.
- **max_cell_voltage** (*Optional*): The cell of the battery with the higher voltage.
All options from :ref:`Sensor <config-sensor>`.
- **max_cell_voltage_number** (*Optional*): The cell number of the battery with the higher voltage.
All options from :ref:`Sensor <config-sensor>`.
- **min_cell_voltage** (*Optional*): The cell of the battery with the lower voltage.
All options from :ref:`Sensor <config-sensor>`.
- **min_cell_voltage_number** (*Optional*): The cell number of the battery with the lower voltage.
All options from :ref:`Sensor <config-sensor>`.
- **max_temperature** (*Optional*): The higher temperature measured from the temperature sensors.
All options from :ref:`Sensor <config-sensor>`.
- **max_temperature_probe_number** (*Optional*): The sensor number which has measured the higher temperature.
All options from :ref:`Sensor <config-sensor>`.
- **min_temperature** (*Optional*): The lower temperature measured from the temperature sensors.
All options from :ref:`Sensor <config-sensor>`.
- **min_temperature_probe_number** (*Optional*): The sensor number which has measured the lower temperature.
All options from :ref:`Sensor <config-sensor>`.
- **remaining_capacity** (*Optional*): The capacity in Ah left in the battery.
All options from :ref:`Sensor <config-sensor>`.
- **cells_number** (*Optional*): The number of cells in series in the battery pack.
All options from :ref:`Sensor <config-sensor>`.
- **temperature_1** (*Optional*): The first temperature sensor.
All options from :ref:`Sensor <config-sensor>`.
- **temperature_2** (*Optional*): The second temperature sensor.
All options from :ref:`Sensor <config-sensor>`.
2022-04-03 09:30:25 +02:00
- **cell_1_voltage** (*Optional*): The voltage of cell number 1. Cell number can be from 1 to 16.
All options from :ref:`Sensor <config-sensor>`.
2022-04-03 09:30:25 +02:00
Text Sensor
-----------
Text sensor that indicates the status of BMS.
.. code-block:: yaml
text_sensor:
- platform: daly_bms
status:
name: "BMS Status"
Configuration variables:
************************
- **status** (*Optional*): The BMS Status (Charging, Discharging, Stationary).
All options from :ref:`Text Sensor <config-text_sensor>`.
2022-04-03 09:30:25 +02:00
Binary Sensor
-------------
Binary sensor that indicates the status of MOS.
.. code-block:: yaml
binary_sensor:
- platform: daly_bms
charging_mos_enabled:
name: "Charging MOS"
discharging_mos_enabled:
name: "Discharging MOS"
Configuration variables:
************************
- **charging_mos_enabled** (*Optional*): The BMS charging MOS status to enable the recharge of the battery.
All options from :ref:`Binary Sensor <config-binary_sensor>`.
- **discharging_mos_enabled** (*Optional*): The BMS discharging mos status to enable the load.
All options from :ref:`Binary Sensor <config-binary_sensor>`.
Control BMS
-----------
At this moment Daly sensor platform don't suppport controlling you BMS, but you can make some stuff using uart.write
First you need to setup binary sensors for charging and disharging MOS
.. code-block:: yaml
binary_sensor:
- platform: daly_bms
charging_mos_enabled:
name: "Daly Charging MOS"
id: bin_daly_chg_mos # binary MOS sensor must have ID to use with switch
internal: True # but you can make it internal to avoid duplication
discharging_mos_enabled:
name: "Daly Discharging MOS"
id: bin_daly_dischg_mos # binary MOS sensor must have ID to use with switch
internal: True # but you can make it internal to avoid duplication
Then you can add switches
.. code-block:: yaml
switch:
- platform: template
name: "Daly Charging MOS"
lambda: |-
if (id(bin_daly_chg_mos).state) {
return true;
} else {
return false;
}
turn_on_action:
- uart.write:
data: [0xA5, 0x40, 0xDA, 0x08, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8]
- logger.log:
format: "Send cmd to Daly: Set charge MOS on"
turn_off_action:
- uart.write:
data: [0xA5, 0x40, 0xDA, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC7]
- logger.log:
format: "Send cmd to Daly: Set charge MOS off"
- platform: template
name: "Daly Discharging MOS"
lambda: |-
if (id(bin_daly_dischg_mos).state) {
return true;
} else {
return false;
}
turn_on_action:
- uart.write:
data: [0xA5, 0x40, 0xD9, 0x08, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC7]
- logger.log:
format: "Send cmd to Daly: Set discharge MOS on"
turn_off_action:
- uart.write:
data: [0xA5, 0x40, 0xD9, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6]
- logger.log:
format: "Send cmd to Daly: Set discharge MOS off"
Also you can add select to change battery level
.. code-block:: yaml
select:
- platform: template
name: "Daly Battery Level setup"
optimistic: True
options:
- 100%
- 75%
- 50%
- 25%
- 0%
initial_option: 100%
set_action:
then:
- if:
condition:
lambda: 'return x == "100%";'
then:
- uart.write:
data: [0xA5, 0x40, 0x21, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xE8, 0xF9]
- logger.log:
format: "Send cmd to Daly: Set SOC to 100%"
else:
- if:
condition:
lambda: 'return x == "75%";'
then:
- uart.write:
data: [0xA5, 0x40, 0x21, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xEE, 0xFE]
- logger.log:
format: "Send cmd to Daly: Set SOC to 75%"
else:
- if:
condition:
lambda: 'return x == "50%";'
then:
- uart.write:
data: [0xA5, 0x40, 0x21, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xF4, 0x03]
- logger.log:
format: "Send cmd to Daly: Set SOC to 50%"
else:
- if:
condition:
lambda: 'return x == "25%";'
then:
- uart.write:
data: [0xA5, 0x40, 0x21, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFA, 0x08]
- logger.log:
format: "Send cmd to Daly: Set SOC to 25%"
else:
- if:
condition:
lambda: 'return x == "0%";'
then:
- uart.write:
data: [0xA5, 0x40, 0x21, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E]
- logger.log:
format: "Send cmd to Daly: Set SOC to 0%"
2022-04-03 09:30:25 +02:00
UART Connection
---------------
Connect RX from BMS to TX in ESP board and TX from BMS to RX in ESP board
.. figure:: images/daly_bms_pinout.png
:align: center
:width: 100.0%
Uart Pinout.
**3.3v Warning:** some BMS 3.3v cant source large currents and may not work to properly power the ESP. If you are having WIFI connection issues or similar, try a different power source. There is 12-15v available on the Daly connector which via a proper step-down converter can properly power the ESP.
On the ESP32 (untested on ESP8266) if you are having missing data (such as Temperature 1/2), it may be due to UART buffer size.
Add the following to your configuration to increase the buffer from the default 256 to 512.
.. code-block::
uart:
...
rx_buffer_size: 512
See Also
--------
- :ref:`sensor-filters`
- :apiref:`daly_bms/daly_bms.h`
- :ghedit:`Edit`